Our Products
The Model 100 and 101 standard in-line flanged sight flows incorporate all the features shown on the front cover of the Sight Flow Indicator section and are available in 316 stainless steel (wetted parts) or carbon steel. Pipe line sizes are available up to 20 inches. Our Model 101 has face-to-face dimensions to match other manufacturers (specify when ordering.)
The Series LG-1170 General Purpose Level Gauge offers a 360-degree unobstructed view of a vessels contents. These moderately priced level gauges are made in your specified length up to 16.5 feet and are available in a variety of connection materials and configurations also to your specifications.
The PTFE lined relief valves were developed for use on systems requiring the corrosion resistance compatibility offered by PTFE. The operating principle is the same as used in our regular line of corrosion resistant relief valves made of borosilicate glass.
This completely new concept of relief valve seat construction provides a pressure seal of the seat to plunger. The sealing pressure increases as the inlet pressure builds up. This is accomplished by the lip on the inside diameter of the seat pressing against the side of the plunger.
Precise Split very low hold-up, High power solenoid, 35 gpm model, Automatic controller, Only one moving part, Fail-safe design, Adaptable to any size column, Interchangeable, Easily maintained
The splitter is electrically operated by a timer and a solenoid which provide accurate control. Reflux splitters facilitate measurement and control at a single station, streamlining your system. The precision timer has an adjustable ratio of 1:1 and 1:120 seconds. This timer is available in general purpose or Class 1, Group D enclosure.
The splitter is electrically operated by a timer and a solenoid which provide accurate control. Reflux splitters facilitate measurement and control at a single station, streamlining your system. The precision timer has an adjustable ratio of 1:1 and 1:120 seconds. This timer is available in general purpose or Class 1, Group D enclosure.
The Model 100 and 101 standard in-line flanged sight flows incorporate all the features shown on the front cover of the Sight Flow Indicator section and are available in 316 stainless steel (wetted parts) or carbon steel. Pipe line sizes are available up to 20 inches. Our Model 101 has face-to-face dimensions to match other manufacturers (specify when ordering.)
We have unique medium-sized low-temperature freezers with refrigeration temperature range from -5C to -150C. It is a completely safe, reliable and a rapid cooling for the liquid which is widely used in petrochemical, medical, pharmaceutical, biochemical and freeze-dried, military and other high-tech industries.
FeaturesProducts - Large tanks, vessels, reactors, agitators, Columns, Heat exchangers. Our shell , Carbon steel, SS-316, SS -304 , Vessel and reactor capacities 500 litres to 1, 00, 000 litres. Column diameters upto 2000 mm , centrifuge basket, coiling coils etc
This series of check valves was developed for use on fluids compatible with the corrosion resistant characteristics of virgin PTFE. The body of the valve is made from a combination of ductile iron and steel.
This series of check valves was developed for use on fluids compatible with the corrosion resistant characteristics of virgin PTFE. The body of the valve is made from a combination of ductile iron and steel.
The whole system we adopt is fully closed piping design, high efficiency plate heat exchanger used to reduce the demand of thermal fluid as well as greatly increase utilization of heat in order to achieve rapid ups and downs in temperature. The system with an expansion vessel, and the heatconducting medium in the expansion vessel does not participate in liquid circulation, whatever the temperature is high temperature or low temperature, the expansion tank is limited to 60C. The working life and properties of the thermal fluid are also protected, by avoiding direct contact between the hot fluid and atmosphere.
OverviewThis product is Mainly Used In Industrial Refrigerating Treatment So That The Matrix Of The Metal Structure Generates a Uniform, Fine And Dispersed Precipitation.
The Precipitation Of Carbide Will Improve The Abrasion Resistance, Friction Performance And Increase Hardness Of Metal. Carbide Is an Ideal Alternative To Liquid Nitrogen. For the copper sleeve and bearings contracting, it is widely used in precise mechanical assembly. It can be applied to variety of large scale equipment(cars, large engineering machineries, aircraft component, Aerospace equipment parts, Military equipment parts etc.) for their specific lower temperature test.
OverviewA fully closed piping design, high efficiency plate heat exchanger used to reduce the demand for the thermal fluid utilization while providing the system to achieve the rapid ups and downs in temperature The whole system is a closed liquid circulation system with the expansion of container, expansion of the container and the liquid circulation is adiabatic, and do not participate in liquid circulation, only mechanical
It is mainly used for scientific research, special materials of low temperature test and preservation; freezing of red blood cells, white blood cells, skin, bacteria, semen, biological products, ocean products and electronic components; special glue, special materials low temperature preservation and test.
It is mainly used in blood stations, hospitals, health and epidemic prevention departments, research institutes, electronics industry, chemical medicine, biological engineering, laboratory, military industrial enterprises etc.