Product / Services
Post Buy Requirement
JM
Jagdish Metal
Mumbai, Maharashtra, India
Add Review
Call Now

Our Products

  1. 299 Products available

Our Products #4801948

Aluminium 5086 Sheet

Aluminium 5086 Sheet
  • Temper O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114, H 116, H321
  • Width 100-2600mm
  • Length 500-10000mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
  • Standards ASTM B209 / ASME SB209
  • Thickness 0.15-600mm
  • Surface Bright, polished, hair line, brush, sand blast, embossed, etching
  • Finish Mill, Customer specific finish
  • Aluminum Sheet/ Plate Coating PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating

Aluminium 5086 Sheets Chemical Composition

Si Fe Cu Mn Mg Cr Zn Ti Others, each Others, total Al
0.4 0.5 0.1 0.20-0.70 3.5-4.5 0.05-0.25 0.25 0.15 0.05 0.15 Balance

Mechanical Properties of Aluminum 5086 Sheets

Proof Stress Tensile Strength Hardness Brinell Elongation
125 Min MPa 275 - 350 MPa 75 HB 12 Min %

 

View Complete Details
Ask Latest Price & Details
Aluminium 5052 Plate

Aluminium 5052 Plate
  • Thickness 0.2-250mm
  • Width 100-2600mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
  • Standards ASTM B209 / ASME SB209
  • Temper O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114, H 116, H321
  • Length 500-10000mm
  • Surface Bright, polished, hair line, brush, sand blast, embossed, etching
  • Finish Mill, Customer specific finish
  • Aluminum Plate Coating PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating

Aluminium 5052 Plates Chemical Composition
Si Fe Cu Mn Mg Cr Zn Ti Al
0.50 0.50 3.8/4.9 0.30/0.9 1.2/1.8 0.10 0.25 0.15 Balance
Mechanical Properties of Aluminum 5052 Plates
Hardness, Brinell Poisson's Ratio Melting Point Electrical Resistivity Modulus of Elasticity Specific Heat
47 0.33 607 - 649 °C 4.99e-006 ohm-cm 70.3 GPa 0.88 J/g-°C

 

View Complete Details
Ask Latest Price & Details
Aluminium 1070 Hex Bars

Aluminium 1070 Hex Bars
  • Length 1000-6000mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
  • Standards ASTM B221, B211, B565, B316, AMS 4121 2014
  • Size 5 mm To 500 mm
  • Diameter 6-150mm
  • Finish Bright, Polish & Black

Mechanical Properties of Aluminum 1070 Hex Bars
Properties  Conditions 
T (°C) Treatment
Density (×1000 kg/m3) 7.7-8.03 25  
Poisson's Ratio 0.27-0.30 25  
Elastic Modulus (GPa) 190-210 25  
Tensile Strength (Mpa) 640   25   cold drawn, spheroidized annealed   more
Yield Strength (Mpa) 495  
Elongation (%) 10 
Reduction in Area (%) 45 
Hardness (HB) 192  25   cold drawn, spheroidized annealed   more
Properties  Conditions 
T (°C) Treatment
Thermal Expansion (10-6/ºC) 11.8   0-100   more rolled 
View Complete Details
Ask Latest Price & Details
Aluminium 1060 Pipes

Aluminium 1060 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Thickness SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper H14
  • Standard AMS QQ-A-200/8, AMS QQ-A-200/9, AMS 4160/4161/4172
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 1060 Pipes Chemical Composition
Aluminium 1060 Fe Si Mg Mn Cu Zn Ti Al
0.15 - 0.20 0.10 - 0.15 0.01 - 0.03 0.01 - 0.03 0.01 - 0.05 0.01 - 0.03 0.020 - 0.030 99.60
Mechanical Properties of Aluminum 1060 Pipes
Mechanical Properties - Al 1060
Alloy Temper UTS(Mpa) % Elongation
Min Max 0.5 mm -0.8 mm 0.81 mm - 1.30 mm 1.30 mm - above
1060 O 55 75 25 25 30
H12 75 110 6 6 7
H14 90 120 5 5 6
H16 95 130 4 4 4
H18 130 --- 3 3 3 23
View Complete Details
Ask Latest Price & Details
Aluminium 1070 Pipes

Aluminium 1070 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Thickness SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper H14
  • Standard AMS QQ-A-200/8, AMS QQ-A-200/9, AMS 4160/4161/4172
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 1070 Pipes Chemical Composition
Aluminium 1070 Fe Si Mg Mn Cu Zn Ti Al
0.25 0.2 0.03 0.03 0.03 0.07 0.03 99.70
Mechanical Properties of Aluminum 1070 Pipes
Properties  Conditions 
T (°C) Treatment
Density (×1000 kg/m3) 7.7-8.03 25  
Poisson's Ratio 0.27-0.30 25  
Elastic Modulus (GPa) 190-210 25  
Tensile Strength (Mpa) 640   25   cold drawn, spheroidized annealed   more
Yield Strength (Mpa) 495  
Elongation (%) 10 
Reduction in Area (%) 45 
Hardness (HB) 192  25   cold drawn, spheroidized annealed   more
View Complete Details
Ask Latest Price & Details
Aluminium 1100 Pipes

Aluminium 1100 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Thickness SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper H14
  • Standard AMS QQ-A-200/8, AMS QQ-A-200/9, AMS 4160/4161/4172
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 1100 Pipes Chemical Composition
Alloy Fe Si Mg Mn Cu Zn Ti Cr Others AI
1100 (min) 0.35 0.25 0.01 0.01 0.05 0.01 0.020 Trace 0.05 (each) 99.60%
1100 (max) 0.50 0.35 0.03 0.05 0.20 0.05 0.030 Trace 0.15 (total) remainder
Mechanical Properties of Aluminum 1100 Pipes
Alloy Temper UTS(Mpa) % Elongation
Min Max 0.5 mm -0.8 mm 0.81 mm - 1.30 mm 1.30 mm - above
1100 O 75 110 20 25 29
H12 95 130 5 6 7
H14 110 145 3 4 5
H16 130 165 2 3 4
H18 150 --- 2 2 3
View Complete Details
Ask Latest Price & Details
Aluminium 2014 Pipes

Aluminium 2014 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Thickness SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper T6 T651 T6511
  • Standard AMS QQ-A-200/8, AMS QQ-A-200/9, AMS 4160/4161/4172
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 2014 Pipes Chemical Composition
Aluminium 2014 Fe Si Mg Mn Cu Zn Ti Al
0.7 0.50 - 1.20 0.2 - 0.8 0.4 - 1.2 3.9 - 5.0 0.25 0.15 93.5
Mechanical Properties of Aluminum 2014 Pipes
Material Temper Diameter (mm) Tensile Strength min ((N/mm²) Yield Strength (min) (N/mm²) Elongation on 5.65 V (min)
2014 Pipes T4 <20 370 230 11
2014 Pipes T4 20-75 390 250 11
2014 Pipes T4 75-150 390 250 9
2014 Pipes T4 150-200 370 230 8
2014 Pipes T6510 20-75 480 435 7
2014 Pipes T6510 75-150 465 420 7
View Complete Details
Ask Latest Price & Details
Aluminium 2017 Pipes

Aluminium 2017 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Thickness SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper T6 T651 T6511
  • Standard AMS QQ-A-200/8, AMS QQ-A-200/9, AMS 4160/4161/4172
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 2017 Pipes Chemical Composition
Al Si Fe Cu Mn Mg Cr Zn Ti Other Each Other Total
Bal. 0.20-0.8 0.7 max 3.5-4.5 0.40-1.0 0.40-0.8 0.10 max 0.25 max 0.15 max 0.05 max 0.15 max
Mechanical Properties of Aluminum 2017 Pipes
Material Condition Tensile Strength (N/mm²) min Yield Strength Elongation in 4D %
ksi Mpa ksi Mpa
Al 2017 2017-T4 Bar 55 379 32 221 12
View Complete Details
Ask Latest Price & Details
Aluminium 2024 Pipes

Aluminium 2024 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Thickness SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper H14
  • Standard AMS QQ-A-200/8, AMS QQ-A-200/9, AMS 4160/4161/4172
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 2024 Pipes Chemical Composition
Grade Al Si Fe Cu Mn Mg Cr Zn Ti Other
min. Bal     3.80 0.30 1.20        
max. Bal 0.50 0.50 4.90 0.90 1.80 0.10 0.25 0.15 0.05
Mechanical Properties of Aluminum 2024 Pipes
Temper Tensile Strength Yield Strength Elongation
  KSI KSI %
(annealed) 32 14 12
T3 63 42 15
View Complete Details
Ask Latest Price & Details
Aluminium 3003 Pipes

Aluminium 3003 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Thickness SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 3003 Pipes Chemical Composition
Al Cr Cu Fe Mg Mn Other Total Si Ti Zn
Remainder - 0.05 to 0.20% 0.7% - 1.0 to 1.5% 0.15% 0.6% - 0.10%
Mechanical Properties of Aluminum 3003 Pipes
Properties Metric Imperial
Tensile strength 130 MPa 18855 psi
Yield strength 125 MPa 18130 psi
Shear strength 83 MPa 12039 psi
Fatigue strength 55 MPa 7977 psi
Elastic modulus 70-80 GPa 10153-11603 ksi
Poisson's ratio 0.33 0.33
Elongation 10% 10%
Hardness 35 35
View Complete Details
Ask Latest Price & Details
Aluminium 5005 Pipes

Aluminium 5005 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Thickness SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 5005 Pipes Chemical Composition
GRADE Si Fe Cu Mn Mg Cr Zn Ti Al
5052 0.50 0.50 3.8/4.9 0.30/0.9 1.2/1.8 0.10 0.25 0.15 Balance
Mechanical Properties of Aluminum 5005 Pipes
Mechanical Property Hardness, Brinell Poisson's Ratio Melting Point Electrical Resistivity Modulus of Elasticity Specific Heat
Value 47 0.33 607 - 649 °C 4.99e-006 ohm-cm 70.3 GPa 0.88 J/g-°C
View Complete Details
Ask Latest Price & Details
Aluminium 5052 Pipes

Aluminium 5052 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Thickness SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper H32
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded
View Complete Details
Ask Latest Price & Details
Aluminium 5754 Pipes

Aluminium 5754 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper H32
  • Standard AMS QQ-A-200/8, AMS QQ-A-200/9, AMS 4160/4161/4172
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 5754 Pipes Chemical Composition
Mg Mn Si Cu Fe Cr Zn Ti Cu Other (Each) Others (Total) Al
2.60 - 3.60 0.0 - 0.50 0.0 - 0.40 0.0 - 0.40 0.0 - 0.30 0.0 - 0.20 0.0 - 0.15 0.0 - 0.10 0.0 - 0.05 0.0 - 0.05 0.0 - 0.15 Balance
Mechanical Properties of Aluminum 5754 Pipes
Proof Stress Tensile Strength Elongation at 50 mm Hardness Brinell
80 Min MPa 190 - 260MPa 12 Min % 52 HB
View Complete Details
Ask Latest Price & Details
Aluminium 5082 Pipes

Aluminium 5082 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Thickness SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper H111 H116 O
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded
View Complete Details
Ask Latest Price & Details
Aluminium 5083 Pipes

Aluminium 5083 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper H111 H116 O
  • Standard AMS QQ-A-200/8, AMS QQ-A-200/9, AMS 4160/4161/4172
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 5083 Pipes Chemical Composition
Weight% Al Si Fe Cu Mn Cr Mg Ti Zn Other Each Others Total
5083 Bal 0.40 max 0.40 max 0.10 max 0.40 / 1.0 0.05 / 0.25 4.0 / 4.90 0.15 max 0.25 max 0.05 max 0.15 max
Mechanical Properties of Aluminum 5083 Pipes
Properties Proof Stress Tensile Strength Hardness Brinell Elongation
Metric 125 Min MPa 275 - 350 MPa 75 HB 12 Min %
View Complete Details
Ask Latest Price & Details
Aluminium 5086 Pipes

Aluminium 5086 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper H111 H116
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded
View Complete Details
Ask Latest Price & Details
Aluminium 6061 Pipes

Aluminium 6061 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper T6 T651 T6511
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded
View Complete Details
Ask Latest Price & Details
Aluminium 6063 Pipes

Aluminium 6063 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper T6 T651 T6511
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 6063 Pipes Chemical Composition
Cu Si Fe Mn Mg Zn Cr Ti Other Each Others Total Al
.10 (max) .20/.60 .35 (max) .10 (max) .45/.90 .10 (max) .10 (max) .10 (max) .05 .015 Remainder
Mechanical Properties of Aluminum 6063 Pipes
Tensile Strength (psi) Yield Strength (psi) Elongation (% in 2") Brinell Hardness
27,000 21,000 12 60
View Complete Details
Ask Latest Price & Details
Aluminium 6082 Pipes

Aluminium 6082 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper T6 T651 T6511
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded

Aluminium 6082 Pipes Chemical Composition
Weight% Al Si Fe Cu Mn Cr Mg Zn Ti Other Each Others Total
Aluminium 6082 Bal 0.7 - 1.3 0.50 max 0.10 max 0.40-1.00 0.25 max 0.06-1.20 0.20 max 0.10 max 0.05 max 0.15 max
Mechanical Properties of Aluminum 6082 Pipes
Diameter or minor sectional dimension mm Tensile Strength, MPa Yield Strength 0.2%, MPa  Elongation %
0-20 295 255 8
20-150 310 270 8
150-200 280 240 5
View Complete Details
Ask Latest Price & Details
Aluminium 6083 Pipes

Aluminium 6083 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Thickness SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper T6 T651 T6511
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded
View Complete Details
Ask Latest Price & Details
Aluminium 7075 Pipes

Aluminium 7075 Pipes
  • Size 8 (1-1/2″ / 1.900″)
  • Length Double Random, Single Random, Cut Length
  • Standards ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Temper T6 T651 T6511
  • Outer Diameter 1″ through 16″
  • End Plain End, Beveled End, Threaded
View Complete Details
Ask Latest Price & Details
Aluminum Alloy Plates

Aluminum Alloy Plates
360 /Piece Get Latest Price
  • Thickness 1- 5 mm
  • Shape Rectangular
  • Material Aluminum Alloy
  • Size 8 x 4 Feet
  • Tensile Strength 310 - 350 Mpa
  • Usage/Application Industrial
View Complete Details
Ask Latest Price & Details
Aluminum Coils

Aluminum Coils
290 /Kilogram Get Latest Price
  • Min. Order (MOQ) 50 Kilogram
  • Material Aluminum
  • Thickness 0.46 - 4 mm
  • Width 4 Feet
  • Surface Treatment Polished
  • Material Grade 6061
  • Technique Cold Rolled
  • Features Corrosion Resistant
  • Usage/Application Industrial
  • Brand Jagdish Metal
View Complete Details
Ask Latest Price & Details
Aluminium Round Tube

Aluminium Round Tube
290 /Kilogram Get Latest Price
  • Grade 1000 Series
  • Shape Round
  • Material Aluminium
  • Thickness 2 - 4 mm
  • Unit Length 3 - 6 meter
  • Surface Finish Mill Finished
  • Size 1 - 3 inch
View Complete Details
Ask Latest Price & Details
Aluminum Round Pipes

Aluminum Round Pipes
315 /Kilogram Get Latest Price
  • Size 1/2 - 3 inch
  • Shape Round
  • Material Aluminum
  • Brand Jagdish Metal
  • Surface Treatment Galvanized
  • Unit Length 12 m, 6 m
View Complete Details
Ask Latest Price & Details
Aluminium 1200 Foil

Aluminium 1200 Foil
  • Thickness 0.018-0.2mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Foil
  • Standards ASTM B479 / ASME SB479
  • Temper O, H14, H16, H18, H19, H22, H24
  • Length 100-1600mm
  • Surface Bright, polished, hair line, brush, sand blast, embossed, etchin
  • Finish Mill, Customer specific finish
  • Aluminum Foil Coating PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating
View Complete Details
Ask Latest Price & Details
Aluminum Alloy Sheets

Aluminum Alloy Sheets
360 /Piece Get Latest Price
  • Material Aluminum Alloy
  • Shape Square
  • Thickness 1/2 - 2 inch
  • Brand Jagdish Metal
  • Dimensions 4 x 4 Feet
  • Usage/Application Construction
  • Surface Finish Powder Coated
View Complete Details
Ask Latest Price & Details
Aluminum Checkered Plates

Aluminum Checkered Plates
290 /Kilogram Get Latest Price
  • Thickness 4 - 10 mm
  • Material Aluminum
  • Shape Rectangular
  • Design/Pattern Checkered
  • Usage/Application Construction
  • Length 3 - 6 meter
  • Surface Finishing Powder Coated
View Complete Details
Ask Latest Price & Details
Aluminum Elbow

Aluminum Elbow
500 /Piece Get Latest Price
  • Material Aluminium
  • Country of Origin Made in India
  • Size 1/2 inch
  • Elbow Bend Angle 90 degree
  • End Connection Type Buttweld
View Complete Details
Ask Latest Price & Details
Aluminium 8011 Foil

Aluminium 8011 Foil
  • Thickness 0.01-0.5mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Foil
  • Standards ASTM B479 / ASME SB479
  • Temper O, H14, H16, H18, H19, H22, H24
  • Length 20-1600mm
  • Surface Bright, polished, hair line, brush, sand blast, embossed, etching
  • Finish Mill, Customer specific finish
  • Aluminum Foil Coating PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating

Mechanical Properties of Aluminum 8011 Foils
Material Temper Tensile Strength (ksi) Yield Strength (ksi) Elongation in 2" %
Aluminium Alloy 8011 Angle (AMS 4340) T76511 79 69 7
Aluminium Alloy 8011 Angle (AMS 4340) T73511 70 60 8
Aluminium Alloy 8011 Angle (AMS 4342) T74511 73 63 7

 

View Complete Details
Ask Latest Price & Details
Aluminium 19000 Foil

Aluminium 19000 Foil
  • Thickness 0.018-0.2mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Foil
  • Standards ASTM B479 / ASME SB479
  • Temper O, H14, H16, H18, H19, H22, H24
  • Length 100-1600mm
  • Surface Bright, polished, hair line, brush, sand blast, embossed, etching
  • Finish Mill, Customer specific finish
  • Aluminum Foil Coating PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating
View Complete Details
Ask Latest Price & Details
Aluminium 1060 Wires

Aluminium 1060 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding

Aluminium 1060 Wires Chemical Composition
Aluminium 1060 Fe Si Mg Mn Cu Zn Ti Al
0.15 - 0.20 0.10 - 0.15 0.01 - 0.03 0.01 - 0.03 0.01 - 0.05 0.01 - 0.03 0.020 - 0.030 99.60
Mechanical Properties of Aluminum 1060 Wires
Mechanical Properties - Al 1060
Alloy Temper UTS(Mpa) % Elongation
Min Max 0.5 mm -0.8 mm 0.81 mm - 1.30 mm 1.30 mm - above
1060 O 55 75 25 25 30
H12 75 110 6 6 7
H14 90 120 5 5 6
H16 95 130 4 4 4
H18 130 --- 3 3 3
View Complete Details
Ask Latest Price & Details
Aluminium 1070 Wires

Aluminium 1070 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding

Aluminium 1070 Wires Chemical Composition
Aluminium 1070 Fe Si Mg Mn Cu Zn Ti Al
0.25 0.2 0.03 0.03 0.03 0.07 0.03 99.70
Mechanical Properties of Aluminum 1070 Wires
Mechanical Properties - Al 1070
Properties  Conditions 
T (°C) Treatment
Density (×1000 kg/m3) 7.7-8.03 25  
Poisson's Ratio 0.27-0.30 25  
Elastic Modulus (GPa) 190-210 25  
Tensile Strength (Mpa) 640   25   cold drawn, spheroidized annealed   more
Yield Strength (Mpa) 495  
Elongation (%) 10 
Reduction in Area (%) 45 
Hardness (HB) 192  25   cold drawn, spheroidized annealed   more
View Complete Details
Ask Latest Price & Details
Aluminium 1100 Wires

Aluminium 1100 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding

Aluminium 1100 Wires Chemical Composition
Alloy Fe Si Mg Mn Cu Zn Ti Cr Others AI
1100 (min) 0.35 0.25 0.01 0.01 0.05 0.01 0.020 Trace 0.05 (each) 99.60%
1100 (max) 0.50 0.35 0.03 0.05 0.20 0.05 0.030 Trace 0.15 (total) remainder
Mechanical Properties of Aluminum 1100 Wires
Alloy Temper UTS(Mpa) % Elongation
Min Max 0.5 mm -0.8 mm 0.81 mm - 1.30 mm 1.30 mm - above
1100 O 75 110 20 25 29
H12 95 130 5 6 7
H14 110 145 3 4 5
H16 130 165 2 3 4
H18 150 --- 2 2 3
View Complete Details
Ask Latest Price & Details
Aluminium 2014 Wires

Aluminium 2014 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding
View Complete Details
Ask Latest Price & Details
Aluminium 2024 Wires

Aluminium 2024 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding

Aluminium 2024 Wires Chemical Composition
Grade Al Si Fe Cu Mn Mg Cr Zn Ti Other
min. Bal     3.80 0.30 1.20        
max. Bal 0.50 0.50 4.90 0.90 1.80 0.10 0.25 0.15 0.05
Mechanical Properties of Aluminum 2024 Wires
Temper Tensile Strength Yield Strength Elongation
  KSI KSI %
(annealed) 32 14 12
T3 63 42 15
View Complete Details
Ask Latest Price & Details
Aluminium 3003 Wires

Aluminium 3003 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding

Aluminium 3003 Wires Chemical Composition
Al Cr Cu Fe Mg Mn Other Total Si Ti Zn
Remainder - 0.05 to 0.20% 0.7% - 1.0 to 1.5% 0.15% 0.6% - 0.10%
Mechanical Properties of Aluminum 3003 Wires
Properties Metric Imperial
Tensile strength 130 MPa 18855 psi
Yield strength 125 MPa 18130 psi
Shear strength 83 MPa 12039 psi
Fatigue strength 55 MPa 7977 psi
Elastic modulus 70-80 GPa 10153-11603 ksi
Poisson's ratio 0.33 0.33
Elongation 10% 10%
Hardness 35 35
View Complete Details
Ask Latest Price & Details
Aluminium 5754 Wires

Aluminium 5754 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding
View Complete Details
Ask Latest Price & Details
Aluminium 5086 Wires

Aluminium 5086 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding
View Complete Details
Ask Latest Price & Details
Aluminium 6061 Wires

Aluminium 6061 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding
View Complete Details
Ask Latest Price & Details
Aluminium 6063 Wires

Aluminium 6063 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding

Aluminium 6063 Wires Chemical Composition
Cu Si Fe Mn Mg Zn Cr Ti Other Each Others Total Al
.10 (max) .20/.60 .35 (max) .10 (max) .45/.90 .10 (max) .10 (max) .10 (max) .05 .015 Remainder
Mechanical Properties of Aluminum 6063 Wires
Tensile Strength (psi) Yield Strength (psi) Elongation (% in 2") Brinell Hardness
27,000 21,000 12 60
View Complete Details
Ask Latest Price & Details
Aluminium 6083 Wires

Aluminium 6083 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding
View Complete Details
Ask Latest Price & Details
Aluminium 7050 Wires

Aluminium 7050 Wires
  • Length 10 - 10000 mtr
  • Standards ASTM B221, B211
  • Temper H14
  • Diameter 5.5 - 400 mm
  • Form Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths,
  • Treatment Cold Forming, Heat Treatment, Stress Relieving and Welding

Aluminium 7050 Wires Chemical Composition
Weight % Zn Cu Mg Zr Fe Si Mn Ti Cr Others (total)
Minimum 5.7   2.0 1.9 0.08  - - -  - -   -
Maximum 6.7 2.6 2.6 0.15 0.15 0.12 0.10 0.06 0.04 0.15
Mechanical Properties of Aluminum 7050 Wires
Material Temper Tensile Strength (ksi) Yield Strength (ksi) Elongation in 2" %
Aluminium Alloy 7050 Angle (AMS 4340) T76511 79 69 7
Aluminium Alloy 7050 Angle (AMS 4340) T73511 70 60 8
Aluminium Alloy 7050 Angle (AMS 4342) T74511 73 63 7
View Complete Details
Ask Latest Price & Details
Aluminium 1050 Sheet

Aluminium 1050 Sheet
  • Temper O, H12, H14, H16, H18, H19, H22, H24
  • Width 100-2600 mm
  • Length 500-10000 mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
  • Standards ASTM B209 / ASME SB209
  • Thickness 0.2-50 mm
  • Surface Bright, polished, hair line, brush, sand blast, embossed, etching
  • Finish Mill, Customer specific finish
View Complete Details
Ask Latest Price & Details
Aluminium 1060 Sheet

Aluminium 1060 Sheet
  • Temper O, H12, H14, H16, H18, H19, H22, H24
  • Width 100-2600 mm
  • Length 500-10000 mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
  • Standards ASTM B209 / ASME SB209
  • Thickness 0.2-50 mm
  • Finish Mill, Customer specific finish

Alloy Temper UTS(Mpa) % Elongation
Min Max 0.5 mm -0.8 mm 0.81 mm - 1.30 mm 1.30 mm - above
1060 O 55 75 25 25 30
H12 75 110 6 6 7
H14 90 120 5 5 6
H16 95 130 4 4 4
H18 130 --- 3 3 3
View Complete Details
Ask Latest Price & Details
Aluminium 1070 Sheet

Aluminium 1070 Sheet
  • Temper O, H12, H14, H16, H18, H19, H22, H24
  • Width 100-2600mm
  • Length 500-10000mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
  • Standards ASTM B209 / ASME SB209
  • Thickness 0.2-50mm
  • Surface Bright, polished, hair line, brush, sand blast, embossed, etching
  • Finish Mill, Customer specific finish
  • Aluminum Sheet/ Plate Coating PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating

Properties  Conditions 
T (°C) Treatment
Density (×1000 kg/m3) 7.7-8.03 25  
Poisson's Ratio 0.27-0.30 25  
Elastic Modulus (GPa) 190-210 25  
Tensile Strength (Mpa) 640   25   cold drawn, spheroidized annealed   more
Yield Strength (Mpa) 495  
Elongation (%) 10 
Reduction in Area (%) 45 
Hardness (HB) 192  25   cold drawn, spheroidized annealed   more
View Complete Details
Ask Latest Price & Details
Aluminium 1100 Sheet

Aluminium 1100 Sheet
  • Temper O, H12, H14, H16, H18, H19, H22, H24
  • Width 100-2600mm
  • Length 500-10000mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) SheetAluminium 1100 Sheets Chemical Composition Alloy Fe Si Mg Mn
  • Standards ASTM B209 / ASME SB209
  • Thickness 0.2-127mm
  • Surface Bright, polished, hair line, brush, sand blast, embossed, etching
  • Finish Mill, Customer specific finish
  • Aluminum Sheet/ Plate Coating PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating
View Complete Details
Ask Latest Price & Details
Aluminium 2014 Sheet

Aluminium 2014 Sheet
  • Temper O, T3, T4, T6, T651
  • Width 100-2600mm
  • Length 500-10000mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
  • Standards ASTM B209 / ASME SB209
  • Thickness 0.2-250mm
  • Surface Bright, polished, hair line, brush, sand blast, embossed, etching
  • Finish Mill, Customer specific finish
  • Aluminum Sheet/ Plate Coating PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating

Aluminium 2014 Sheets Chemical Composition

Alloy Si Fe Cu Zn Mn Mg Ti Other Cr Ni Others Ti+Zr Al
2014 (min) (max) 0.50 - 0.90 0.0 - 0.50 3.90 - 5.00 0.0 - 0.25 0.40 - 1.20 0.20 - 0.80 0.0 - 0.15 0.0 - 0.15 0.0 - 0.10 0.0 - 0.10 0.0 - 0.05 0.0 - 0.20 Balance

Mechanical Properties of Aluminum 2014 Sheets

Alloy Temper UTS (Mpa) Yield Strength (Mpa) Elongation (%)
- - Minimum Maximum Minimum Maximum A 50mm (Minimum)
EN AW-2014 O – 250 – 135 10
T4 370 – 230 – 11

 

View Complete Details
Ask Latest Price & Details
Aluminium 2017 Sheet

Aluminium 2017 Sheet
  • Temper O, T3, T4, T6, T651
  • Width 100-2600mm
  • Length 500-10000mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
  • Standards ASTM B209 / ASME SB209
  • Thickness 0.2-250mm
  • Surface Bright, polished, hair line, brush, sand blast, embossed, etching
  • Finish Mill, Customer specific finish
  • Aluminum Sheet/ Plate Coating PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating
View Complete Details
Ask Latest Price & Details
Aluminium 2024 Sheet

Aluminium 2024 Sheet
  • Temper O, T3, T4, T6, T651
  • Width 100-2600mm
  • Length 500-10000mm
  • Type Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
  • Standards ASTM B209 / ASME SB209
  • Thickness 0.2-250mm
  • Surface Bright, polished, hair line, brush, sand blast, embossed, etching
  • Finish Mill, Customer specific finish
  • Aluminum Sheet/ Plate Coating PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating

Aluminium 2024 Sheets Chemical Composition

Grade Al Si Fe Cu Mn Mg Cr Zn Ti Other
min. Bal     3.80 0.30 1.20        
max. Bal 0.50 0.50 4.90 0.90 1.80 0.10 0.25 0.15 0.05

Mechanical Properties of Aluminum 2024 Sheets

Temper Tensile Strength Yield Strength Elongation
  KSI KSI %
(annealed) 32 14 12
T3 63 42 15

 

View Complete Details
Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Satish Bothra (Jagdish Metal)
  • 226/06, 1st Floor, Sambhavdarshan Building Raja Ram Mohan Roy Marg, Prarthna Samaj, Mumbai - 400004, Khetwadi, Maharashtra
  • Share us via
    Linkedin pinterest
View Contact No.