Post Buy Requirement
Jagruti Rubber Enterprise Pvt. Ltd.
Ahmedabad, Gujarat, India
Add Review

Conveyors & Conveyor Components #1305837

Conveyor Idler Frame

are used for conveying bulk materials, and are designed and manufactured with Troughing angels of 20, 35, 45, and any other angle are also manufactured as per customer's design and drawings.
View Complete Details

Rubber Skirting

  • Width 2, 000 mm
  • Thickness 50 mm
Skirting rubber is a general purpose rubber used mainly in the mining industry as a side skirt on conveyor belt systems to prevent the materials falling down.
It is available in full width slabs up to 2000 mm wide and also pre-cut skirting strips.
View Complete Details

Skirting Rubber

  • Width: 2, 000 mm
  • Thickness: 2 — 50 mm
  • Roll length: 3 — 30 m

Skirting rubber is a general purpose rubber used mainly in the mining industry as a side skirt on conveyor belt systems to prevent the materials falling down.


It is available in full width slabs up to 2000 mm wide and also pre-cut skirting strips


A general purpose grade of natural rubber used for many quarrying and mining applications in dust and spillage control.


A softer grade natural rubber, with good tensile and elongations properties, it is ideally suited for conveyor skirting applications where belting wear is of concern. The rubber is also used where a flexible, but abrasive resistant seal is required.

Type Hardness (Shore A)±5 Tensile Strength (Mpa) Elongation at break %

Skirting Rubber

70

2.5 to 6

300

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Chetan Patel (Jagruti Rubber Enterprise Pvt. Ltd.)
  • 20 Jagruti Estate, Opp.Ishwarkrupa WeighBridge, Nr.Revabhai Estate, C.T.M. Cross Road, N.H.No.-8, CTM, Ahmedabad, Gujarat - 380026, India
  • Share us via
Manufacturer of Conveyors & Conveyor Components from Ahmedabad, Gujarat by Jagruti Rubber Enterprise Pvt. Ltd.
Post Buy Requirement
Jagruti Rubber Enterprise Pvt. Ltd.
Ahmedabad, Gujarat, India
Add Review

Conveyors & Conveyor Components #1305837

Conveyor Idler Frame

are used for conveying bulk materials, and are designed and manufactured with Troughing angels of 20, 35, 45, and any other angle are also manufactured as per customer's design and drawings.
View Complete Details

Rubber Skirting

  • Width 2, 000 mm
  • Thickness 50 mm
Skirting rubber is a general purpose rubber used mainly in the mining industry as a side skirt on conveyor belt systems to prevent the materials falling down.It is available in full width slabs up to 2000 mm wide and also pre-cut skirting strips.
View Complete Details

Skirting Rubber

  • Width: 2, 000 mm
  • Thickness: 2 — 50 mm
  • Roll length: 3 — 30 m

Skirting rubber is a general purpose rubber used mainly in the mining industry as a side skirt on conveyor belt systems to prevent the materials falling down.

It is available in full width slabs up to 2000 mm wide and also pre-cut skirting strips

A general purpose grade of natural rubber used for many quarrying and mining applications in dust and spillage control.

A softer grade natural rubber, with good tensile and elongations properties, it is ideally suited for conveyor skirting applications where belting wear is of concern. The rubber is also used where a flexible, but abrasive resistant seal is required.

Type Hardness (Shore A)±5 Tensile Strength (Mpa) Elongation at break %

Skirting Rubber

70

2.5 to 6

300

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Chetan Patel (Jagruti Rubber Enterprise Pvt. Ltd.)
  • 20 Jagruti Estate, Opp.Ishwarkrupa WeighBridge, Nr.Revabhai Estate, C.T.M. Cross Road, N.H.No.-8, CTM, Ahmedabad, Gujarat - 380026, India
  • Share us via