Fitted with D.C. MOTOR but to work on 220 Volts AC with Variable Speed from 20R.P.M. to 120R.P.M. Approx. SECORE Jar Test Apparatus allows efficient and economical flocculation matter and collides in general and also has been specially designed for use in water treatment to correctly estimate the dosing of alum and such other coagulants for treatment of Water sewage and flock formation test in water Treatment plants. Heavy duty structural construction for rigidly and vibration-provide diffused cold light to flock Samples.

The gear chain for multiple spindle Drive gives same speed for all the stainless steel stirring paddle approx. 1”x 3” are attached to the rod having 10” long approx.: with lighting knob at top permit adjustment of paddle height spacing of approx.:6” in between rods permits use to 1000ml glass beaker which rest directly on bench.

The double basket enclosed with glass tube by clamps holder. The equipment basket work Up & Down the tablets in medium of water movement in glass beakers cap. 1lit. the vertical drive shaft moves Up & Down by 7.5cm driven by geared motor and control by speed regulator provided. The upper end of the shaft fitted horizontal strip with clamps on either side. These clamps hold glass vessels open at both end with S.S mesh wire sheave with rubber ring at lower end, witch drip in water. The apparatus built on sturdy M.S powder coated finished box fitted with acrylic water bath enclosed with glass beakers temp. Control by PID temp. Controller. The panel with all controls switches, indicator and digital timer and temp. With main cord and plug provided.  The apparatus Works on 220 volts A.C main.

Dissolution Rate Test Apparatus Manufactured By Our Company Consists of 4 Main Parts. the First Part of Tablet Dissolution Rate Test Apparatus is Water Bath with 500 Watt Heater Accompanied By Digital Temperature Control. the Second Part is Variable Speed Motors, with 30 M.m S.s Shaft with Digital R.p.m. Meter. the Third Part Dissolution Rate Test Apparatus is Its Cylindrical Glass Vessel with the Capacity of 1000ml and the Fourth Part is Imported Thick Acrylic Sheet Along with Transparent Cover At Top. the Stirrer Shafts of Dissolution Rate Test Apparatus Offered By Our Company Can Be Adjusted Up and Down Easily with Its Button Switch. We have Emerged as One of the Reliable Digital Dissolution Rate Test Apparatus Suppliers. Disslution Rate Test Equipment Six Stage

• The Apparatus Consists of 4 Main Parts.
• First is Water Bath with 500 Watt Heater with Digital Temperature Control.
• Second is Variable Speed Motars, with 30 M.M., S.S Shaft with Digital R.P.M. Meter.
• Third is Cylinderical Glass Vessel 1000 M.l.
• Fourth is Imported Thick Acrylic Sheet with Transparent Cover At Top.
• You Can Eassily Up and Dowen all the Stirrer Shafts with Help of Button Switch.

Features :

• Digital control panel gives a fine look to apparatus.
• Built on a sturdy powder coated M.S angle frame covered. with M.S. powder coated sheet.
• Transparent acrylic container with six glass vessels.
• Digital R.P.M. and temperature meters and touch button controller make it easy for operating.
• All stirrer shafts are made by a stainless steel.
• Industrial lab. use apparatus can be provided on order.

Fitted with D.C. MOTOR but to work on 220 Volts AC with Variable Speed from 20R.P.M. to 120R.P.M. Approx. SECORE Jar Test Apparatus allows efficient and economical flocculation matter and collides in general and also has been specially designed for use in water treatment to correctly estimate the dosing of alum and such other coagulants for treatment of Water sewage and flock formation test in water Treatment plants. Heavy duty structural construction for rigidly and vibration-provide diffused cold light to flock Samples.

The gear chain for multiple spindle Drive gives same speed for all the stainless steel stirring paddle approx. 1”x 3” are attached to the rod having 10” long approx.: with lighting knob at top permit adjustment of paddle height spacing of approx.:6” in between rods permits use to 1000ml glass beaker which rest directly on bench.

The double basket enclosed with glass tube by clamps holder. The equipment basket work Up & Down the tablets in medium of water movement in glass beakers cap. 1lit. the vertical drive shaft moves Up & Down by 7.5cm driven by geared motor and control by speed regulator provided. The upper end of the shaft fitted horizontal strip with clamps on either side. These clamps hold glass vessels open at both end with S.S mesh wire sheave with rubber ring at lower end, witch drip in water. The apparatus built on sturdy M.S powder coated finished box fitted with acrylic water bath enclosed with glass beakers temp. Control by PID temp. Controller. The panel with all controls switches, indicator and digital timer and temp. With main cord and plug provided.  The apparatus Works on 220 volts A.C main.

Dissolution Rate Test Apparatus Manufactured By Our Company Consists of 4 Main Parts. the First Part of Tablet Dissolution Rate Test Apparatus is Water Bath with 500 Watt Heater Accompanied By Digital Temperature Control. the Second Part is Variable Speed Motors, with 30 M.m S.s Shaft with Digital R.p.m. Meter. the Third Part Dissolution Rate Test Apparatus is Its Cylindrical Glass Vessel with the Capacity of 1000ml and the Fourth Part is Imported Thick Acrylic Sheet Along with Transparent Cover At Top. the Stirrer Shafts of Dissolution Rate Test Apparatus Offered By Our Company Can Be Adjusted Up and Down Easily with Its Button Switch. We have Emerged as One of the Reliable Digital Dissolution Rate Test Apparatus Suppliers. Disslution Rate Test Equipment Six Stage

• The Apparatus Consists of 4 Main Parts.
• First is Water Bath with 500 Watt Heater with Digital Temperature Control.
• Second is Variable Speed Motars, with 30 M.M., S.S Shaft with Digital R.P.M. Meter.
• Third is Cylinderical Glass Vessel 1000 M.l.
• Fourth is Imported Thick Acrylic Sheet with Transparent Cover At Top.
• You Can Eassily Up and Dowen all the Stirrer Shafts with Help of Button Switch.

Features :

• Digital control panel gives a fine look to apparatus.
• Built on a sturdy powder coated M.S angle frame covered. with M.S. powder coated sheet.
• Transparent acrylic container with six glass vessels.
• Digital R.P.M. and temperature meters and touch button controller make it easy for operating.
• All stirrer shafts are made by a stainless steel.
• Industrial lab. use apparatus can be provided on order.