Diamond Lapping Compounds are manufactured from mixing of fine diamond powder in a liquid or oil base which is used for cutting action and longer operation life. To maintain a constant viscosity over a wide temperature range these are specially formulated. These properties make the paste an efficient tool in the very high precision industries where finish and cleanliness are utmost important.Ferrous and non ferrous metals, Cemented carbide cutting tools, Plastic injection moulds, Tungsten carbide parts.

Diamond Needle Files are extremely sharp to give faster and more economical stock removal on hardened and non hardened steel, on carbides, ceramics, moulds, dieplates, punches, glass, quartz, carbon fibers, graphite, hard and precision stones. These are manufactured in a control and unique plating technology with mechanical support and are reliable tools for everyday use.

• cost cutting40 to 50%

In this Blade Type Diamond Dressers, Needle shaped diamonds are carefully selected and set manually in an appropriate pattern in several layers. The uniform thickness of the diamond needles and setting pattern ensure a constant effective width of the blade over the whole tool life to get constantly high surface finish.No resetting or re-lapping required, Reduce inventory, cost cutting up to 40 to 50%, These tools can be used completely without any requirement of maintenance.

• Country of OriginIndia
• TypeCbn Grinding Wheel
• MaterialAluminium
• ShapeRound

The Single Point Diamond Dressers is more versatile dressing tool, which is used for turning and dressing of grinding wheel. They are made of carefully selected raw diamonds mounted in holders by means of special bonds. The dressing tool takes care of two main functions, it removes abrasive grains which have become completely worn out, and it recreates the correct geometric shape of the grinding wheel.

For the accurate profiling of grinding wheel only chisel tools are preferred for these operation. These Chisel Type Diamond Dressers are manufactured with specially selected higher quality natural diamonds, which are used on Diaform, Akuform & similar machine.Always select the larger profile angle, Theses diamonds are sensitive to shock and impact, It May be fractured or broken by striking any hard substance, Protect and store the tool properly when not in use, Theses diamonds are sensitive to shock and impact, Protect and store the tool properly when not in use.

For the accurate profiling of grinding wheel only chisel tools are preferred for these operation. These Chisel Type Diamond Dressers are manufactured with specially selected higher quality natural diamonds, which are used on Diaform, Akuform & similar machine.Always select the larger profile angle, Theses diamonds are sensitive to shock and impact, It May be fractured or broken by striking any hard substance, Protect and store the tool properly when not in use, Theses diamonds are sensitive to shock and impact, Protect and store the tool properly when not in use.

Diamond Lapping Compounds are manufactured from mixing of fine diamond powder in a liquid or oil base which is used for cutting action and longer operation life. To maintain a constant viscosity over a wide temperature range these are specially formulated. These properties make the paste an efficient tool in the very high precision industries where finish and cleanliness are utmost important.Ferrous and non ferrous metals, Cemented carbide cutting tools, Plastic injection moulds, Tungsten carbide parts.

• Country of OriginIndia
• TypeCbn Grinding Wheel
• MaterialAluminium
• ShapeRound

• Depth0.01-0.04 mm.

Multipoint Diamond Dressers consist of number of natural diamonds of a good crystal character fixed into a special wear resistant bond. The diamonds can be arranged in different pattern in single layer or multiple layers depending upon the field of operation. Several diamond points in contact with the wheel face, reduce the unit pressure on each point resulting in a longer tool life with full utilization. Multipoint dressers are used for large wide grinding wheels

• cost cutting40 to 50%

In this Blade Type Diamond Dressers, Needle shaped diamonds are carefully selected and set manually in an appropriate pattern in several layers. The uniform thickness of the diamond needles and setting pattern ensure a constant effective width of the blade over the whole tool life to get constantly high surface finish.No resetting or re-lapping required, Reduce inventory, cost cutting up to 40 to 50%, These tools can be used completely without any requirement of maintenance.

The Single Point Diamond Dressers is more versatile dressing tool, which is used for turning and dressing of grinding wheel. They are made of carefully selected raw diamonds mounted in holders by means of special bonds. The dressing tool takes care of two main functions, it removes abrasive grains which have become completely worn out, and it recreates the correct geometric shape of the grinding wheel.