Write a Review
Our Products
Our Complete range of products are PE Cable Duct Pipes and Micro Duct Pipes.
Jain Co-Extrusion process was developed in-house by JAINS in their R&D facility during 1993.
Jain HDPE Ducts (permanently lubricated) is the result of innovative development in co-extrusion by JAINS.
It is the versatile and unique solution for High Speed Air Blowing of Optical Fibre Cable.
Jain Cable Ducts are manufactured with state-of-the-art machinery using latest processing technology and fulfill the performance requirement of National and International specifications.
Approved by BSNL under TEC specification G/CDS-08/02 November 2004.
Approved vendor and supplier to PGCIL, IOCL, GSPL, BSNL, MTNL Tata Tele, Hutch in India and also many customers in other countries as well. Can specially deliver tailor-made as per specifications to suit customers requirement.
Supplied in coils of various lengths upto to 110 mm.
Supplied with pre-inserted PP rope on request.
Jain Micro Ducts are specifically made for installation in the existing (new or old, empty or preoccupied) HDPE / PVC ducts by blowing, jetting or pulling technique. The ducts can be bunched & blown in various combinations & colors thus allowing extra channels for future cabling needs & increased pathway. Its low sliding friction aids in easier blowing & jetting of micro ducts & allows longer pulling distance thus increasing duct integrity resulting in quality installation at lower cost.
Jain Micro Ducts are available in 7mm, 10mm & 14 mm OD with different wall-thicknesses.
Micro ducts are available with permanently lubricated smooth inner wall or permanently lubricated ribbed inner wall.
Jain Anti-Rodent Duct
Ducts are generally installed by direct burial method. At many places rodents are present even at depth of more than one meter below ground level. Unlike human beings the front teeth of rodents grow throughout their life., hence to trim it they chew soft materials like PE & PVC pipes to keep their their teeth within size. This results in damages to the pipes & the cable in it. Jain anti rodents ducts provides the best solution to such problems by incorporating a bitterent in the pipe to dissuade rodents from chewing it. Antirodent ducts are tested at institute for Toxicological Studies, Pune for its antirodent properties. Antirodent ducts are available in various sizes starting from 32 mm onwards.
Jain Fire Retardant Duct
Our constant endavour in brining better products to our valued customers we are pleased to introduce Jain Fire Retardant Ducts manufacture as per UL94-V2 specification. State of art testing facility is available in house (flame chamber from Altas, USA) for conducting the fire retardant test.
| S.No. | Parameter | Specification / Tolerance |
| 1 | Density | 0.940 to 0.958 g/cc at 27ºC |
| 2 | Melt Flow Rate | 0.2 to 1.10 gm /10 Minute at 190ºC & 5 kg load |
| 3 | Minimum Bend Radius | No cracking, splitting, breaking or permanent reduction in diameter when bend to 180º at radius of 10 times the diameter |
| 4 | Internal Pressure Test | 5 Minutes at 27ºC & Induced stress at 3.8 mpa. |
| 5. | Internal Coefficient of friction | Max 0.1 at 6.8 Kg load |
Dimensions Dimensions (in mm) of Silicoat PE Micro Duct
| Nominal Size | Outer Diamter | Wall Thickness | Inner Layer Wall Thickness | Ovality | |||
| OD | ID | MIN | MAX | MIN | MAX | MIN | |
| 7.0 | 5.5 | 6.9 | 7.1 | 0.65 | 0.75 | 0.10 | 0.20 |
| 10.0 | 5.5 | 9.9 | 10.1 | 2.15 | 2.25 | 0.10 | 0.20 |
| 10.0 | 8.0 | 9.9 | 10.1 | 0.9 | 1.0 | 0.10 | 0.20 |
| 10.0 | 7.6 | 9.9 | 10.1 | 1.1 | 1.2 | 0.10 | 0.20 |
| 12.0 | 8.0 | 11.9 | 12.1 | 1.90 | 2.10 | 0.10 | 0.20 |
| 12.0 | 9.6 | 11.9 | 12.1 | 0.90 | 1.0 | 0.10 | 0.20 |
Roshan Shah (Jain Irrigation Systems Ltd.)
41 / 43, Jain House, Police Court Lane,, Fort, Mumbai, Maharashtra - 400001
Share us via
