Jameel Trading Company provides variety ofBucket Type, these type of Strainers are known for theirdurabilityandlong lasting lifeso it is prefered by clients all over the world.

• Low cost of ownership : Stainless stell base for longer life, low maintenance and minimal system downtime.


• No live steam loss : Achieved by self aligning valve and water seal.


• Erosion resistant : Improved design with simplified flow paths to reduce erosion.


• Effective condensate drainage : Modulating valve orifice mechanism that provides complete and immediate condensate removal under all positive pressure load conditions.


• Quick start-up : Integral air vent for maximum venting ofair to improve productivity.


• High Quality Product : Improved materials and surface finish offer a high quality product.


• Impact resistance : Strong float construction guaranteed against waterhammer.

Jameel Trading Company ia one of theauthorizeddealer ofThermodynamic Typein Chennai. Its popular among clients because of itslong lasting lifePerformanceand coustomers trust on our products.

• Low cost of ownership : Stainless stell base for longer life, low maintenance and minimal system downtime.


• No live steam loss : Achieved by self aligning valve and water seal.


• Erosion resistant : Improved design with simplified flow paths to reduce erosion.


• Effective condensate drainage : Modulating valve orifice mechanism that provides complete and immediate condensate removal under all positive pressure load conditions.


• Quick start-up : Integral air vent for maximum venting ofair to improve productivity.


• High Quality Product : Improved materials and surface finish offer a high quality product.


• Impact resistance : Strong float construction guaranteed against waterhammer.

Jameel Trading Company provides wide range of2 Piece Design Full Bore Lever Operated(Fire Safe), these type of valves are prefered by clients for itsdurabilityandlong lasting life. We are providing the valves with pressure classes, such as 150#, 300 and 600#.

• Manufacturing Std: BS 5351


• End Connection: Screwed Ends to BSP/BSPT/NPT Socket Weld Ends to ANSI B16.11


• Inspection and Testing Std: BS 6755(part-1)


• Fire Safe Design As Per BS 6755(part-11)/API 607 4TH Edition

Jameel Trading Company provides wide range ofHigh performance Valves, these type of valves are prefered by clients for itsheavy-duty, automatic throttling control flowfor applications involving large flow rates and moderate pressure drops. It incorporates the two basic features of the high performance butterfly valve types: a PTFE, RTFE, or metal seal ring instead of a liner and double offset (eccentric operation) to reduce seal friction and operating torque and provide superior performance .We provide some of the high performance valves like Handle Operated Spherical Disc Valve and Worm Gear Operated Spherical Disc Valve too.

• Size Range: 1.1/2 to 48


• Construction type: Double Eccentric Disc Design


• Body: WCB / CF8 / CF8M / CAST IRON


• Disc: WCB / CF8 / CF8M


• Seat: PTFE (available EPDM/Metal to Metal)


• Shaft: AISI 410/ 304/ 316


• Plate Mounting: NAMUR Standard


• Pressure Rating: ANSI 150 Class, ANSI 300 Class(On Request)


• End Connection: Wafer/ Sandwiched, Lug type (On Request)


• Operating Temp. Range: -25 to 180(Soft Seating), -25 to 600 (Metal to Metal Seating)


• Operating: Hand Lever, Worm Gera box, Pneumatic Actuated, Electrical Actuated

Jameel Trading Company provides wide range ofWorm Gear Operated Valve, these type of valves are prefered by clients for itsdurabilityandlong lasting life. We are providing the valves which can withstand pressure.

• Size Range: 1.1/2 to 20


• Body: C.I. (IS 210 Gr. FG 200/220) WCB


• Disc: CF8/CF8M/CF3M/WCM/Powder Coated


• Seat: Metal to Metal


• Shaft: AISI 410/ASTM A351/CF8/CF8M/CF3M


• Valve Type: Centric Disc Butterfly Valve with Metal to Metal


• Body Type: Short Water (Sandwiched between flanges)


• Seat Type: Metal to Metal


• End Connection: Wafer Sandwiched(Lug Type On Request)


• Pressure Rating: PN 10(Maximum)


• Oper. Temp. Range: -25 C to 200 C(depending on MOC) upto 600 C


• Seat Leakage: Tight shut off (Batter then Class) 0.5%


• Operation: Hand lever for sizes form 40 MM to 150 MM Worm gear boxes for 200 MM to 300 MM

Jameel Trading Company provides wide range ofPneumatic Cylinders, these are prefered by clients for itsdurabilityandlong lasting life.

• Hard anodized aluminum profile(square) type and profile(round) type cylinder barrel.


• Bore size 32 to 250 mm.


• Adjustable cushioning at both ends with elastomer pads.


• Magnetic and non-magnetic cylinder.


• Wide range of mountings as per VDMA 24562 standards.


• Magnetic sensor common for all sizes.


• Modern design and consistent engineering.


• Double slots on 3 sides of cylinder position sensors.


• An extensive range of mounting accessories make it possible to install the solution virtually anywhere.


• Allen screws with internal thread for mounting components.


• Additional cushioning rings in the end-positions for absorbing residual energy from high speeds and fast machine cycles.

Jameel Trading Company ia one of theauthorizeddealer ofINDUSTRIAL THERMOMETERin Chennai. Its popular among clients because of itslong lasting lifePerformanceand coustomers trust on our products.

• STAINLESS STEEL CASE & STEM


• STEM LENGTH AVAILABLE FROM 50 MM l BOTTOM / BACK / EVERY ANGLE ENTRY l SILICON OIL FILLED (OPTIONAL)


• WITH OR WITHOUT THERMOWELL


• EXTERNAL ZERO ADJUSTMENT (OPTIONAL)


• STANDARD FOLLOWED EN 13190.

Jameel Trading Company ia one of theauthorizeddealer ofPressure and Differential Switchin Chennai, engineered for multiple ON/OFF operation in the down stream. Its popular among clients because of itslong lasting lifePerformanceand coustomers trust on our products.

• Long Lasting Life


• Accurate

Jameel Trading Company provides wide range ofHDPA Valve - Flange, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• AVAILABLE SIZE : 'h"" to 8"


• CONSTRUCTION :3 piece design, Single piece stem (Spindle) Reinforced Ball, Teflon seated, full bore.


• DESIGN AND MANUFACTURING STD.:As per Manufacturer's Standard


• END CONNECTIONS :Flanged as per ANSI B 16.5 (150 #) & as per BS 10 (Table D/E/F) & DIN STD, Screw Ends (BSP thread )

Jameel Trading Company provides wide range ofFlow Indicator, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• CONSTRUCTION :3 piece Design, Full Bore, Borosil Glass, Teflon Seated


• DESIGN AND MANUFACTURING STD.: As per Manufacturer's Standard


• END CONNECTIONS :Flanged as per ANSI B 16.S (1SO #) & as per BS 10 (Table D/EIF) & DIN STD.

Jameel Trading Company provides wide range ofMagnetic Driven Water Meter (Single Jet), these are prefered by clients for itsdurabilityandlong lasting life.

• Is an inferential single jet, super dry, straight reading type, hermetically sealed water meter with magnetic drive totaliser.


• Standards: It complies with IS : 779/94 & Class B of ISO : 4064 & EEC


• Brass body and Coupling


• Plastic cap and lid.


• Sealed against tampering


• Leakproff totally dry


• Totalliser can be oriented around 360 for easy reading

Jameel Trading Company provides variety ofMechanical Driven Water Meter (Domestic Type) IS : 779/94, these type of meters are known for theirdurabilityandlong lasting lifeso it is prefered by clients all over the world.

• Brass body and Coupling


• Plastic cap and lid.


• Sealed against tampering


• Leakproff totally dry


• Totalliser can be oriented around 360 for easy reading

Jameel Trading Company ia one of theauthorizeddealer ofBulk Helical Enclosed Type (Mechanical Driven) IS 2373-1981in Chennai. Its popular among clients because of itslong lasting lifePerformanceand coustomers trust on our products.

• Brass body and Coupling


• Plastic cap and lid.


• Sealed against tampering


• Leakproff totally dry


• Totalliser can be oriented around 360 for easy reading

Jameel Trading Company provides wide range ofCast Steel Sleeve Packed Water Level Gauge Flanged, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• Body: CS


• Spindle, Plunge, Cover: SS 410


• Ball: SS 304


• Gasket: NASB


• Fastmers: MS

Jameel Trading Company provides wide range ofDrum Valve(Basic Valve), these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• Body: C.I. / Ductile Iron / Bronze / Stainless Steel


• Seat: Buna - N (Water) / PTFE / Viton (Steam)


• Diaphragm: Buna - N (Water) / PTFE / Viton (Steam)


• O - Ring: Buna - N / Viton


• Spring: S.Steel


• Adjusting Stem: Stainless Steel


• Media: Flanged Ends


• Ends: Air, Water, Oil, Gas, Chemical & Steam

Jameel Trading Company provides wide range ofBALL HOSE BIBCOCK, these ITAP Valves are most commonly used in pressurized lines, gas or liquid. They are Popular amoung the clients all around the world.

• Heavy model.


• Body in nickel-plated brass.


• Hose connection in brass.


• Lever handle in steel.


• Minimum and maximum working temperature: -20C, 80C.


• Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).