Jameel Trading Company provides wide range ofBall Float Type, these stream traps are connected with a lever to the valve and seat. Condensate will be discharged once it reaches a certain level inside the trap. Condensate is discharged continuously. Ball float steam traps belong to the family of mechanical traps. They operate on the difference in density between steam and water

• Low cost of ownership : Stainless stell base for longer life, low maintenance and minimal system downtime.
• No live steam loss : Achieved by self aligning valve and water seal.
• Erosion resistant : Improved design with simplified flow paths to reduce erosion.
• Effective condensate drainage : Modulating valve orifice mechanism that provides complete and immediate condensate removal under all positive pressure load conditions.
• Quick start-up : Integral air vent for maximum venting ofair to improve productivity.
• High Quality Product : Improved materials and surface finish offer a high quality product.
• Impact resistance : Strong float construction guaranteed against waterhammer.

Jameel Trading Company provides wide range ofReflux Valve, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• Low cost of ownership : Stainless stell base for longer life, low maintenance and minimal system downtime.
• No live steam loss : Achieved by self aligning valve and water seal.
• Erosion resistant : Improved design with simplified flow paths to reduce erosion.
• Effective condensate drainage : Modulating valve orifice mechanism that provides complete and immediate condensate removal under all positive pressure load conditions.
• High Quality Product : Improved materials and surface finish offer a high quality product.
• Impact resistance : Strong float construction guaranteed against waterhammer.

Jameel Trading Company provides variety ofTeflon lined Ball valves, these type of valves are known for theirdurabilityandlong lasting lifeso it is prefered by clients all over the world.

• Durablity
• Corrosion Free
• Withstand Hign Pressure

Jameel Trading Company provides wide range ofDiaphragm Operated Type Solenoid Valves, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

Jameel Trading Company provides wide range ofSilent safety Valves, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• Body: CF8 / CF8M / CF3M
• Sprig Cover: CF8
• Plug: CF8 / CF8M / CF3M
• Sealing Spacer: NBR
• Plug Bolt: S.S.304
• Diaphragm: NBR/Viton
• V-Seal: NBR/Viton
• Washer: Brass
• Spring: Spring Steel
• Adjusting Stem: S.S.304

Jameel Trading Company provides variety ofOrdinary Lift safety Valve, these type of valves are known for theirdurabilityandlong lasting lifeso it is prefered by clients all over the world.

• Manufacturing Std: Generally conforming to API 526
• Seal Leakage Test: API 527
• End Connections: Flanges as per DIN 2545 (PN 40)/BS 10 Table-H
• Max. Set Pressure: 32Kg/Cm2 (460 PSIG) at 260C

Jameel Trading Company provides wide range ofBall Valve - Flange / Socket, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• CONSTRUCTION :3 piece design, Single piece stem (Spindle) Reinforced Ball, Teflon seated, full bore.
• DESIGN AND MANUFACTURING STD.:As per Manufacturer's Standard
• END CONNECTIONS :Flanged as per ANSI B 16.5 (150 #) & as per BS 10 (Table D/E/F) & DIN STD, Screw Ends (BSP thread )

Jameel Trading Company provides wide range ofFloat Tube Valve - Flange / Socket, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• CONSTRUCTION :Ball type, Soft seated
• DESIGN AND MANUFACTURING STD.: As per Manufacturer's Standard
• END CONNECTIONS:Flanged as per ANSI B 16.5 (150 #)as per BS 10 (Table DIE/F) & DIN STD.

Jameel Trading Company provides wide range ofRUBBER LINED DIAPHRAGM VALVE, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• Manufacturing std: BS 5156
• Face to Face: BS 5156/ANSI B 16.10
• End connection: Flanged Ends to BS 10 Table-D
• Inspection and Testing std: BS 6755(part-1)

Jameel Trading Company provides wide range ofCast Steel Parallel Slide Blow Down ValveFlanged Table-J, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• Body: CS
• Rack & Pinion: SS 410/SS 304
• Gasket: NAS8
• Gland Packing: GR
• Operating Key & Features: MS

Jameel Trading Company provides wide range ofBronze Safety Relief Valve, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• Body: Bronze
• Spindle, Check nuts & screws: FB
• Spring: SPS
• Easing Lever: CI

Jameel Trading Company provides wide range ofBronze Pop-Type Safety Valve, Screwed/Flanged, these type of valves are prefered by clients for itsdurabilityandlong lasting life.

• Body: Bronze
• Spindle, Check nuts & screws: FB
• Spring: SPS
• Cap: ALC
• Easing Lever: CI

Jameel Trading Company provides variety ofFloat Valve, these type of valves are known for theirdurabilityandlong lasting lifeso it is prefered by clients all over the world.

• The working pressure should be greater than 0.3 kgf/cm2 and gate fully open with 1.5 kgf/cm2, please check the pressure before installation.
• Please remove impurities or metal dusts inside the pipe throughly.
• If possible, please add filter to prevent pipe blocking.
• Vertical and horizontal installation is acceptable. Avoid upside-down installation under insufficient flow.
• Please uses high pressure
• float ball switch

Jameel Trading Company provides variety ofPneumatic Operated Drum Valve, these type of valves are known for theirdurabilityandlong lasting lifeso it is prefered by clients all over the world.

• Exclusive smart design for Big size & cross country Water line Projects.
• High Cv Value, with Low Pressure Hammering
• Choice of operating Control available in Pneumatic Actuator like On Off / Modulating / On-Off with Feedback
• On-Off & Proportionate (Modulating) control having Input Single of 420mA available in Pneumatic Actuator
• Precise Pressure control and repeatability can be achieved for Proportionate Control Application.

Jameel Trading Company provides variety ofElectric Operated Drum Valve, these type of valves are known for theirdurabilityandlong lasting lifeso it is prefered by clients all over the world.

• Exclusive smart design having motorized function used for Bigger sizes Municipal water Supply Boards & cross country Pipe line Projects.
• High Cv Value, with Low Pressure Hammering via smooth operation in Actuator
• Choice of operating Control available in Electrical Actuator like On Off / Modulating / On-Off with Feedback
• On-Off & Proportionate (Modulating) control having Input Single of 420mA available in Electrical Actuator
• Precise Pressure control and repeatability can be achieved for Motorized Proportional Control Application.
• Low Noise & Friction at the time of Controlling.
• Vertical & Horizontal installation can be done

Jameel Trading Company provides variety ofDirect Pressure Reducing Valve Cast Iron / Flange Type, these type of valves are known for theirdurabilityandlong lasting lifeso it is prefered by clients all over the world.

Jameel Trading Company provides variety ofM.S. S.S. Fabricated Double Beat Valve, these type of valves are known for theirdurabilityandlong lasting lifeso it is prefered by clients all over the world.

• Heavy duty m.s. /s.s body as per requirement
• Inbuilt valves save cost & space
• S.S.304 internal parts to resist corrosive fluids.
• S.S.410 spindle dually grinded & polished for longer gland life.
• Replaceable rubber seat, suitable upto 180 & 100% leak proof.

Jameel Trading Company provides variety ofMotorised Right Angle Valve, these type of valves are known for theirdurabilityandlong lasting lifeso it is prefered by clients all over the world.

• Heavy duty body with s.s. 410 seat & EPDM rubber seat.
• Actuator of reputed make duty fitted & calibrated.
• Suitable for On/Off duty compatible with DCS/PLC
• Suitable for regulations duty compatible with DCS/PLC

Jameel Trading Company provides variety ofC.I. Rubber Seated Right Angle Valve, these type of valves are known for theirdurabilityandlong lasting lifeso it is prefered by clients all over the world.

• Heavy duty body for long life.
• Replaceable rubber seat, suitable upto 180 & 100% leak proof
• S.S.410 spindle dually grinded & polished for longer grand life.
• Light weight , easy to install, all internal S.S. 304

Jameel Trading Company provides wide range ofIDEAL BALL VALVE, these ITAP Valves are most commonly used in pressurized lines, gas or liquid. They are Popular amoung the clients all around the world.

• Suitable for domestic water services.
• Heating and air-conditioning plants.
• Compressed air systems.
• Female/female threads.
• Body in nickel-plated brass.
• Minimum and maximum working temperatures: -20C, 150C.
• Threads: ISO228.

Jameel Trading Company provides wide range ofVIENNA BALL VALVE, these ITAP Valves are most commonly used in pressurized lines, gas or liquid. They are Popular amoung the clients all around the world.

• Suitable for domestic water services.
• Heating and air-conditioning plants.
• Compressed air systems.
• Female/female threads.
• Lever handle in steel.
• Body in nickel-plated brass.
• Minimum and maximum working temperatures: -20C, 150C in absence of steam.
• Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228)

Jameel Trading Company provides wide range of3-BALL BALL VALVE, these ITAP Valves are most commonly used in pressurized lines, gas or liquid. They are Popular amoung the clients all around the world.

• Suitable for domestic water services.
• Heating and air-conditioning plants.
• Compressed air systems.
• Female/female threads.
Lever handle in aluminium
• Body in nickel-plated brass.
• Minimum and maximum working temperatures: -20C, 150C in absence of steam.
• Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
• Available also with a T ot L-drilled ball

Jameel Trading Company provides wide range ofLONDON BALL VALVE, these ITAP Valves are most commonly used in pressurized lines, gas or liquid. They are Popular amoung the clients all around the world.

Technical Spec.

• Female/female threads.
• Lever handle in steel.
• Body in nickel-plated brass.
• Minimum and maximum working temperatures: -20C, 60C.
• EN 331 APPROVED.
• Threads: ISO 7/1 Rp parallel (equivalent to DIN EN 10226-1 and BS EN 10226-1).