Jamshedpur, Jharkhand, India
Our Products
Universal joint shafts from a driving machine to a driven machine and can accommodate a high degree of misalignment. Reliability and efficiency is our top priority.
Our product portfolio includes:
Voith universal joint shafts ensure productivity and reduce maintenance costs. The torque capacity extends beyond 20, 000 kNm (14 million lbf ft).
PBL P Series Helical gearbox and electric motor are built as one unit to give coaxial and compact constructions. Helical Gear Reducers have co-axial input and output shaft that can be driven by any prime mover. Gearboxes can be supplied with input shaft for connecting to prime mover. Motor Mount Gearboxes ensures easy fitment of any make of motors with B5 mounting as per IEC frame. These are available in 2 & 3 reductions and in 4, 5, & 6 reductions for extremely low output speeds. These are available in foot, flange, foot-cum-flange and agitator type constructihon
The WINNER range has been designed to enable advanced control over a wide variety of applications. Itsdesign allows the highest amount of features a radio remote control can have. The transmitter, with 10 double speed pushbuttons has 5 status leads, which display either the system status or special functions.
Its design allows the possibility to incorporate the latest technological advances such as the infrared system (IR) or the Intelligent Changing Frequency Management (GCFI). The manufacturing process includes using new durable materials which provides the equipment with a greater resistance either to weather conditions or to possible impacts.
The TUNNER range of Radio Remote Controls incorporates within its compact size all the functions of abasic radio remote control. The compact yet rugged transmitter has 7 double speed pushbuttons and an emergency stop. It has been designed to suite most industrial applications. As a standard, its design incorporates the advanced feature of Intelligent Changing Frequency Management (GCFI). The manufacturing process includes using new durable materials which provides the equipment with a greater resistance to either harsh weather conditions or possible impacts.
Thruster brake is a device to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a pre-stressed compression spring. The shoes press on the rotating brake drum retarding its speed, and finally stopping it. The releasing of the brake and compressing of the spring is done by thruster.
Safe Lift Pendant Push Buttons are ideally used for small hoist applications, for control circuit in both single and double row versions, for control and direct switching power circuits & for tail lift controls.
Available in both single & double speed versions and also in vertical (single row) and horizontal (double row) types. Speed-O-Controls is manufacturing more than 25 different versions of Pendant Push Button Stations.Basic feature include:
Rotary Geared Limit Switch GRLS is used to trip motor supply when the moving load reaches the extreme end positions of working zone. The driving motion is transmitted by worm gear through worm shaft. The rotations and movements are transmitted to switches by adjustable cams.
Worm Drive Limit Switch FGLS are suitable for use on reversing drives, such as Hoists, Cranes, Winches, Rolling Mills, Theater Curtains, Coke Oven etc. The driving motion is transmitted by worm gear. All gears and hubs are made of low wear thermoplastic material. The rotational movements are transmitted to switches by adjustable cams.
Limit Switch LSR Cross Rotary for travel Motion Operates the control change over the contacts of a motor of a moving equipment which when operates with a load a actuates the 300mm rods of the Limit Switch and this in turn operates the NO/NC change-over contact elements.
Operates the control change-over the contacts of a motor of a moving equipment when a cam moving with loads actuates the lever / (or the weight rests on a surface) of the Limit Switch. This turns the cam on a square shaft and operates the NO / NC change over the contact elements.
Grab Differential Limit Switch
It is used for stopping the closing motor after closing or opening, regardless of the height of the grab and starting the holding motor after closing, for the transition to the hoisting action as well as for stopping the holding and closing motors at hoisting and lowest grab position.
Master Controller is housed in an enclosure and provided with an easily removable cover with ample area for maintenance. The cam shaft is mounted on bearing bushes on the walls of the housing.
They are made of delrin material and fixed on square spindle switch which are moved by a handle. The cams are cut according to the switching program.
Dual Master Controller with one universal handle allows a crane operator to control both bridge and trolley motions with one handle. Simultaneous operations of bridge and trolley motions are provided for greater sporting accuracy and faster movement of loads.
Esenpro make geared motors are composite unit, compact, sturdy and totally enclosed.
The nominal output shaft speeds are according to R 20 series of preferred numbers. Geared Motors can be offered for fixed output speeds from 18 to 355 RPM with 4 pole electric motor. The motor capacity ranges from 0.18 KW to 110 KW. Geared Motors less than output speeds of 18 RPM are offered with combination Geared Motor units.
EA and EP Series gear units are specifically designed for Aerator and Agitator applications. The helical gears are designed and manufactured such that most favorable balance is achieved between strength, surface durability ratings, noise level and efficiency. To attain maximum power capacity, low noise and high efficiency the gears are carburized, hardened, tempered and subsequently flank ground to DIN Class 6/7.Salient Features:
Used in still mill applications. The gear unit consists of one input shafts and two output shafts havingdifferent ratios for both the output shafts
Tech Specification
Helical Gear Unit with one input shaft and 13 output shafts which are specifically used in SteelIndustries.
Tech Specification
Uncoiler and Recoiler are special gear units used in Steel Industries. They are foot mounted, multiple stage helical gear units with a special output shaft.
Tech Specification
Cement IndustriesMining and QuarryingWagon TipplersBulk MaterialsPorts and ShippingCoal HandlingPower PlantsConcrete and AggregateConstruction/TunnelingDemolitionLandfillsRecycling ScrapSteel and SlagWast TransferWood Processing
When it comes to oil skimming solutions, the Oil Skimmers Model 6V Brill oil skimming system is the dependable, cost-effective and uncomplicated solution for removing oily waste from water during the manufacturing and waste treatment process.
The Oil Skimmers Model 6V waste oil recovery system removes animal, vegetable and petroleum-based oils, fats, greases, and oily wastes that float on the surface of water or other liquids. The unit removes as much as 100 gallons of waste oil per hour, and discharges it into a drum so efficiently that the recovered waste oil is virtually water-free.
Features and Benefits
How the Model 6V Works
At its simplest, the Oil Skimmers Model 6V Brill waste oil recovery system separates oil and water using a specially formulated collector tube:
To see the Model 6V in action, visit our Oil Skimmers video page. In addition, you can view the Model 6V spec sheet, or get more information about a specific application such as, military vehicle wash racks.
The Expertly Crafted, Customizable Oil Separation Solution
Engineered for headache-free operation, the external parts of the Oil Skimmers Model 6V Brill unit the drive wheel, scrapers, and pressure blocks are made of high abrasion-resistant ceramic. Gearing is engineered to require minimal power and maintenance, and sealed in a cast housing to protect them from conditions found in and around a skimming environment.
Its thoughtful design and durable construction ensure the Model 6V Brill system an operational life span of 25 to 30 years. Many units have been in service for more than 30 years and are still going strong.
The Oil Skimmers Model 6V Brill unit waste oil recovery system has been designed to operate continually and unattended as it separates animal, vegetable, and petroleum-based oils, fats, and greases floating on the surface of water.
Mounting equipment options increase its versatility, plus prefabricated mounting packages further extend the Model 6V systems flexibility. These packages simplify placement of the system on pits, sumps, ponds, and open or closed tanks, thus eliminating costly operation.
With experience in over 25, 000 applications, our experienced representatives are available to survey your oil removal needs and design a system to meet even the most challenging waste oil removal problem.
Model 6V Typical Applications
Model 6V oil skimmers are at work in thousands of applications worldwide. A sampling includes:
No matter what your application needs, Oil Skimmers Inc. has a system that will manage all your waste oil recovery efforts.
Esenpro make 'EP' Series Standard Helical, Parallel Shaft and Standard Bevel Helical, Right Angle Shaft, Hardened and Flank ground gear units. EP Series are designed and made on the basis of most advanced scientific computer aided design and study of gear tooth geometry and shaft deflection.
Housings are made of closed grain cast iron whereas for larger sizes stress relieved and shot blasted M.S Fabricated housings are used.
For maximum gear efficiency they are carburized, hardened, tempered and subsequently flank ground an accuracy of DIN Class 5/6.
Additional cooling devices like fan cooling, cooling coil, and external heat exchanger are provided as per thermal power limitation.
Taper Lock Bush is the changeable part in Taper Lock Pulley. Over a period of time shaft damages center part of Pulley and whole pulley needs to be replaced.but using taper lock bush pulley can be reused. It also reutilises the taper lock pulley by just simply changing taper bush of the pulley and saving the cost of entire pulley.
The honey comb Chain/Belt are constructed from cross rods and a flat metal strip. At the sides of the belt the cross rods have a welded ring (welded edges). The honey comb Chain/Belt is positively driven by sprockets, and can be used in conveyors. It is used in Ovens, washing, cooling, drying, sorting, & bread production systems.
Large Pitch Conveyor Chain are designed to carry heavy loads and endure rough loading. Large pitch conveyor chain is designed to operate in harsh conditions. The chain is designed with relatively large clearances between components. Attachments are high in strength to carry load between large spaces.
Hollow bearing pin chain facilitates fixing attachments to outer links by bolting through the hollow pin and is suitable for use in all normal conditions. It is ideal for setups where spacing of crossrods or pins must be changed frequently. It also conserves weight compared to roller chain.
Special Mill Drive Gear units cum Pinion Stand. Used in Cold roll Mills. The Gear unit consists of asingle input shaft with two vertically offset output shafts.
Tech Specification
SCREW SERIES couplings are suitable for all those heavy duty applications characterized by pressure andflow peaks and possibility of connection and disconnection under residual pressure. Threaded connection ensures a wider contact surface in the mating area with consequent higher resistance to pressure peaks, hoses bending and vibrations .
Applications
CHECK VALVES are often used as safety device within hydraulic circuits. Purposely designed to be usedwhen it is necessary for opening a valve at a specific pressure level, check valves are characterized by elastomeric or metal to metal sealing and by a wide range of opening pressures.
Applications
