Wall Putty for use on concrete / motar (internal / external) and ceiling. It's filled the pores of concrete/mortar wall/ceiling and provide white smooth and dry surface. Wall Putty has more adhesive strength. Durability and enhance the life of paints.   Features Wall Putty not required any curing. Applied on both interior/exterior surface. It prevent from algae and fungi on wall. Any kind of paint/distemper can be applied on it. It a cementations material it has better adhesiveness and durability. No need to apply any kind of primer before application of paint/distemper.   Application   Wall Putty with 30-35% clean water slowly to make a paste. Continue the mixing for 10-15 minute till a uniform paste is formed. Always prepare a required quantity of putty and use with in 2-3 hrs. of mixing of with water. Apply the first coat on already moistened wall surface from bottom to upward direction uniformly with help of putty blade. Leave the surface to dry for at last 3 hour and then apply second coat of putty. After drying the first coat of putty just rub the surface gently with wet sponge with a putty blade in order to remove loose particles. Leave the surface to dry preferably for over might. Total thickness of the coat should be limited to maximum 1.5 mm. Gently level the wall/ceiling surface with very fine water proof emery paper of not less than 500 number to get a glossy white surface.

Gypsum is a by-product available from Phosphoric Acid Plant and used in production of Ammonium Sulphate. GSFC has been first in the country to develop and implement successfully Phospho-Gypsum process for manufacture of Ammonium Sulphate.   This product is available in a fine mesh powder form Phosphoric Acid Plant mainly used in Agriculture as soil amendment. Gypsum is a sedimentary mineral. It is found in layers that were formed under salt water millions of years ago. The water evaporated and left the mineral. Gypsum is composed of calcium sulfate (CaSO4) and water (H2O), i.e. Calcium Sulphate Dihydrate (CaSO4.2H2O). In Europe, the principal Gypsum quarries are located in Germany, UK, France, Spain, Italy, Poland, Russia and the Ukraine. The main chemical substitute to natural Gypsum is FGD Gypsum(Flue Gas Desulphurisation Gypsum). It is generated by coal-fired power plants. FGD Gypsum is the end product of a wet purification procedure with natural lime that is generated according to the same laws as natural Gypsum but in a speeded-up process taking only a few hours. Gypsum is also an indefinitely recyclable raw material. You can always reuse Gypsum because the chemical composition of the raw material in the products remains unchanged. Gypsum products can furthermore be counted amongst the very few construction materials where closed-loop recycling is possible, i.e. where the waste is used to make the same product agan

White Cement has long been a product shrouded in mystery and myths about its applications and uses.Very often people have the notion that since it is a "Cement" product,   White Cement has long been a product shrouded in mystery and myths about its applications and uses. Very often people have the notion that since it is a "Cement" product, it must be used purely for construction and repair purposes. Not only is J.K. White Cement the most popular and time tested choice for your floors and walls but also its lesser known applications have unimaginable scope. It is suitable for numerous decorative & architectural applications in white, light & dark colours. You can put your personal touch on almost any part of your house, be it interiors or exteriors, using J.K. White Cement as your magic tool. So go on and be amazed… Envisioning your dream home has never been so easy!   Features of White Cement   white cement features high white content and high strength, and wide application, with a certified quality. white cement can meet the requirements of the customers for colors and patterns, and has high durability. White Cement is a specially-ground white cement only for exterior wall facing, optimal in construction performance, consistent in fineness and strength.

We offer pure and flawlessly white Platinum plaster of paris (POP). The whiteness of this plaster of paris (POP) stays for years together thus proving the fact that it's purity is not momentary but a long lasting one.   Jaquar Plaster Pvt. Ltd. is a superior quality plaster of paris (POP) as its manufacturing process includes many strong scientific tests. The major test is the calcium cooking process wherein each droplet of pure calcium sulphate is boiled at a predetermined temperature and the silica is separated. The result of this procedure is that Platinum doesn't shrink or crack after drying thus our plaster of plaster is very user friendly and doesn't create much problems for the user.   Features of POP   Platinum plaster of paris (POP) is so finely ground that it is a low density powder thus it covers more area with less material. It is also available in good quantity at affordable prices. We offer light colored, high strength and extra fine plaster of paris (POP) which has BIS marked standards. This plaster of paris (POP) settles slowly thus gives enough time to the mason/worker to complete his work, another advantage is that after settling the plaster of paris (POP) becomes strong thus it increases it's longevity.   Application   Platinum plaster of paris (POP) is produced with isothermic micronic process and at predetermined temperature and controlled moisture. This high quality plaster of paris (POP) is packed in the right quantity with secured packing measures. Thus Platinum plaster of paris (POP) is available in the exact required packs in the market and there is no compromise in the quality.

• FeatureWall Putty not required any curing. Applied on both interior/exterior surface. It prevent from algae and fungi on wall.

Wall Putty for use on concrete motar (internal external) and ceiling. It's filled the pores of concretemortar wallceiling and provide white smooth and dry surface. Wall Putty has more adhesive strength. Durability and enhance the life of paints.

Wall Putty for use on concrete / motar (internal / external) and ceiling. It's filled the pores of concrete/mortar wall/ceiling and provide white smooth and dry surface. Wall Putty has more adhesive strength. Durability and enhance the life of paints.   Features Wall Putty not required any curing. Applied on both interior/exterior surface. It prevent from algae and fungi on wall. Any kind of paint/distemper can be applied on it. It a cementations material it has better adhesiveness and durability. No need to apply any kind of primer before application of paint/distemper.   Application   Wall Putty with 30-35% clean water slowly to make a paste. Continue the mixing for 10-15 minute till a uniform paste is formed. Always prepare a required quantity of putty and use with in 2-3 hrs. of mixing of with water. Apply the first coat on already moistened wall surface from bottom to upward direction uniformly with help of putty blade. Leave the surface to dry for at last 3 hour and then apply second coat of putty. After drying the first coat of putty just rub the surface gently with wet sponge with a putty blade in order to remove loose particles. Leave the surface to dry preferably for over might. Total thickness of the coat should be limited to maximum 1.5 mm. Gently level the wall/ceiling surface with very fine water proof emery paper of not less than 500 number to get a glossy white surface.

Gypsum is a by-product available from Phosphoric Acid Plant and used in production of Ammonium Sulphate. GSFC has been first in the country to develop and implement successfully Phospho-Gypsum process for manufacture of Ammonium Sulphate.   This product is available in a fine mesh powder form Phosphoric Acid Plant mainly used in Agriculture as soil amendment. Gypsum is a sedimentary mineral. It is found in layers that were formed under salt water millions of years ago. The water evaporated and left the mineral. Gypsum is composed of calcium sulfate (CaSO4) and water (H2O), i.e. Calcium Sulphate Dihydrate (CaSO4.2H2O). In Europe, the principal Gypsum quarries are located in Germany, UK, France, Spain, Italy, Poland, Russia and the Ukraine. The main chemical substitute to natural Gypsum is FGD Gypsum(Flue Gas Desulphurisation Gypsum). It is generated by coal-fired power plants. FGD Gypsum is the end product of a wet purification procedure with natural lime that is generated according to the same laws as natural Gypsum but in a speeded-up process taking only a few hours. Gypsum is also an indefinitely recyclable raw material. You can always reuse Gypsum because the chemical composition of the raw material in the products remains unchanged. Gypsum products can furthermore be counted amongst the very few construction materials where closed-loop recycling is possible, i.e. where the waste is used to make the same product agan

White Cement has long been a product shrouded in mystery and myths about its applications and uses.Very often people have the notion that since it is a "Cement" product,   White Cement has long been a product shrouded in mystery and myths about its applications and uses. Very often people have the notion that since it is a "Cement" product, it must be used purely for construction and repair purposes. Not only is J.K. White Cement the most popular and time tested choice for your floors and walls but also its lesser known applications have unimaginable scope. It is suitable for numerous decorative & architectural applications in white, light & dark colours. You can put your personal touch on almost any part of your house, be it interiors or exteriors, using J.K. White Cement as your magic tool. So go on and be amazed… Envisioning your dream home has never been so easy!   Features of White Cement   white cement features high white content and high strength, and wide application, with a certified quality. white cement can meet the requirements of the customers for colors and patterns, and has high durability. White Cement is a specially-ground white cement only for exterior wall facing, optimal in construction performance, consistent in fineness and strength.

We offer pure and flawlessly white Platinum plaster of paris (POP). The whiteness of this plaster of paris (POP) stays for years together thus proving the fact that it's purity is not momentary but a long lasting one.   Jaquar Plaster Pvt. Ltd. is a superior quality plaster of paris (POP) as its manufacturing process includes many strong scientific tests. The major test is the calcium cooking process wherein each droplet of pure calcium sulphate is boiled at a predetermined temperature and the silica is separated. The result of this procedure is that Platinum doesn't shrink or crack after drying thus our plaster of plaster is very user friendly and doesn't create much problems for the user.   Features of POP   Platinum plaster of paris (POP) is so finely ground that it is a low density powder thus it covers more area with less material. It is also available in good quantity at affordable prices. We offer light colored, high strength and extra fine plaster of paris (POP) which has BIS marked standards. This plaster of paris (POP) settles slowly thus gives enough time to the mason/worker to complete his work, another advantage is that after settling the plaster of paris (POP) becomes strong thus it increases it's longevity.   Application   Platinum plaster of paris (POP) is produced with isothermic micronic process and at predetermined temperature and controlled moisture. This high quality plaster of paris (POP) is packed in the right quantity with secured packing measures. Thus Platinum plaster of paris (POP) is available in the exact required packs in the market and there is no compromise in the quality.

• FeatureWall Putty not required any curing. Applied on both interior/exterior surface. It prevent from algae and fungi on wall.

Wall Putty for use on concrete motar (internal external) and ceiling. It's filled the pores of concretemortar wallceiling and provide white smooth and dry surface. Wall Putty has more adhesive strength. Durability and enhance the life of paints.