Our Products

Flanges 9 Products available
Metal & Metal Products 6 Products available
Fasteners 3 Products available
Pipe Tees 2 Products available
- Pipe Flange Fittings
- Stainless Steel Pipe Fitting
Steel Pipes 2 Products available
- Carbon Steel Pipes
- ERW Steel Pipes And Tubes
Metal Pipes & Tubes 2 Products available
- Cupro Nickel Pipes
- Inconel Pipes And Tubes
Alloy Pipes 2 Products available
- Hastelloy Pipes And Tubes
- Monel Pipes And Tubes
Steel Coils 2 Products available
- Hr Coils
- CR Coils
Nuts Bolts And Fasteners 2 Products available
- Hexagon Nut
- Stainless Steel Studs
Instrumentation & Control Equipment 1 Products available
- Bus Bar
Roofing Sheets 1 Products available
- Embossed Sheet
Forged Pipe Fittings 1 Products available
- Forged Fittings
Stainless Steel Pipes 1 Products available
- Pipe And Tubes
Coupling 1 Products available
- Coupling
Pipe Caps 1 Products available
- End Cap
Seamless Pipes 1 Products available
- Seamless Pipes
Steel Plates, Sheets, Bars & Rods 1 Products available
- Square Bars
Steel Pipes & Tubes 1 Products available
- Duplex Pipe
Stainless Steel Sheet 1 Products available
- Stainless Steel Sheets
Steel Plates 1 Products available
- Mild Steel Plates
Bolts 1 Products available
- Bolts
Washers 1 Products available
- Washer
Screws 1 Products available
- Screw
Others Products 2 Products available
- Plates and Coils
- Structural Plates

Flanges

We offer a complete product range of Threaded Flanges, Carbon Steel Flanges, Screwed Flanges, Duplex Stainless Steel Flanges and Socket Weld Flanges

Threaded Flanges

Threaded flanges are widely demanded as pipe flanges i.e called as threaded pipe flanges used in different industrial applications. They are the special type of pipe flanges which can be attached to the pipe without welding. Threaded flanges are threaded in the bore which match an external thread on the pipe. These threads are tapered in order to create a seal between the threaded flange and the pipe as the tapers approach the same diameter.

We supply a quality range of Threaded Flanges to our valuable clients at competitive market prices. These flanges, acknowledged for their accurate and smooth performance, are extensively used in industries like petrochemical, chemical, petroleum, etc. Our instruments, manufactured using superior quality raw materials, are preferred for their better operational life and high tensile strength.

STANDARD :	ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605
GRADES :	Stainless Steel Threaded Flanges :ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L Alloy Steel Threaded Flanges :ASTM A182 F1, F5, F9, F11, F22, F91 304, 304L, 304H, 316, 316L, 316H, 316Ti, 321, 317, 317L, 347, 347H, 904L, Duplex stainless steel 2205, Super duplex stainless steel 2507 and others.
SIZE :	1/8" NB to 48" NB
TYPE :	Carbon Steel Flanges Alloy Steel Flanges Nickel Alloy Flanges Copper Alloy Flanges
FEATURES :	Reliable Precisely Designed High Strength
APPLICATIONS :	Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded. Highly Explosive Areas High Pressure Applications

View Complete Details

Ask Latest Price & Details

Carbon Steel Flanges

We offer our carbon steel flanges in various materials such as carbon steel and stainless including 304, 304L, 316, 316L and 301. These carbon steel flanges are available in all standards also. Our carbon steel flanges are acclaimed for application specific design and accurate dimension

We are supplier of Carbon Steel Flanges. We bring forth for our customers precisely engineered array of flanges that lies in tune with the accepted standards of the industry. Our flanges are widely used due to their features such as durability, precise construction, flawless finish, high tensile strength and performance. These flanges are available at industry's leading rates which is another important feature exhibited by our products range. Fabricated using premium quality raw material, our range of carbon steel flanges are meticulously designed with utmost attention to quality. Highly acknowledged for their durability and reliability, these flanges are offered to our clients

STANDARD :	ASTM / ASME A/SA 105 / 350 LF 2 , ASTM / ASME A/SA 182. ASTM A 105, ASTM A 694-F42, F46, F52, F60, F65 & F70.
GRADES :	Carbon Steel: ASTM / ASME A 105., ASTM / ASME A 350 LF 2.
SIZE :	1/8" NB to 48" NB
FEATURES :	Corrosion resistance Durable Precision design
APPLICATIONS :	Commercial And Industrial Applications

View Complete Details

Ask Latest Price & Details

Screwed Flanges

We are one of the leading manufacturer of screwed flanges in India, we can supply stainless steel, carbon steel and nickel alloy screwed pipe flanges, the method includes forging and casting. Also, we can produce as per your drawings and specifications.

Our organization provides an advanced range of Screwed Flanges to our clients, which is fabricated under the guidance of our experts who has a vast knowledge in this stream. These are provided at competitive prices as per international standard. Our products are available in different dimensions, sizes and specifications as per the nature of applications. We source a vast range of Screwed Flanges. For our clients from most reputed vendors who are known for their high quality standards. These are obtainable in stainless steel, carbon steel and nickel alloy flanges by using forging and casting methods. Offered in variety specifications this range can also be customized for our clients.

STANDARD :	Stainless Steel : ASTM A 182, A 240
GRADES :	Stainless Steel :F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
SIZE :	1/8" NB to 48" NB
FEATURES :	Corrosion Resistance Precisely Designed Durable
APPLICATIONS :	Industrial Applications

View Complete Details

Ask Latest Price & Details

Duplex Stainless Steel Flanges

We are supplying stainless steel and Duplex Stainless Steel Flanges. In order to ensure quality, we follow international standards of quality and safety to manufacture these flanges. Use of qualitative material provides them spectacular durability and excellent strength. Our collection of flanges is resistant to corrosion and are available in different dimensions and configurations to suit the need of our esteemed clients.

We are instrumental in offering our clients, a resilient range of duplex steel flanges that is designed in accordance with the standards prescribed by the industry. Used for connecting two pipes in processing industries, these flanges are offered to our clients in standard and customized specifications. We offer wide variety of stainless steel flanges and duplex steel flanges as per the standard specifications. These steel flanges are highly durable, reliable, corrosion resistant and are available at highly competitive prices.

STANDARD :	Stainless Steel Flanges : ASTM / ASME A/SA 182 & A240 Duplex Steel Flanges : ASTM / ASME A/SA 182
GRADES :	Stainless Steel Flanges : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. Duplex Steel Flanges : F 44, F 45, F51, F 53, F 55, F 60, F 61.
RANGE :	½" NB to 36" NB
TYPE :	Weld Neck Flanges – WNRF Socket Weld Flanges - SWRF Slip On Raise Face - SORF Blind Raise Face – BLRF
FEATURES :	Corrosion resistance Durable Precision design
APPLICATIONS :	Industrial Applications

View Complete Details

Ask Latest Price & Details

Socket Weld Flanges

STANDARD : ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE
GRADES : SS 304 / SS 316 / SS 317 / SS 347 / SS 304L / SS 316
SIZE : ½" to 4"

Socket welding flange, a popular type of pipe flange, was initially developed for use on small-sized high- pressure piping. The fabrication of this type of flange is similar to that of a slip-on flange. However, the internal pocket of a socket weld flange allows for a smooth bore and better fluid flow. When provided with an internal weld, the static strength of this flange is equal to slip-on flange, but the fatigue strength is 50% greater than double welding slip-on flanges. Smooth bore conditions in such a flange can easily be attained without having to bevel the flange face and, after welding, to reface the socket weld flange as would be required with slip-on flanges. For this reason, the internally welded flange is popular in chemical process piping.

The Socket weld Flanges is similar to a slip-on flange, except that it has a bore and a counter bore. These act as a socket, holding the pipe in place before welding, hence the name. The counter bore is slightly larger than the OD of the matching pipe, allowing the pipe to be inserted into the flange, while the diameter of the smaller bore is the same as the ID of the matching pipe. This difference in bore size acts only as a restriction to the depth insertion of the pipe, and therefore eliminates any restriction in flow.

View Complete Details

Ask Latest Price & Details

Slip-on Flanges

Capitalizing on our in-depth industry knowledge, we are engaged in manufacturing, exporting and importing a wide range of Slip On Flanges. These are developed at par with the set industry standards, using quality tested raw material. In order to make sure that the end product is defect free, these are stringently tested using latest tools. We offer these flanges in various technical specifications at market leading rates.

Slip On Flanges are a popular type of pipe flanges. These are type of flanges that slide over the end of piping and then welded in place. These flanges are ideal for lower pressure applications. These are easily fitted and welded into different pipes. Welding reduces fabrication costs of these pipes. These are available in wide variety of sizes and applications. We provides Slip On Flanges (SORF) to our valuable clients which are made of high quality material. These are made under the supervision of our experts with advance technology. We offer these at reasonable rates as per standard norms. These are heat resistant, anti-corrosion and are highly demanded for its accuracy in performance and high tensile strength.

STANDARD :	ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
GRADES :	SS 304 / SS 316 / SS 317 / SS 347 / SS 304L / SS 316 / ASTM A 182, A 240
SIZE :	½" to 36"
FEATURES :	Durable Rust-free Offered in various dimensions
APPLICATIONS :	Industrial Applications

View Complete Details

Ask Latest Price & Details

Weldneck Flanges

This welding neck flanges is circumferential welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography. The bores of both pipe and flange match, which reduces turbulence and erosion inside the pipeline. The weld neck is therefore favored in critical applications. Weld Neck Flanges are a very common type of pipe flanges used in various industrial applications. They have a long tapered hub and are often used for high pressure applications.

Weld neck flanges are drilled (machined) with the wall thickness of the flange having the same dimensions of the matching pipe. The lighter the pipe is, the larger the bore, conversely, the heavier the pipe, the small the bore. Our range weld neck flanges, welding neck flanges are normally used for high-pressure, cold or hot temperature. We specialize these flanges in different dimensional and material specifications based upon the requirements of the clients. Highly resistant to corrosion and abrasion, our weld neck flanges, is available in different grades of material. In order to ensure quality, we follow international standards of quality and safety to manufacture these flanges. Use of qualitative material provides them spectacular durability and excellent strength. Our collection of flanges is resistant to corrosion and are available in different dimensions and configurations to suit the need of our esteemed clients.

STANDARD :	ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA
GRADES :	Stainless Steel : ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H, 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H. Duplex Steel : ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.
SIZE :	1/8" NB TO 48"NB.
FEATURES :	High strength Durable Dimensional accuracy
APPLICATIONS :	High Pressure Applications

View Complete Details

Ask Latest Price & Details

Reducing Flanges

We provide Reducing Flanges that are fabricated using quality stainless steel. These reducing flanges are available in different configuration to meet the requirement of varied industry applications. Our stainless steel reducing flanges range is mainly used to connect tubings and pipe sections.Reducing flanges offer various advantages such as close tolerances, reliability and durability. Moreover, the SS reducing flanges are supplied in customized specifications.

Our reducing flanges are designed in compliance with international quality standards. Available in all types and pressures, these flanges are widely used for pipe-to-pipe connections. The reducing flange includes a flange with one specified diameter having a bore of a different and smaller diameter. Except for the bore and hub dimensions, the reducing flange will have dimensions of the larger pipe size. To increase the size of the flange, these are used at the outlet side of the expansion joint. We are a prominent firm engaged in offering a wide range of Reducing Flanges to our clients. They are widely appreciated by our clients for their features like durability, compact size, rust free, superb performance and perfect finish. We offer these flanges that are tested for its quality and utility in various applications. These are accessible to our clients at competitive rates.

STANDARD :	ASTM / ASME SB 162/127/424 /168/443/574/462 UNS 10276 (Hastelloy C 276 Plate Flanges) UNS 2200 (Nickel 200 reducing flanges) UNS 2201 (Nickel 201 reducing flanges) UNS 4400 (Monel 400 reducing flanges)
GRADES :	Stainless Steel : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Duplex Steel : ASTM / ASME A/SA 182 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61
SIZE :	1/2"NB TO 60"NB IN
FEATURES :	Superior Strength Serviceability Dimensional accuracy
APPLICATIONS :	Industrial Applications

View Complete Details

Ask Latest Price & Details

Blind Flanges

Offering a wide range of high performance Blind Flanges, which Manufacture in supreme quality which is maintain by our Quality Control Department to ensure complete customer satisfaction. Featuring High Quality, High Durability Resistance to corrosion these flanges find usage in diverse industries. We offer these flanges in a variety of sizes, pressure and dimensions to cater to the demands of global clients.

We are a trusted business entities engaged in offering an extensive range of Blind Flanges. Manufactured in strict tandem with the international quality standards, these Flanges are durable and easy to install. Our range is used across various commercial and industries units for their longer service life. We deliver the orders in bulk quantity at client's premises within the stipulated time-frame. We are providing an extensive array Blind Flanges. Besides being fabricated using optimum-quality basic material, these products are tested thoroughly by our quality auditors against various quality parameters. Our provided products can be obtained in different sizes and specification at reasonable rates.

GRADES :	ASTM/ASME SA 182 F304, F304L, F316, F316L, F321, F347, SS 304 / SS 316 / SS 317 / SS 347 / SS 304L / SS 316L
SIZE :	1/2" to 56"
FEATURES :	Cost-effective Long lasting Precision design
APPLICATIONS :	Commercial And Industrial Applications