Write a Review
Our Products
Leading Manufacturer, Supplier & Retailer of Dosing Filling for Liquid Machine, Double Rotory Square Model, Peletizer Machine, Filling, Molding, Suppositories and Lipsticks Machine and V Blender Machine.
|
Advantages of this machine are accurate dosing, drip free filling, easy adjustment as a table machine. The Dosinig Filler fills and dispenses all liquids with two pumps and valves made from stainless stell. Both pumps work on one commun filling needle. Filling needles are made of stainless steel. The capacity of the machine is between 1000 and 2000 fills per hour.
The 'V' Blender is mainly used for mixing of dry power and its provides excellent results when mixing two different powers. This mixer provides a unique movement to the powers and thus mixes them very well.
The unit is equipped with a tilting and locking device, which is easy to operate. This permits adjustment of the infinitely variable setting of the pan angle, over its whole range. For the cleaning of the sides as well as the bottom of the pan an adjustable scraper is provided. Parts coming in to contact with the material to be processed are made of polished stainless steel.
The material to be processed is fed manually, or with a metering device, if a continues is required. The tilted palletizing pan, which rotates in a clockwise direction, is tilted to our motor drive.
The material is brought to practically the highest point of the pan and then rolls down in the even strim, to the lower half of the pan.
In accordance with the nature of the material the necessary quantity of liquid to from the pellets is added in certain places. The rolling movement and the addition of moisture causes pellet form. Due to the tilted pan and the movement of the material the larger pellets are carried to the top surface.
The size of the pellets can be influenced by the tilting angle of the pan by the amount of liquid added and the method, which it is introduced. As soon as the pan is full the pellets will continuously roll over the edge of the pan.
This apparatus is used for molding suppositories, Lipsticks and similar products. This equipment permits melting, agitation and mixing during the filling operation. Stainless steel kettle and agitator are heated by a glyeerin bath and 1000 watt heating element. Thermostat permits adjustment of temperature of kettle contents from 20 to 100 C by 1 graduation.
The sled, below the filler nozzle, holds any type of mould. It is adjustable in all directions and controlled by a hand wheel. Capacity of kettle is 3.5 lt. Heating jacket requires 2.75kg of glycerin. Production varies with material, moulds, etc. but production rates pu to 4000 moulds per hour are not unusual.
The pot for filling and molding suppositories and lipsticks are suitable for screwing on our main drive.
The mould as per the requirement of customer can be designed at extra cost.
Jayesh Patel (Jayshree Tablet Science)
Plot No. 8, Dev Estate, B/s National Riffel, Phase-i ,Gidc, Vatwa,, Rajkot, Gujarat - 382445, India
Share us via
