JBTC offers exclusive range of Magnesia Bricks of top notch companies as well as its own lineage. Magnesia Bricks are basic refractory materials different grade magnesites used as raw materials produce Magnesia bricks of various qualities. MgO materials are used extensively in basic oxygen and electric arc steelmaking refractories. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded/Fused Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability.   BURNED MAGNESITE BRICK : Material and Technique  : burned magnesia as raw material Property  : good high-temperature performance, strong slag resistance Application  : used in permanent linings of EAF and steel Convertors, lime kilns, glass tank regenerators, torpedo cars and non-ferrous furnaces FUSED MAGNESITE BRICK : Material and Technique  : made from fused magnesia, shaped under high pressure, fired under ultra high temperature and finished with post technical treatment Property  : high bulk density, good high-temperature performance and strong hydration resistance Application  : used in the tapping hole of the convertor with severe slag corrosion and wear, the slag line of non-ferrous furnaces, the tapping hole of metal mixer furnaces, and chimney block of glass tank regenerator The protection of MgO and MgCr bricks against hydration by means of impregnation with an aqueous kieserite solution is done through state-of-the-art technology and offers sufficient hydration protection under normal circumstances

JBTC offers exclusive range of LADDLE SLEEVES with various qualities we guarantee our material to be of superior quality. Ladle Sleeves  are manufactured using high grade raw material and advanced technology by our professionals. The offered range are widely demanded for applications like lining furnaces, kilns, fireboxes, boilers, etc. Known for fine finish, high strength, durability and ability to withstand extreme temperature & pressure, these are available in various sizes and shapes to fulfill the wide demands of the clients. Aluminum transfer ladles require an abrasion resistant not wetting castable.  These castables also need to be able to take repeated thermal shock stresses.  The completed ladles also have to be able to take physical abuse.  We have a selection of non-wetting castables for this demanding application. The pouring spout often experiences greater amounts of wear when compared to the rest of the ladle.  We can also offer custom replaceable inserts for just the pouring spouts of your existing designs. We also have experience relining ladle lids for your transfer applications.  No transfer ladle is complete without a lid.  The increased heat retention leads to increased transfer times.   The lids also keep your personnel safe from splashes. We offer these Fire Resistant Ladle Sleeves to our valuable clients at industry leading prices.

• MaterialMetal
• ColorBrown
• Voltage220V
• Power1-3kw
• Driven TypeElectric
• Warranty2years

JBTC offers exclusive range of LOW ALUMINA bricks with various qualities we guarantee our bricks to be of superior quality. The term Low Alumina refers to the bricks having AL203 content lower than 47.50%. They are designed primarily for ladles. These 50% lower alumina class brick have low porosity and expand upon reheating to 2910°F (1600°C) - desirable features for ladle applications since they minimize joints between brick, giving a near monolithic lining at service temperature. These brick are also characterized by low thermal expansion and good resistance to spalling. Many high-temperature industries use them as backup brick, alumina products based on high purity bauxitic kaolin, and other ingredients in the matrix, provide exceptional load-bearing ability, alkali resistance and low porosity. These qualities make such brick an excellent choice for preheater towers and calcining zones of rotary kilns.

JBTC offers exclusive range of MAG-CHROME bricks as per the customer demand we have the bricks from world leaders in refractory as well as our own lineage. Magnesite Chrome Brick  is made of some preliminary synthesis high purity raw materials. The high purity raw refractories should be high pressure formed, ultra high temperature fired and then go through some other post-treatment process and system, finally made the magnesite chrome brick. The magnesia chrome brick has high room temperature compressive strength, low porosity, strong erosion resistance and scouring resistance, etc. There are three types of Mag-Chrome bricks : ORDINARY MAGNESITE CHROME BRICK : Material and Technique  : made from sintered magnesia and chrome ore and sintered at high temperature Property  : having higher bulk density and stronger thermal resistance than the magnesite brick Application  : used in cement rotary kilns, glass kiln regenerators, permanent lining of steel furnace permanent and refining ladle permanent lining of refining ladle. DIRECT-BONDED MAGNESITE CHROME BRICK : Material and Technique  : made of low impurity chrome ore and high purity magnesia and fired at high temperature over 1700? Property  : strong slag resistance and good performance under high temperature  Applied in cement rotary kilns, electric arc furnaces, and non-ferrous metal furnaces REBONDED MAGNESITE-CHROME BRICK AND SEMI-REBONDED MAGNESITE-CHROME BRICK : Material and Technique  : made with synthetic fused magnesia, shaped under high pressure and fired at ultra high temperature  Property  : Thanks to the high purity of the raw material, the product has good high temperature performance, high thermal resistance, low air-permeability, and strong slag resistance  Application  : used in tapping hole of AOD furnace, the lower vessel of vacuum chamber and snorkel of RH furnace, and the slag line of high temperature furnaces.  

JBTC offers exclusive range of HIGH ALUMINA bricks with various qualities we guarantee our bricks to be of superior quality. The term High Alumina refers to the bricks having AL203 content of 47.50% atleast or higher High alumina bricks require bauxite to be manufactured. Bauxite is a naturally occurring mineral which is also found in kaolin-tic clays. These two substances are taken as raw materials and roasted together to produce a high refractory material. This material is used to make high alumina bricks that find applications in not only kilns and furnaces but also cement, iron and steel, and glass industries. Our high alumina bricks are not only very hard and thermal resistant but also good at electrical insulation. High-alumina brick are resistant to acid slags, that is, those high in silica. Basic components in slag, such as MgO, CaO, FeO, Fe2O3 and MnO2 react with high-alumina brick, particularly brick high in silica. As Al2O3 content increases, slag resistance generally improves We offer these bricks with varying percentages of alumina and Fe2O3 and in different shapes and sizes according to the requirement. High alumina brick is a kind of neutral refractories. It is manufactured from bauxite or other refractory raw materials within high alumina formed by molding and calcination. High aluminum refractory bricks has high refractoriness, high load softening temperature, thermal shock stability, good slag resistance, acid, alkali, peeling resistance, erosion resistance and so on. High alumina brick is mainly used for electric furnace top, blast furnace, hot air stove, ladle, cement kiln, glass kiln and other thermal furnace lining. High alumina brick is widely used in iron, steel, chemicals, cement and other industries. We have different kind of High Alimuna Bricks mainly : 60% ALUMINA GRADE : The 60% alumina class is a large, popular class of products. These brick are used in the steel industry, as well as rotary kilns. Brick in this class are made from a variety of raw materials. Some are produced from calcined bauxitic kaolin and high purity clay to provide low levels of impurities. As a result of firing to high temperature, these brick have low porosity, excellent hot strength and creep resistance, and good volume stability at high temperatures. 70% ALUMINA GRADE : This is the most frequently used high- alumina product class because of its excellent and cost-effective performance in multiple environments. Applications include the steel-industry and cement and lime rotary kilns. Most brick in this class are based on calcined bauxite and fireclay. Brick are usually fired to fairly low temperatures to prevent excessive expansion in burning which causes problems in final brick sizing. Expansion is caused by reaction of the siliceous ingredients with bauxite to form mullite. The brick typically undergo large amounts of secondary expansion when heated. This is advantageous in reducing the size of joints between brick and providing a tight vessel structure, e.g., a rotary kiln. A higher cost and higher quality alternative to producing a 70% alumina brick is represented by brands based on high purity calcined bauxitic kaolin. These brick have superior high temperature strength and refractoriness and significantly lower porosity than typical products based on calcined bauxite. Due to their more homogeneous structure, they show somewhat less expansion on reheating than bauxite-based products. 80% ALUMINA GRADE : These products are based primarily on calcined bauxite with additions of various amounts of other fine aluminas and clay materials. They are usually fired at relatively low temperatures to maintain consistent brick sizing. Most brick in this class have about 20% porosity, good strength and thermal shock resistance. Because they are relatively inexpensive, perform well and are resistant to most slag conditions present in steel ladles, they are used extensively in steel ladle applications. 90% AND 99% ALUMINA GRADE : These brick contain tabular alumina as the base grain and may include various fine materials such as calcined alumina, clay and fine silica. As these brick generally have low impurity levels, alumina and silica typically make up 99% of the chemical composition. Usually, the only mineral phases present are corundum and mullite. Properties such as high hot strength, creep and slag resistance benefit from this purity level.

JBTC offers exclusive range of FIRE CLAY BRICKS with various qualities we guarantee our bricks to be of superior quality. Fire-clay refractory bricks are essentially hydrated aluminum silicates with minor proportions of other minerals. As a type these refractory bricks are extremely versatile and therefore can be put to numerous uses. These bricks are usually least costly of all refractory bricks and are extensively used in various industries including iron and steel industry, nonferrous metallurgy, glass industry, and cement industry. Fire Clay bricks, using high alumina bauxite as raw refractory material which is being carefullly selected and then be shaped and burn in tunnel kiln, finnaly made the clay brick.   Fire-clay refractory bricks are essentially hydrated aluminum silicates with minor proportions of other minerals. As a type these refractory bricks are extremely versatile and therefore can be put to numerous uses. These bricks are usually least costly of all refractory bricks and are extensively used in various industries including iron and steel industry, nonferrous metallurgy, glass industry, and cement industry. Fire Clay bricks, using high alumina bauxite as raw refractory material which is being carefullly selected and then be shaped and burn in tunnel kiln, finnaly made the clay brick. Clay bricks is very cheap, it is the best choice for normal high temperature kiln. Clay bricks is one kind of weak acid refractory products, it can resist erosion from acid slag and acid gas. Clay brick's thermal performance is good, it also has good resistance to rapid cooling and hot. Clay refractory bricks are widely used in blast furnace hot stove, carbon roaster and other high temperature furnace which have an higher requires in Load softening temperature.

JBTC offers exclusive range of MAG-CHROME bricks as per the customer demand we have the bricks from world leaders in refractory as well as our own lineage. Magnesite Chrome Brick  is made of some preliminary synthesis high purity raw materials. The high purity raw refractories should be high pressure formed, ultra high temperature fired and then go through some other post-treatment process and system, finally made the magnesite chrome brick. The magnesia chrome brick has high room temperature compressive strength, low porosity, strong erosion resistance and scouring resistance, etc. There are three types of Mag-Chrome bricks : ORDINARY MAGNESITE CHROME BRICK : Material and Technique  : made from sintered magnesia and chrome ore and sintered at high temperature Property  : having higher bulk density and stronger thermal resistance than the magnesite brick Application  : used in cement rotary kilns, glass kiln regenerators, permanent lining of steel furnace permanent and refining ladle permanent lining of refining ladle. DIRECT-BONDED MAGNESITE CHROME BRICK : Material and Technique  : made of low impurity chrome ore and high purity magnesia and fired at high temperature over 1700? Property  : strong slag resistance and good performance under high temperature  Applied in cement rotary kilns, electric arc furnaces, and non-ferrous metal furnaces REBONDED MAGNESITE-CHROME BRICK AND SEMI-REBONDED MAGNESITE-CHROME BRICK : Material and Technique  : made with synthetic fused magnesia, shaped under high pressure and fired at ultra high temperature  Property  : Thanks to the high purity of the raw material, the product has good high temperature performance, high thermal resistance, low air-permeability, and strong slag resistance  Application  : used in tapping hole of AOD furnace, the lower vessel of vacuum chamber and snorkel of RH furnace, and the slag line of high temperature furnaces.  

JBTC offers exclusive range of STOPPER with various qualities we guarantee our material to be of superior quality. Our Isostatically pressed nozzles for foundry applications have the following qualities : High dimensional stability Long service life Consitant casting times Low slagging Individually designed For all receptor systems All our Monoblock Stoppers are finished according to client specifications and are available with specially formulated nose Armour Glaze hardening characteristics giving enhanced erosion and abrasion resistance.

JBTC offers exclusive range of Magnesia Bricks of top notch companies as well as its own lineage. Magnesia Bricks are basic refractory materials different grade magnesites used as raw materials produce Magnesia bricks of various qualities. MgO materials are used extensively in basic oxygen and electric arc steelmaking refractories. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded/Fused Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability.   BURNED MAGNESITE BRICK : Material and Technique  : burned magnesia as raw material Property  : good high-temperature performance, strong slag resistance Application  : used in permanent linings of EAF and steel Convertors, lime kilns, glass tank regenerators, torpedo cars and non-ferrous furnaces FUSED MAGNESITE BRICK : Material and Technique  : made from fused magnesia, shaped under high pressure, fired under ultra high temperature and finished with post technical treatment Property  : high bulk density, good high-temperature performance and strong hydration resistance Application  : used in the tapping hole of the convertor with severe slag corrosion and wear, the slag line of non-ferrous furnaces, the tapping hole of metal mixer furnaces, and chimney block of glass tank regenerator The protection of MgO and MgCr bricks against hydration by means of impregnation with an aqueous kieserite solution is done through state-of-the-art technology and offers sufficient hydration protection under normal circumstances

JBTC offers exclusive range of HIGH ALUMINA bricks with various qualities we guarantee our bricks to be of superior quality. The term High Alumina refers to the bricks having AL203 content of 47.50% atleast or higher High alumina bricks require bauxite to be manufactured. Bauxite is a naturally occurring mineral which is also found in kaolin-tic clays. These two substances are taken as raw materials and roasted together to produce a high refractory material. This material is used to make high alumina bricks that find applications in not only kilns and furnaces but also cement, iron and steel, and glass industries. Our high alumina bricks are not only very hard and thermal resistant but also good at electrical insulation. High-alumina brick are resistant to acid slags, that is, those high in silica. Basic components in slag, such as MgO, CaO, FeO, Fe2O3 and MnO2 react with high-alumina brick, particularly brick high in silica. As Al2O3 content increases, slag resistance generally improves We offer these bricks with varying percentages of alumina and Fe2O3 and in different shapes and sizes according to the requirement. High alumina brick is a kind of neutral refractories. It is manufactured from bauxite or other refractory raw materials within high alumina formed by molding and calcination. High aluminum refractory bricks has high refractoriness, high load softening temperature, thermal shock stability, good slag resistance, acid, alkali, peeling resistance, erosion resistance and so on. High alumina brick is mainly used for electric furnace top, blast furnace, hot air stove, ladle, cement kiln, glass kiln and other thermal furnace lining. High alumina brick is widely used in iron, steel, chemicals, cement and other industries. We have different kind of High Alimuna Bricks mainly : 60% ALUMINA GRADE : The 60% alumina class is a large, popular class of products. These brick are used in the steel industry, as well as rotary kilns. Brick in this class are made from a variety of raw materials. Some are produced from calcined bauxitic kaolin and high purity clay to provide low levels of impurities. As a result of firing to high temperature, these brick have low porosity, excellent hot strength and creep resistance, and good volume stability at high temperatures. 70% ALUMINA GRADE : This is the most frequently used high- alumina product class because of its excellent and cost-effective performance in multiple environments. Applications include the steel-industry and cement and lime rotary kilns. Most brick in this class are based on calcined bauxite and fireclay. Brick are usually fired to fairly low temperatures to prevent excessive expansion in burning which causes problems in final brick sizing. Expansion is caused by reaction of the siliceous ingredients with bauxite to form mullite. The brick typically undergo large amounts of secondary expansion when heated. This is advantageous in reducing the size of joints between brick and providing a tight vessel structure, e.g., a rotary kiln. A higher cost and higher quality alternative to producing a 70% alumina brick is represented by brands based on high purity calcined bauxitic kaolin. These brick have superior high temperature strength and refractoriness and significantly lower porosity than typical products based on calcined bauxite. Due to their more homogeneous structure, they show somewhat less expansion on reheating than bauxite-based products. 80% ALUMINA GRADE : These products are based primarily on calcined bauxite with additions of various amounts of other fine aluminas and clay materials. They are usually fired at relatively low temperatures to maintain consistent brick sizing. Most brick in this class have about 20% porosity, good strength and thermal shock resistance. Because they are relatively inexpensive, perform well and are resistant to most slag conditions present in steel ladles, they are used extensively in steel ladle applications. 90% AND 99% ALUMINA GRADE : These brick contain tabular alumina as the base grain and may include various fine materials such as calcined alumina, clay and fine silica. As these brick generally have low impurity levels, alumina and silica typically make up 99% of the chemical composition. Usually, the only mineral phases present are corundum and mullite. Properties such as high hot strength, creep and slag resistance benefit from this purity level.

JBTC offers exclusive range of LADDLE SLEEVES with various qualities we guarantee our material to be of superior quality. Ladle Sleeves  are manufactured using high grade raw material and advanced technology by our professionals. The offered range are widely demanded for applications like lining furnaces, kilns, fireboxes, boilers, etc. Known for fine finish, high strength, durability and ability to withstand extreme temperature & pressure, these are available in various sizes and shapes to fulfill the wide demands of the clients. Aluminum transfer ladles require an abrasion resistant not wetting castable.  These castables also need to be able to take repeated thermal shock stresses.  The completed ladles also have to be able to take physical abuse.  We have a selection of non-wetting castables for this demanding application. The pouring spout often experiences greater amounts of wear when compared to the rest of the ladle.  We can also offer custom replaceable inserts for just the pouring spouts of your existing designs. We also have experience relining ladle lids for your transfer applications.  No transfer ladle is complete without a lid.  The increased heat retention leads to increased transfer times.   The lids also keep your personnel safe from splashes. We offer these Fire Resistant Ladle Sleeves to our valuable clients at industry leading prices.