JC Equipments Private Limited

Madukkarai, Coimbatore, Tamil Nadu

Specifitaions for Timber Cooling Tower:

• Temperature 4C To 30C
• 2 Cell Timber Cooling Tower
• 3 Cell Timber Cooling Tower
• 5 TR T0 1000 TR
• Uniform water spraying
• Fow Rate from 5 M3/Hr To 500 M3/Hr

Timber Cooling Tower Types are :Timber Induced Draft Cross & Counter Flow Cooling Tower

Send Your LPM, Inlet Temperature, Out let temperature, WBT to get free quote for your Timber Cooling Tower requirement. Send mail toinfo@jcequipments.com

• Maximum Wind Velocity KMP
• Elevation Above sea Level M
• Maximum Temperature 0 C
• Minimum Temperature 0 C
• Maximum Humidity %
• Minimum Humidity %

Design Data

• Design Water Flow Rate - M3 /hr
• Hot Water Inlet Temperature - 0 C
• Cold Water Outlet Temperature - 0 C
• Wet Bulb Temperature at site - 0 C

Timber Cooling Tower Useful for :Air conditioning Industries, Chemical Industries, Diesel generating Industries, Chilling plants

JC Timber Cooling Tower Design

Economy in Operation

• JC Timber Cooling System are designed for the highest effieiency at the lowest operating cost.
• Fans gear boxes, fill and drift eliminators are optimized to deliver maximum cooling with minum applied horsepower for lower operating cost.

Best Performance

• JC Timber Cooling System are providing more wetted surface area for uniform water distribution and higher heat trasfer rate.

Architectural Compatability

• JC Timber Cooling Towers are designed to a low profile. So the appearance and general configuration blends harmoniously with surroundings.
• Performance and attractive appearnance are demanded.

Maintenance Free

• JC Timber Cooling System are used maintenance free materials throught the tower. The materials are used in structural and functional components, all steel ishot-dipped galvanized after the fabrication.

Tips for Timber Cooling Tower Installation and Maintenance:

• Install Timber Cooling System very near to you plant.
• Regular maintainence should be done regularly to avoid problems and efficiency.
• Monitor the wooden quality for every 3 months one.

Types and Methods of Timber Cooling Tower:

1. Conventional Method of Timber Cooling System [Natural Draft Timber / Fanless Filless Timber]
2. Mechanical Type of Timber Cooling Tower [ Induced Draft Counter Flow Timber Cooling tower and Induced Draft Cross Flow Timber]

Natural cooling System reduce the operational costs due to not having mechanical fans. The water is cooled with natural atmospheric air traveling and the water is sprayed with the help of Spray nozzles and covered with louver covers. So this methods are called as atmospheric cooling tower or Fanless timber and fillless timber cooling tower.

JC Timber Cooling Tower are Energy saving fanless Cooling Towers in India.

• The cross flow will have mechanical Fan and the water will be cooled with help of mechanical Fan.
• JC Mechanical timber cooling towers provides good thermal performance and low drift loss.
• JC Equipments prefer the seasoned chemically treated, lightwood used to manufacture the timber Cooling Towers.
• Also we use this same wood for Splash bars, Drift Eliminator, Fan duct for our JC Timber Cooling Tower.

Applications for Timber Cooling Tower.

Types of Closed Circuit Cooling Tower

• Combined Flow
• Counter Flow

We may well include various percent of the cooling water from the available water resources to the closed circuit cooling system and we be able to decrease the cooling tower size.

Mixing ration means the percentage of the added water. If our mixing ratio is zero, it is called absolutely closed system. When the mixing ratio is 100%, it is called an open system.

Closed Circuit Cooling Tower Water Temperature

Closed Circuit Cooling Towers are accomplished of incoming fluid temperatures as high as 180F (82.2C), .

Closed Circuit Cooling Tower Design

Our Closed Circuit Cooling System gives completely rated thermal presentation, which also by yourself verified over special types of flow and high temperature requirements. Closed Circuit Cooling Towers are high effciency and water saving.

Features of RCC Cooling Tower

• We manufactured Cross flow type and Counter Flow Type cooling towers
• Lower maintenance for this type of cooling tower.

RCC Cooling Tower Design

• JC Equipments are using latest design technology to manufacturing the RCC cooling tower.
• We design and developed the cross flow and counter flow type for specific requirements.
• We are Structural and standard design of RCC Cooling Tower in the market.
• Our new special design makes it a less important maintained rotary sprinklers or tiny nozzles.

RCC Design of Cooling Tower:For your RCC Cooling Tower Design requirements send your product specification. Our designing team will design for your requirements.

RCC Cooling Tower at Power Plant:For All types of power plants we offer our rcc cooling tower. The RCC Cooling Towers are mostly used in the power plants. we offer you to go for RCC Cooling Tower for your thermal power plants.

Types of RCC Cooling Tower

• Cross Flow Cooling Tower
• Counter Flow Cooling Tower

Capacity of RCC Cooling Tower

• Capacity Available : 500 m3/hr to 4, 500 m3/hr per cell and upto any capacity in multi cell.
• RCC Cooling Tower Capacity 200CuM/hr. to 3500 CuM/hr. per cell
• JC Equipments has a enormous variety of models to go well with different requirements.

RCC Cooling Tower Applications

• RCC Cooling Tower in Power Plant,
• Engineering industry plants,
• Industrial processing units
• Huge industry Plants,
• Steel Manufacturing industry plants
• Power Plants,
• Cement factory industries,
• Chemical Processing Industries are used this type of cooling tower

Dry Cooling Tower Design

• JC Equipments are designed and developed with to work with any size for various industries.
• Our Dry Cooling Tower designing department is routine updated with world standards according to the International Standards designing by CTI membership.
• Dry Cooling Tower Designing teams are technically qualified of engineer with facility to meet various application need.

Applications of Dry Cooling Tower

• Dry Cooling Tower used for air compressor
• Lots power plants are using the Dry Cooling Tower
• Steel manufacturing industries are used Dry Cooling System
• Dry cooling towers for geothermal power plants
• Diesel Power Plants are using this type of cooling tower

Advantages of Dry Cooling Tower

• No water consumption in this type of Dry Cooling Tower System because the air does not in a straight line contact between the water.
• This cooling tower efficacy ensures minimum ecological impact
• A huge of water gets conserved on using dry cooling towers.
• Less water resources and greater than before water pollutions concerns have led to explosive development of Dry Cooling worldwide

Features of Natural Draft Cooling Tower

• No requirement Fan, Motor and PVC fills.
• Well planned and designing
• Power saving and Low maintenance
• Superior Cooling good organization
• Installed for various type of cooling applications
• Easy to cleaning and maintenance
• Environmental Friendly
• No Mechanical Noise
• Safety of operation