JC Equipments Pvt. Ltd.

Madukkarai, Coimbatore, Tamil Nadu

Specifitaions for Timber Cooling Tower:

• Temperature 4C To 30C
• 2 Cell Timber Cooling Tower
• 3 Cell Timber Cooling Tower
• 5 TR T0 1000 TR
• Uniform water spraying
• Fow Rate from 5 M3/Hr To 500 M3/Hr

Timber Cooling Tower Types are : Timber Induced Draft Cross & Counter Flow Cooling Tower

Send Your LPM, Inlet Temperature, Out let temperature, WBT to get free quote for your Timber Cooling Tower requirement. Send mail to jc@thecoolingtowers.com

• Maximum Wind Velocity KMP
• Elevation Above sea Level M
• Maximum Temperature 0 C
• Minimum Temperature 0 C
• Maximum Humidity %
• Minimum Humidity %

Design Data

• Design Water Flow Rate - M3 /hr
• Hot Water Inlet Temperature - 0 C
• Cold Water Outlet Temperature - 0 C
• Wet Bulb Temperature at site - 0 C

Timber Cooling Tower Useful for : Air conditioning Industries, Chemical Industries, Diesel generating Industries, Chilling plants

JC Timber Cooling Tower Design

Economy in Operation

• JC Timber Cooling System are designed for the highest effieiency at the lowest operating cost.
• Fans gear boxes, fill and drift eliminators are optimized to deliver maximum cooling with minum applied horsepower for lower operating cost.

Best Performance

• JC Timber Cooling System are providing more wetted surface area for uniform water distribution and higher heat trasfer rate.

Architectural Compatability

• JC Timber Cooling Towers are designed to a low profile. So the appearance and general configuration blends harmoniously with surroundings.
• Performance and attractive appearnance are demanded.

Maintenance Free

• JC Timber Cooling System are used maintenance free materials throught the tower. The materials are used in structural and functional components, all steel is hot-dipped galvanized after the fabrication.

Tips for Timber Cooling Tower Installation and Maintenance:

• Install Timber Cooling System very near to you plant.
• Regular maintainence should be done regularly to avoid problems and efficiency.
• Monitor the wooden quality for every 3 months one.

Types and Methods of Timber Cooling Tower:

1. Conventional Method of Timber Cooling System [Natural Draft Timber / Fanless Filless Timber]
2. Mechanical Type of Timber Cooling Tower [ Induced Draft Counter Flow Timber Cooling tower and Induced Draft Cross Flow Timber]

Natural cooling System reduce the operational costs due to not having mechanical fans. The water is cooled with natural atmospheric air traveling and the water is sprayed with the help of Spray nozzles and covered with louver covers. So this methods are called as atmospheric cooling tower or Fanless timber and fillless timber cooling tower.

JC Timber Cooling Tower are Energy saving fanless Cooling Towers in India.

• The cross flow will have mechanical Fan and the water will be cooled with help of mechanical Fan.
• JC Mechanical timber cooling towers provides good thermal performance and low drift loss.
• JC Equipments prefer the seasoned chemically treated, lightwood used to manufacture the timber Cooling Towers.
• Also we use this same wood for Splash bars, Drift Eliminator, Fan duct for our JC Timber Cooling Tower.

Applications for Timber Cooling Tower. How to Design Timber Cooling Tower?

JC Equipments are designing the timber cooling tower as per the client requirements and we having 23 years experienced in cooling tower industry. We have well designed and develop the timber cooling tower for various industries. Our designing teams are very qualified with designing knowledge. We are most designed to thermal plants and also a many power plants are cooled simply by air using this type cooling tower. The following types are available here, Induced Draft Cross and Counter Flow cooling tower. The system is designed for the highest efficiency.

Dry Cooling Tower Design

• JC Equipments are designed and developed with to work with any size for various industries.
• Our Dry Cooling Tower designing department is routine updated with world standards according to the International Standards designing by CTI membership.
• Dry Cooling Tower Designing teams are technically qualified of engineer with facility to meet various application need.

Applications of Dry Cooling Tower

• Dry Cooling Tower used for air compressor
• Lots power plants are using the Dry Cooling Tower
• Steel manufacturing industries are used Dry Cooling System
• Dry cooling towers for geothermal power plants
• Diesel Power Plants are using this type of cooling tower

Advantages of Dry Cooling Tower

• No water consumption in this type of Dry Cooling Tower System because the air does not in a straight line contact between the water.
• This cooling tower efficacy ensures minimum ecological impact
• A huge of water gets conserved on using dry cooling towers.
• Less water resources and greater than before water pollutions concerns have led to explosive development of Dry Cooling worldwide

How to Design Dry Cooling Tower?

We are designing the dry cooling tower as per the client requirements and we having 23 years experienced in cooling tower industry. We have well designed and develop the timber cooling tower for various industries. Our designing department is updated and very qualified engineers with designing knowledge and designing standards by cooling tower technology (CTI Membership).

If the thermal power plant is not located on the seaside or near a huge lake and if the water is either too exclusive to use a wet cooling tower, then the only cooling preference is using a dry cooling tower. A huge of water gets conserved on using dry cooling towers and Optimized cooling tower designing and develop using latest materials and latest technology construction methods.

In Dry cooling tower, Reduced yearly operating costs and it also No decomposition caused by air and this type of cooling tower performance ensures minimum ecological impact.

Cooling Tower categorized into two major type natural draft Cooling tower and forced draft cooling tower. The differences between them are :

Natural Draft Cooling Tower Vs Forced Draft Cooling Tower

Advantages of Natural Draft Cooling Tower

1. Investment is costly but very less operational cost.2. No power required for fans operation3. Very Long Life construction period

Applications of Natural draft Cooling Tower

1. All Power Plants2. Thermal Power Plants3. Nuclear Power Plants4. Cement Plants5. Heat industries6. Oil Plants7. Power station8. Chemical industries and foundry9. Chilling plants10. Steel factory Natural Draft Cooling Tower Construction: The natural draft cooling towers are exceptionally helpful and cost-effective where huge amounts of high cooling are compulsory over a length of time and also most excellent natural draft cooling tower production services, we are bonded with a great deal well-regarded organizations. The JC Equipments are offers you, design, manufacturing and construction expertise.

How to Design Natural Draft Cooling Tower?

We are very specialist in the Natural Draft cooling tower designing and development in india and we designing the coolign tower as per the client requirements and we also well designed and develop the Natural Draft cooling tower for various industries. JC Equipments are particularly designed for power plants and industries and the required parts can be designed in various ways. This type of cooling tower is very costly and high quality but very operational cost is less. Natural draft wet cooling towers are mostly used in power plants and used to cool water.

JC Equipments offers the FRP Cooling Tower and also we manufactured the FRP types are Square Type, Bottle Shape, Seamless. Heaviness and Size will be at the same time as per our standards and customer requirements.

We are proud to manufacturers the timber type cooling tower, we are well designed and developed to this model. This type includes for the most part of conservative method

We are engaged to develop the Dry Cooling Tower, this is one of the newest model in the industry. JC Equipments are very specially to developed and designed manufacturers of this model.

We are leading Manufacturers of the RCC Cooling Tower in India. Our Range of RCC Coling Tower Capacity 200CuM/hr. to 3500 CuM/hr. per cell. Lofty efficiency gear boxes, axial flow fans and drive shafts.

JC are one of the well famous and Manufacturers of Natural Draft Cooling Tower in India. Can be installed this type of cooling tower for any range of cooling applications. In this Type, Power is not Required.

We are specialized designers and Manufacturers of the closed circuit Cooling Tower in India, the two types are Combined Flow, Counter flow cooling tower and also manufacture the Closed Loop Cooling tower.