Our Products
Our organization stands tall among the recognized Suppliers and Exporters of Bronze Powder. The powder we make accessible is widely utilized as a part of watch segments, vehicle segments, chemicals and some more. With a specific end goal to meet the mass and critical necessities of the purchasers, we keep up an expansive supply of the powder in our roomy distribution center. Purchasers can get it at sensible rates from us.
Applications / Uses :
Specifications
Bronze - Cu/Sn - Irregular Size |
- |
|||||
---|---|---|---|---|---|---|
Grade |
Chemical Analysis (AAS) |
Particle Size - Dry Sieve |
||||
(ASTM B-214) |
||||||
- |
Copper |
Tin |
Zinc |
>75 μm |
>45 μm |
|
- |
(%) |
(%) |
(%) |
(%) |
(%) |
|
15 |
83 - 85 |
14 - 16 |
1.5 – 2.5 |
3 max |
Balance |
|
82 |
79 - 81 |
18 - 20 |
1.5 – 2.5 |
3 max |
Balance |
|
91 |
88 - 90 |
8.5 - 9.5 |
1.5 – 2.5 |
3 max |
Balance |
|
- |
Copper |
Tin |
Zinc |
> 150 μm |
>45 μm |
|
- |
(%) |
(%) |
(%) |
(%) |
(%) |
|
52 |
92.5 – 94.5 |
4.5 – 5.5 |
Balance |
2 max |
Balance |
Dear Sir,
We Have Beryllium Copper Coil Hard - Be : 1.8 % To 2 % Available Sizes : 0.1 mm to 0.8 mm - Ready Stock of 25 to 30 kgs.
Applications/Uses Of Aluminium Powder :
The company shares glorious credentials with the eminent Suppliers and Exporters of Aluminium Powder. It is used in exothermic applications and exothermic welding applications. In order to meet the bulk and urgent requirements of the buyers, we maintain a large stock of the powder in our state-of-the-art warehouse. One can obtain it at nominal rates from us.
Aluminium Powder Grades
Grade |
Microns |
Density |
Sieve |
Applications |
---|---|---|---|---|
- |
- |
- |
Analysis |
- |
- |
- |
(gm/cc) |
(%) |
- |
400 |
+850µ |
1.0-1.2 g/cm3 |
5% Max |
Ferro Alloys |
- |
-850µ+105µ |
- |
75% Min |
- |
- |
-105µ |
- |
20% Max |
- |
350 |
+600µ |
1.0-1.2 g/cm3 |
5% Max |
Brake Linings |
- |
-600µ+53µ |
- |
80% Min |
- |
- |
-53µ |
- |
15% Max |
- |
60 |
+150µ |
0.9-1.2 g/cm3 |
15% Max |
Flux |
- |
-150+75µ |
- |
15-30% |
- |
|
-75µ+45µ |
|
25-40% |
- |
- |
-45µ |
- |
25-40% |
- |
50 |
+150µ |
0.9-1.2 g/cm3 |
10% Max |
Refractories |
- |
-150µ+45µ |
- |
40-50% |
- |
- |
-45µ |
- |
40-50% |
- |
40 |
+75µ |
0.9-1.1 g/cm3 |
12% Max |
Paints & |
- |
-75µ+45µ |
- |
20-35% |
Pigments |
- |
-45µ |
- |
65% Min |
- |
Aluminium Granules Grades
Grade |
Millimeter |
Density |
Sieve |
Applications |
---|---|---|---|---|
- |
- |
(gm/cc) |
Analysis |
- |
- |
- |
- |
(%) |
- |
101 |
0 - 1.5 mm |
1.0 - 1.4gm/cc |
>1.5mm = 5% Max |
Exothermic Process |
102 |
0 - 2.0 mm |
1.0 - 1.4gm/cc |
>2.0mm = 5% Max |
Ferro Alloys / |
- |
- |
- |
- |
Thermite reduction process |
103 |
0 - 3.0 mm |
1.0 - 1.4gm/cc |
>3.0mm = 5% Max |
Deoxidizers in steel mill |
121 |
0.25 - 2.0 mm |
1.0 - 1.4gm/cc |
>2.0mm = 5% Max |
Shot peening / |
- |
- |
- |
>0.25mm = Balance |
Shot blasting |
- |
- |
- |
< 0.25mm = 20% Max |
- |
Aluminium Concrete Powder Grades
Grade |
Microns |
Density |
Sieve |
Surface |
Applications |
---|---|---|---|---|---|
- |
- |
- |
Analysis |
Area |
- |
- |
- |
(gm/cc) |
(%) |
(SQ.CM/GM) |
- |
- |
- |
- |
- |
Typical |
- |
140 |
-45µ |
0.20-0.25 |
50%-65% |
8000 Min |
Light weight |
- |
- |
- |
- |
- |
concrete blocks |
130 |
-45µ |
0.20-0.25 |
60%-75% |
10000 Min |
Light weight |
- |
- |
- |
- |
- |
Concrete blocks |
120 |
-45µ |
0.20-0.25 |
80%-90% |
12000 Min |
Light weight |
- |
- |
- |
- |
- |
Concrete blocks |
108 |
-45µ |
0.20-0.25 |
90% Min |
15000 Min |
Light weight |
- |
- |
- |
- |
- |
Concrete blocks |
325 |
-45µ |
- |
- |
60% Min |
Aerated Cement |
- |
- |
- |
- |
- |
Concrete blocks |
Aluminium Fire Powder Grades
Grade |
Microns |
Density |
Sieve |
Surface |
Applications |
---|---|---|---|---|---|
- |
- |
- |
- |
Area |
- |
- |
- |
(gm/cc) |
Analysis |
(SQ.CM/GM) |
- |
- |
- |
- |
(%) |
Typical |
- |
40 |
-45µ |
0.20-0.25 |
50%-60% |
- |
Flower pots, |
- |
- |
- |
- |
- |
Valcanos in Fire works |
30 |
-45µ |
0.15-0.18 |
60%-75% |
- |
Chakkars, |
- |
- |
- |
- |
- |
Sparklers in Fire works |
20 |
-45µ |
0.20-0.25 |
80%-90% |
- |
Light crackers |
- |
- |
- |
- |
- |
in Fire works |
15 |
-45µ |
0.25-0.35 |
85%-95% |
- |
Heavy crackers, |
- |
- |
- |
- |
- |
Bombs in Fire works |
8 |
-45µ |
0.40-0.60 |
98% Min |
- |
Arials,Fancy and Heavy crackers |
260 |
-45µ |
0.25-0.35 |
25%-40% |
2500(+,-500) |
Pesticide |
240 |
-45µ |
0.25-0.32 |
40%-50% |
3500(+,-500) |
Pesticide |
320 |
-45µ |
0.20-0.25 |
70% Min |
8000 Min |
Slurry Explosives |
315 |
-45µ |
0.20-0.25 |
85% Min |
10000 Min |
Slurry Explosives |
Aluminium Paste Grades
Grade |
Microns |
Sieve |
V.M.% |
Leafing |
Stearic |
Surface |
APPLICATIONS |
- |
- |
Analysis |
(Typical) |
% |
Acid |
Area |
|
- |
- |
- |
- |
- |
- |
(SQ.CM/GM) |
|
- |
|
(%) |
|
(Min) |
(%) |
Typical |
|
15 |
-45µ |
95% Min |
0.32 |
0.75 |
2%-4% |
15000 |
Exterior coatings, |
- |
- |
- |
- |
- |
- |
- |
Heat resistent paint, |
- |
- |
- |
- |
- |
- |
- |
Anti corrisive |
12 |
-45µ |
98% Min |
0.32 |
0.75 |
2%-4% |
18000 |
Exterior coatings, |
- |
- |
- |
- |
- |
- |
- |
Heat resistent paint, |
- |
- |
- |
|
- |
- |
- |
Anti corrisive |
8 |
-45µ |
99% min |
0.32 |
0.75 |
2% -4% |
25000 |
Exterior coatings, |
- |
- |
- |
- |
- |
- |
- |
Heat resistent paint, |
- |
- |
- |
- |
- |
- |
- |
Anti corrisive |
6 |
-45µ |
99.2 % min |
0.32 |
0.75 |
2% -4% |
30000 |
Printing inks |
112 |
-45µ |
98% Min |
0.35 |
- |
- |
- |
Plastic coatings, |
- |
- |
- |
- |
- |
- |
- |
Anti corrosive, |
- |
|
|
|
- |
- |
- |
Ship coatings |
108 |
-45µ |
99% Min |
0.35 |
- |
- |
- |
Plastic coatings, |
- |
- |
- |
- |
- |
- |
- |
Anti corrosive, |
- |
- |
- |
- |
- |
- |
- |
Ship coatings |
230 |
-45µ |
70% Min |
25% Min |
- |
- |
- |
Automobile paints |
208 |
-45µ |
98% Min |
25% Min |
- |
- |
- |
Automobile paints |
15 |
-45µ |
90% Min |
65% Min |
|
|
1200 Min |
Plastic coatings |
18 |
-45µ |
98% Min |
65% Min |
- |
- |
1600 Min |
Plastic coatings |
22 |
-45µ |
-99% Min |
55% Min |
- |
- |
1800 Min |
Plastic coatings |
We are a prestigious trader, supplier, and exporter of a unique range of the Cooling fan. These cooling fans are widely used for various applications in many industries. The offered fan is widely demanded and appreciated in the market due to its remarkable features like perfect design, robust construction, long service life, optimum efficiency, smooth functioning, and many more. We give assurance to our customers that the offered fan is perfectly tested by the experts on various parameters before delivery. Furthermore, this Cooling fan is available at a market-leading price.
We are one of the recognized names in the industry, reckoned in offering the supreme quality of Energy Regulator. This Energy Regulator is are extremely demanded and appreciated by the customers due to its hassle-free performance, low maintenance, Long service life, Effective usage, Robust Design, and more. The offered energy regulator is great in performance and is highly used for various applications in many industries. This Energy Regulator is strictly checked by the checkers on several parameters to assure the product quality and durability. Our precious customers can avail of this Energy Regulator from us at a very competitive price.
The company is a prominent Trader, Exporter & Supplier of Aluminum Copper Bimetal Sheets. Copper (sheet metal) is cladded on pure Aluminum (base metal), both metals being diffused together to form an inseparable whole by roll bonding process. It is therefore not an alloy and copper layers are not Electro plated but are rather mechanically welded Aluminum sheets. We supply sturdy, durable and efficient Aluminum Copper Bimetal Sheets, Aluminum Copper Bimetal Washers, Aluminum Copper Bimetal Lugs, etc., at the market leading prices.
Applications
The organization remains among the conspicuous Trader, Exporters and Suppliers of Silvercopperbimetal Rivets. Utilizing premium quality material and propel innovation, The Silvercopperbimetal Rivets are durable, dimensionally exact, high in rigidity and are additionally consumption safe. Customers can benefit the most high review Silvercopperbimetal Rivets, AgCdO10 Rivets, AgNi Rivets, and so forth from us at reasonable costs.
Standard material offered by us includes
Electrical rivets are available in different sizes and shapes as designed by the users such as
Specifications
Contact Material | Brazing Material | Backing/Carrier Material |
---|---|---|
Ag | IS 2997/Bs 1845 | Copper |
Ag Ni 0.15 | with 2, 15, 43, 45, | Ag Bronze |
Ag Cu ( 3..10% ) | 50 and 60% Ag | Cu Fe 2 |
Ag Ni ( 10..40% ) | Cu Bronze | |
Ag CdO ( 10..15% ) | CuNi Alloys | |
Ag Pd ( 30..60% ) | ||
Ag C* | ||
Ag W* | ||
Ag WC* | ||
Cu W* | ||
Wires, Foils, Strips, Tapes, Sheets, Rivets, Discs*, Profiles* [*These Materials are available only in the marked form] | Wires, Strips, Foils | Wires, Strips, Foils, Stampings |
Additional Information:
Payment Terms : T/T,
Packaging Details : as per standard
Delivery Time : 1-3 Days