Screen wire mesh in different models having single, double and triple decks, depending on the requirement of customers. Vibrating screens are used in Sieving, Sorting, Grading, Sizing, Extracting, Conveying, Segregating, Granulating, Dewatering and other Separating and Filtrating Solutions.

Welded Wire Mesh (WWM), a relatively new product in India. Welded Wire Mesh is used as steel reinforcement in concrete, replacing the traditional cut & bend and placing of steel TMT bars. Welded Wire Mesh is used as steel reinforcement in concrete, replacing the traditional cut & bend and placing of steel TMT bars. We supply high quality WWM with precise dimensional control. The product will result considerable savings in time, labour and money. It is an Electric fusion welded prefabricated reinforcement consisting of a series of parallel longitudinal wires with accurate spacing welded to cross wires at the required spacing. This concept is a step forward in the mechanization of reinforcement laying. It is the easiest and correct solution for achieving the requirements of quality, reliability, speed and efficiency at construction site.

Advantages of Using Welded Wire Fabrics

1. Because bars are welded in a mat, the bars do not move when concrete is placed, insuring bars are in their proper position.
2. Since WWR is prefabricated and welded in plants, the risk of missing a bar is minimized.
3. The chance of improper bending of bars is reduced by using WWR since bending machines bend the mat as a single unit
4. The use of WWR minimized the chance of misplacement since only one type of mat is used on a given section.
5. Provide the exact size of reinforcement where needed through variable bar size and spacing, thereby reduces steel waste.
6. No site space needed for steel assembly.
7. Faster erection time means you can beat changing weather conditions.
8. Removes reinforcement placement from the critical path.
9. Less field labour needed.
10. The material fabrication is automated.
11. With faster construction, insurance premiums are reduced. For example on bridge deck construction the barrier walls can be constructed faster reducing the time for fall exposure and reducing insurance premium.
12. WWR can reduce construction time, thereby saving: Crane rental time Equipment leasing Increasing bonus
13. Lower material cost because not fabricating small bar.

Concrete ReinforcementStructural Slabs & WallsWWF instead of Individual Bars makes the job of reinforcing slabs/walls for residential, office and Institutional Buildings most quick and elegant. With detailing advantages, it also results in savings of 15 to 35%

Roads / PavementsLarge area Floor labs on ground, pavements, airports, runways, aprons etc to achieve crack-free joints less surfaces. Precast MembersPrecast elements which are thin or are difficult to reinforce such as curved arch flat members, Hyperbolic Paraboloid Shells, folded plate roof girders, fins, thin pardis or chajja drops.

Wire meshwirecloth can offerwide ranging characteristics dependent on the configuration of wire thickness in relation to aperture size, as well as type of weave, and can vary in texture from being as fine, soft and flexible as silk to being as rigid as steel plate. Many of the properties of wire cloth are not available using alternative metal media.

Screen wire mesh in different models having single, double and triple decks, depending on the requirement of customers. Vibrating screens are used in Sieving, Sorting, Grading, Sizing, Extracting, Conveying, Segregating, Granulating, Dewatering and other Separating and Filtrating Solutions.

Welded Wire Mesh (WWM), a relatively new product in India. Welded Wire Mesh is used as steel reinforcement in concrete, replacing the traditional cut & bend and placing of steel TMT bars. Welded Wire Mesh is used as steel reinforcement in concrete, replacing the traditional cut & bend and placing of steel TMT bars. We supply high quality WWM with precise dimensional control. The product will result considerable savings in time, labour and money. It is an Electric fusion welded prefabricated reinforcement consisting of a series of parallel longitudinal wires with accurate spacing welded to cross wires at the required spacing. This concept is a step forward in the mechanization of reinforcement laying. It is the easiest and correct solution for achieving the requirements of quality, reliability, speed and efficiency at construction site.

Advantages of Using Welded Wire Fabrics

1. Because bars are welded in a mat, the bars do not move when concrete is placed, insuring bars are in their proper position.
2. Since WWR is prefabricated and welded in plants, the risk of missing a bar is minimized.
3. The chance of improper bending of bars is reduced by using WWR since bending machines bend the mat as a single unit
4. The use of WWR minimized the chance of misplacement since only one type of mat is used on a given section.
5. Provide the exact size of reinforcement where needed through variable bar size and spacing, thereby reduces steel waste.
6. No site space needed for steel assembly.
7. Faster erection time means you can beat changing weather conditions.
8. Removes reinforcement placement from the critical path.
9. Less field labour needed.
10. The material fabrication is automated.
11. With faster construction, insurance premiums are reduced. For example on bridge deck construction the barrier walls can be constructed faster reducing the time for fall exposure and reducing insurance premium.
12. WWR can reduce construction time, thereby saving: Crane rental time Equipment leasing Increasing bonus
13. Lower material cost because not fabricating small bar.

Concrete ReinforcementStructural Slabs & WallsWWF instead of Individual Bars makes the job of reinforcing slabs/walls for residential, office and Institutional Buildings most quick and elegant. With detailing advantages, it also results in savings of 15 to 35%

Roads / PavementsLarge area Floor labs on ground, pavements, airports, runways, aprons etc to achieve crack-free joints less surfaces. Precast MembersPrecast elements which are thin or are difficult to reinforce such as curved arch flat members, Hyperbolic Paraboloid Shells, folded plate roof girders, fins, thin pardis or chajja drops.

Wire meshwirecloth can offerwide ranging characteristics dependent on the configuration of wire thickness in relation to aperture size, as well as type of weave, and can vary in texture from being as fine, soft and flexible as silk to being as rigid as steel plate. Many of the properties of wire cloth are not available using alternative metal media.