Product / Services
Post Buy Requirement
JC
Jekon Controls
Ahmedabad, Gujarat, India
Add Review
Call Now

Our Products

  1. Industrial Valves 11 Products available
  2. Valves & Valve Fittings 5 Products available
  3. Others 15 Products available

Other Products / Services #4687843

Angle Type Seat Valves

Angle Type Seat Valves
  • Size 1/2″ to 4″ Screwed / Flange
  • Media Air, Water, Oil, Gas, Steam & Chemical
  • Body ASTM A351 Gr. Cf8 / CF8M / CF3M
  • Steam Packing PTFE upto 180°C, Self-compensating (Spring Loaded)
  • Trim / Spindle Stainless Steel 304/316/316L
  • Seat Soft Seat (PTFE)
  • Gland Packing Teflon ‘V’ seals, backed by graphite wiper seal (Self Compensating)
  • Body Test Pressure 24 Bar Maximum
  • End Connections Female Screwed to BSP or NPT / Flange / Triclover
  • Working Fluid Press Refer to table
  • Leakage Drop tight / bubble tight, class IV ANSI B 16, 104, 1976
  • Operating Temp. On steam – Continues 155°C, Intermittent 180°C Maximum (High Temp. above 180°C – On Request)

Size Range : 1/2″ to 4″
Actuator
Body SS 304 Pressed
Cover Flange ASTM A351 Gr. Cf8 (SS 304) Investment Die-Cast
Spring Spring Steel (IS 4454 Gr. III)
Port Connection 1/4″ BSP (NPT on request)
Operating Pressure 3.5 to 7 Bar
Position Indicator Nylon
Operating Cycles 350 to 650 Cycles / Hr.
Media Dry Lubricated Air / Innert Gasses Asten Moisture Separators are advised to use in line
Technical Specification Table
Model Valve Size Orifice MM Inlet Position Max. Op. Press Low to Close Bar Max. Op. Press Low to Open Bar Flow Factor M3/hr Air Consumption Lit/Cycle
JYCV-15 1/2″ 16 N/C 16 16 4.2 0.155
JYCV-15 16 N/O 16 16 4.2 0.155
JYCV-20 3/4″ 16 N/C 16 16 5.5 0.155
JYCV-20 16 N/O 16 16 5.5 0.155
JYCV-25 1″ 23 N/C 16 16 13.5 0.161
JYCV-25 23 N/O 16 16 13.5 0.161
JYCV-40 1.1/2″ 34 N/C 15 15 31.9 0.172
JYCV-40 34 N/O 10 10 31.9 0.172
JYCV-50 2″ 45 N/C 14 16 54.5 0.184
JYCV-50 45 N/O 16 12 54.5 0.184
JYCV-65 2.1/2″ 62 N/C 14 16 54.5 0.184
JYCV-65 62 N/O 16 12 54.5 0.184
JYCV-80 3″ 75 N/C 10 10 105 0.735
JYCV-80 75 N/O 10 10 105 0.735
 
Dimensions
Valve Type Size M E PCD OD T
Inch mm
JYCV.S-15 1/2″ 15 72 130 60.3 88.94 11.1
JYCV.S-20 3/4″ 20 75 150 69.9 98.4 12.7
JYCV.S-25 1″ 25 90 160 79.4 107.4 14.3
JYCV.S-40 1-1/2″ 40 125 195 98.4 127 17.5
JYCV.S-50 2″ 50 152 230 120.6 152.4 19
JYCV.S-65 2.5″ 63 165 216 139.7 177.8 22.2
JYCV.S-80 3″ 80 170 242 152.4 190.5 23.8
JYCV.S-100 4″ 100 210 293 190.5 228.6 23.8
View Complete Details
Ask Latest Price & Details
Pneumatics Cylinder Operated Angle Seat Valves

Pneumatics Cylinder Operated Angle Seat Valves
  • Size 1/2″ TO 4″ (15MM TO 100MM)
  • Type NORMALLY CLOSE
  • Pressure UP TO 16BAR
  • Media AIR, WATER, OIL, GAS, STEAM, CHEMICAL, ETC
  • MODEL JCYV-S & JCYV-F
  • BODY CF8/CF8M
  • MOC S.S.304/S.S.316/ S.S.316L/WCB
  • SEAT PTFE
  • TEMPERATURE 250 C MAX
  • AIR PRESSURE 2 TO 7 BAR
  • ENDS SCREWED/FLANGED
View Complete Details
Ask Latest Price & Details
Pilot Operated Direct Acting Solenoid Valve

Pilot Operated Direct Acting Solenoid Valve
  • Port Size 1/2″ BSP / NPT
  • Body Material Aluminum / Brass / SS-304 / SS-316
  • Type 2 Port, 2 Posion (NC/NO)
  • Circumference Temperature -10 °C to 95 °C
  • Media Temperature -10 °C to 250 °C
  • Operating Voltage AC : 230V, 110V, 48V, 42V, 24V. DC : 12V, 24V
  • Power Consumption AC : 8W, 12W, 17W. DC : 8W
  • Media Air, Water, Gas, Light Oil, Vacuum Hot, Oil, Steam

Dimension (mm)
Model No. Port Size A B C D E
S.S.304 1/4″ 50 92 51 102 51
Aluminum 1/4″ 40 74 32 90 73
Brass 1/4″ 46 64 36 76 79
S.S.304 1/2″ 50 92 51 108 51
Brass 1/2″ 46 64 36 76 79
  Technical Data Sheet  
2/2 way pilot operated direct acting valve
MODEL NO. BODY  MATERIAL PIPE (INCH) ORIFICE (mm) Min. Operating Pressure kg/cm2 Max. Operating Pressure kg/cm2 Seal & Diaphragm Material Flow Factor Kv m3/hr
JDASV Aluminum 1/4″ 2 0 10 NBR 0.08
JDASV SS-304 1/4″ 4 0 15 NBR 0 .30
JDASV SS-304 1/4″ 2 0 150 NBR 0 .30
JDASV SS-304 1/4″ 3 0 10 NBR 0.36
JDASV SS-304 1/2″ 2 0 150 NBR 0 .40
JDASV SS-304 1/2″ 3 0 10 SILICON/NBR 3 .20
 
3/2 way pilot operated direct acting valve
JDASV Aluminum 1/4″ 2 0 10 NBR 0.08
JDASV SS-304 1/4″ 4 0 10 NBR 0 .30
JDASV SS-304 1/4″ 2 0 30 NBR 0 .30
JDASV SS-304 1/2″ 4 0 10 NBR 0.36
JDASV SS-304 1/2″ 4 0 40 NBR 0 .40
View Complete Details
Ask Latest Price & Details
Pneumatic Open Cylinder Control Valve

Pneumatic Open Cylinder Control Valve
  • Size DN15 to DN200
  • Application Steam, Thermic Oil, Water, Chemicals
  • Rating ASA 150#
  • Body Material C.I.IS 210 Gr FG 200/ASTM A216 Gr WCB/ ASTM A 351 Gr CF8/CF8M
  • Type 2 way, 3 way
  • Yoke SG Iron
  • Bonnet Standard Carbon Steel Fabricated. Extension Column & Radiation Fins for 3 way Valves
  • End Connections Flanged according to ASA 150#
  • Seat S.S.304/316 Screw in Type
  • Plug S.S.304/316/410 ‘V’ Port Characteristics/Teflon Filled
  • Shaft SS.304/316 screwed in the Actuator Stem
  • Sealing Type Metal-to-Metal Seal/Soft Seal
  • Packing Box Preformed Rings in Graphoil Packings/Teflon Rings Combinations of Both
  • Valve Normally closed. Normally open on request
  • Working Pressure 10Kg/cm²
  • Maximum Temperature 180°C for 2 way & 400°C for 3 way Valves
  • Testing & Inspection Standard
  • Seat Leak Test 12.5Kg/cm² for 150#
  • Body Hydraulic Test Pressure 20Kg/cm² for 150#
  • Valve Mounting Horizontal
  • Industries Textiles, Plastics, Dairy, Pharmaceuticals, Food-Processing Petrochemicals, Lamination, Leather, Etc.

VALVE : ACTUATOR  
Sr. No SPECIFICATIONS INFORMATIONS
1 Camber Materia Aluminum
2 Piston Spring Loaded Piston
3 Spring Spring Steel
4 Stem S.S.
5 Air Operation 50 PSI and above
   
MODEL Size F A A1 H H1 D I K R R1 N O
JDCV-F-1″ 1″ 185 90 145 345 345 108 11 79 51 1. 6 4 16
JDCV-F-1.5″ 1. 5″ 207 90 153 350 350 127 14 98 73 1. 6 4 16
JDCV-F-2″ 2″ 238 100 170 390 390 152 16 120 92 1. 6 4 19
JDCV-F-2.5″ 2  5″ 300 128 195 530 530 178 18 140 105 1. 6 4 19
JDCV-F-3″ 3″ 305 128 200 550 550 190 19 152 127 1. 6 4 19
JDCV-F-4″ 4″ 360 165 250 590 590 229 24 190 157 1. 6 8 19
View Complete Details
Ask Latest Price & Details
Stainless Steel Pressure Gauge

Stainless Steel Pressure Gauge
  • Brand Name JEKON
  • Model JPRG
  • Measuring Range 0 TO 10000KG/CM2
We are the leading manufacturers, exporters and supplier of this products.
View Complete Details
Ask Latest Price & Details
Dust Collector Solenoid Valve

Dust Collector Solenoid Valve
750 /Piece Get Latest Price
  • Media Air, Powder/Solids
  • Material Aluminium
  • Size 4 Inches,  1/2 to 2 Inches
  • Temperature Of Media Medium Temperature
  • Coil Voltage 12V
  • Pressure 0.6 to 10 Bar
  • Features Corrosion & abrasion resistant, Sturdy construction, Low maintenance, Durable finish standards
  • Brand Name Jekon
  • Series JDCV
  • Application Air & Dust
  • Control Direct-Operated, Pilot Operated
  • Automation Grade Automatic
  • Iso Volume ISO 9001;2015
  • Orifice 15mm
  • Seals P.U
  • Temp 80 deg C
  • Body Aluminium Die Cast
  • Diaphragm Neoprene/Nitrite/PU
  • Temperature 80° C Max.(up to 125° c on request)
  • Available Volt. All std.voltage available
View Complete Details
Ask Latest Price & Details
pneumatic actuator

Pneumatic Actuator
  • SIZE RANGE 1/2" TO 10"
We are leading manufacturer, exporter and supplier of Pneumatics Actuator Ball valve. The products we bring forward are engineered with exactitude by our skilled professionals who make sure to use finest grade metals and alloys in the manufacturing process. Also, we offer customization facility of the offered range at reasonable rates. Specifically designed to meet the diverse client needs, these ball valves are commended for their robustness, operational fluency and high corrosion resistance.The offered ball valve is intentionally designed with pneumatic actuator to relieve the operation of fluid handling in various chemical and waste water treatment plants. The offered ball valve is manufactured under BS 5153 standard and can be availed from us in cast iron, cast steel or stainless steel construction.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Harshad Chavda, Mr. Girish Patel (Jekon Controls)
  • No. 8, Shrinathji Estate, Saraspur Bridge Corner, Etavada Saraspur Bridge Corner, Etavada, Saraspur, Ahmedabad - 380018, Dist. Ahmedabad, Gujarat - 380001
  • Share us via
    Linkedin pinterest
View Contact No.
List of Other Products by Jekon Controls from Ahmedabad, Gujarat.
Product / Services
Post Buy Requirement
JC
Jekon Controls
Ahmedabad, Gujarat, India
Add Review
Call Now

Our Products

  1. Industrial Valves 11 Products available
  2. Valves & Valve Fittings 5 Products available
  3. Others 15 Products available

Other Products / Services #4687843

Angle Type Seat Valves

Angle Type Seat Valves
  • Size 1/2″ to 4″ Screwed / Flange
  • Media Air, Water, Oil, Gas, Steam & Chemical
  • Body ASTM A351 Gr. Cf8 / CF8M / CF3M
  • Steam Packing PTFE upto 180°C, Self-compensating (Spring Loaded)
  • Trim / Spindle Stainless Steel 304/316/316L
  • Seat Soft Seat (PTFE)
  • Gland Packing Teflon ‘V’ seals, backed by graphite wiper seal (Self Compensating)
  • Body Test Pressure 24 Bar Maximum
  • End Connections Female Screwed to BSP or NPT / Flange / Triclover
  • Working Fluid Press Refer to table
  • Leakage Drop tight / bubble tight, class IV ANSI B 16, 104, 1976
  • Operating Temp. On steam – Continues 155°C, Intermittent 180°C Maximum (High Temp. above 180°C – On Request)

Size Range : 1/2″ to 4″
Actuator
Body SS 304 Pressed
Cover Flange ASTM A351 Gr. Cf8 (SS 304) Investment Die-Cast
Spring Spring Steel (IS 4454 Gr. III)
Port Connection 1/4″ BSP (NPT on request)
Operating Pressure 3.5 to 7 Bar
Position Indicator Nylon
Operating Cycles 350 to 650 Cycles / Hr.
Media Dry Lubricated Air / Innert Gasses Asten Moisture Separators are advised to use in line
Technical Specification Table
Model Valve Size Orifice MM Inlet Position Max. Op. Press Low to Close Bar Max. Op. Press Low to Open Bar Flow Factor M3/hr Air Consumption Lit/Cycle
JYCV-15 1/2″ 16 N/C 16 16 4.2 0.155
JYCV-15 16 N/O 16 16 4.2 0.155
JYCV-20 3/4″ 16 N/C 16 16 5.5 0.155
JYCV-20 16 N/O 16 16 5.5 0.155
JYCV-25 1″ 23 N/C 16 16 13.5 0.161
JYCV-25 23 N/O 16 16 13.5 0.161
JYCV-40 1.1/2″ 34 N/C 15 15 31.9 0.172
JYCV-40 34 N/O 10 10 31.9 0.172
JYCV-50 2″ 45 N/C 14 16 54.5 0.184
JYCV-50 45 N/O 16 12 54.5 0.184
JYCV-65 2.1/2″ 62 N/C 14 16 54.5 0.184
JYCV-65 62 N/O 16 12 54.5 0.184
JYCV-80 3″ 75 N/C 10 10 105 0.735
JYCV-80 75 N/O 10 10 105 0.735
 
Dimensions
Valve Type Size M E PCD OD T
Inch mm
JYCV.S-15 1/2″ 15 72 130 60.3 88.94 11.1
JYCV.S-20 3/4″ 20 75 150 69.9 98.4 12.7
JYCV.S-25 1″ 25 90 160 79.4 107.4 14.3
JYCV.S-40 1-1/2″ 40 125 195 98.4 127 17.5
JYCV.S-50 2″ 50 152 230 120.6 152.4 19
JYCV.S-65 2.5″ 63 165 216 139.7 177.8 22.2
JYCV.S-80 3″ 80 170 242 152.4 190.5 23.8
JYCV.S-100 4″ 100 210 293 190.5 228.6 23.8
View Complete Details
Ask Latest Price & Details
Pneumatics Cylinder Operated Angle Seat Valves

Pneumatics Cylinder Operated Angle Seat Valves
  • Size 1/2″ TO 4″ (15MM TO 100MM)
  • Type NORMALLY CLOSE
  • Pressure UP TO 16BAR
  • Media AIR, WATER, OIL, GAS, STEAM, CHEMICAL, ETC
  • MODEL JCYV-S & JCYV-F
  • BODY CF8/CF8M
  • MOC S.S.304/S.S.316/ S.S.316L/WCB
  • SEAT PTFE
  • TEMPERATURE 250 C MAX
  • AIR PRESSURE 2 TO 7 BAR
  • ENDS SCREWED/FLANGED
View Complete Details
Ask Latest Price & Details
Pilot Operated Direct Acting Solenoid Valve

Pilot Operated Direct Acting Solenoid Valve
  • Port Size 1/2″ BSP / NPT
  • Body Material Aluminum / Brass / SS-304 / SS-316
  • Type 2 Port, 2 Posion (NC/NO)
  • Circumference Temperature -10 °C to 95 °C
  • Media Temperature -10 °C to 250 °C
  • Operating Voltage AC : 230V, 110V, 48V, 42V, 24V. DC : 12V, 24V
  • Power Consumption AC : 8W, 12W, 17W. DC : 8W
  • Media Air, Water, Gas, Light Oil, Vacuum Hot, Oil, Steam

Dimension (mm)
Model No. Port Size A B C D E
S.S.304 1/4″ 50 92 51 102 51
Aluminum 1/4″ 40 74 32 90 73
Brass 1/4″ 46 64 36 76 79
S.S.304 1/2″ 50 92 51 108 51
Brass 1/2″ 46 64 36 76 79
  Technical Data Sheet  
2/2 way pilot operated direct acting valve
MODEL NO. BODY  MATERIAL PIPE (INCH) ORIFICE (mm) Min. Operating Pressure kg/cm2 Max. Operating Pressure kg/cm2 Seal & Diaphragm Material Flow Factor Kv m3/hr
JDASV Aluminum 1/4″ 2 0 10 NBR 0.08
JDASV SS-304 1/4″ 4 0 15 NBR 0 .30
JDASV SS-304 1/4″ 2 0 150 NBR 0 .30
JDASV SS-304 1/4″ 3 0 10 NBR 0.36
JDASV SS-304 1/2″ 2 0 150 NBR 0 .40
JDASV SS-304 1/2″ 3 0 10 SILICON/NBR 3 .20
 
3/2 way pilot operated direct acting valve
JDASV Aluminum 1/4″ 2 0 10 NBR 0.08
JDASV SS-304 1/4″ 4 0 10 NBR 0 .30
JDASV SS-304 1/4″ 2 0 30 NBR 0 .30
JDASV SS-304 1/2″ 4 0 10 NBR 0.36
JDASV SS-304 1/2″ 4 0 40 NBR 0 .40
View Complete Details
Ask Latest Price & Details
Pneumatic Open Cylinder Control Valve

Pneumatic Open Cylinder Control Valve
  • Size DN15 to DN200
  • Application Steam, Thermic Oil, Water, Chemicals
  • Rating ASA 150#
  • Body Material C.I.IS 210 Gr FG 200/ASTM A216 Gr WCB/ ASTM A 351 Gr CF8/CF8M
  • Type 2 way, 3 way
  • Yoke SG Iron
  • Bonnet Standard Carbon Steel Fabricated. Extension Column & Radiation Fins for 3 way Valves
  • End Connections Flanged according to ASA 150#
  • Seat S.S.304/316 Screw in Type
  • Plug S.S.304/316/410 ‘V’ Port Characteristics/Teflon Filled
  • Shaft SS.304/316 screwed in the Actuator Stem
  • Sealing Type Metal-to-Metal Seal/Soft Seal
  • Packing Box Preformed Rings in Graphoil Packings/Teflon Rings Combinations of Both
  • Valve Normally closed. Normally open on request
  • Working Pressure 10Kg/cm²
  • Maximum Temperature 180°C for 2 way & 400°C for 3 way Valves
  • Testing & Inspection Standard
  • Seat Leak Test 12.5Kg/cm² for 150#
  • Body Hydraulic Test Pressure 20Kg/cm² for 150#
  • Valve Mounting Horizontal
  • Industries Textiles, Plastics, Dairy, Pharmaceuticals, Food-Processing Petrochemicals, Lamination, Leather, Etc.

VALVE : ACTUATOR  
Sr. No SPECIFICATIONS INFORMATIONS
1 Camber Materia Aluminum
2 Piston Spring Loaded Piston
3 Spring Spring Steel
4 Stem S.S.
5 Air Operation 50 PSI and above
   
MODEL Size F A A1 H H1 D I K R R1 N O
JDCV-F-1″ 1″ 185 90 145 345 345 108 11 79 51 1. 6 4 16
JDCV-F-1.5″ 1. 5″ 207 90 153 350 350 127 14 98 73 1. 6 4 16
JDCV-F-2″ 2″ 238 100 170 390 390 152 16 120 92 1. 6 4 19
JDCV-F-2.5″ 2  5″ 300 128 195 530 530 178 18 140 105 1. 6 4 19
JDCV-F-3″ 3″ 305 128 200 550 550 190 19 152 127 1. 6 4 19
JDCV-F-4″ 4″ 360 165 250 590 590 229 24 190 157 1. 6 8 19
View Complete Details
Ask Latest Price & Details
Stainless Steel Pressure Gauge

Stainless Steel Pressure Gauge
  • Brand Name JEKON
  • Model JPRG
  • Measuring Range 0 TO 10000KG/CM2
We are the leading manufacturers, exporters and supplier of this products.
View Complete Details
Ask Latest Price & Details
Dust Collector Solenoid Valve

Dust Collector Solenoid Valve
750 /Piece Get Latest Price
  • Media Air, Powder/Solids
  • Material Aluminium
  • Size 4 Inches,  1/2 to 2 Inches
  • Temperature Of Media Medium Temperature
  • Coil Voltage 12V
  • Pressure 0.6 to 10 Bar
  • Features Corrosion & abrasion resistant, Sturdy construction, Low maintenance, Durable finish standards
  • Brand Name Jekon
  • Series JDCV
  • Application Air & Dust
  • Control Direct-Operated, Pilot Operated
  • Automation Grade Automatic
  • Iso Volume ISO 9001;2015
  • Orifice 15mm
  • Seals P.U
  • Temp 80 deg C
  • Body Aluminium Die Cast
  • Diaphragm Neoprene/Nitrite/PU
  • Temperature 80° C Max.(up to 125° c on request)
  • Available Volt. All std.voltage available
View Complete Details
Ask Latest Price & Details
pneumatic actuator

Pneumatic Actuator
  • SIZE RANGE 1/2" TO 10"
We are leading manufacturer, exporter and supplier of Pneumatics Actuator Ball valve. The products we bring forward are engineered with exactitude by our skilled professionals who make sure to use finest grade metals and alloys in the manufacturing process. Also, we offer customization facility of the offered range at reasonable rates. Specifically designed to meet the diverse client needs, these ball valves are commended for their robustness, operational fluency and high corrosion resistance.The offered ball valve is intentionally designed with pneumatic actuator to relieve the operation of fluid handling in various chemical and waste water treatment plants. The offered ball valve is manufactured under BS 5153 standard and can be availed from us in cast iron, cast steel or stainless steel construction.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Harshad Chavda, Mr. Girish Patel (Jekon Controls)
  • No. 8, Shrinathji Estate, Saraspur Bridge Corner, Etavada Saraspur Bridge Corner, Etavada, Saraspur, Ahmedabad - 380018, Dist. Ahmedabad, Gujarat - 380001
  • Share us via
    Linkedin pinterest
View Contact No.