Our Products
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Additional Information:
Payment Terms : T/T
Delivery Time : 1 Week (Min.)
Comparison
Particulars | Jindal HDPE | PVC | GI |
---|---|---|---|
Life | > 50 years | < 50 years | < 10 years |
Maintenance | Virtually maintenance free | Being brittle in nature, requires frequent maintenance | Being corrosive in nature requires frequent maintenance |
Weight | Light weight, easy to handle and transport | Light in weight but brittle in nature may cause transportation problems. | Heavy. Difficult to handle / transport |
Installation | Very easy | Easy | Difficult and time consuming. |
Flexibility | Being flexible, can be coiled up to 110mm, helps in fast installation with less joints | Almost rigid, can be supplied only in maximum lengths of 6 meter. | Rigid. Supplied in lengths of 6 meters. |
Corrosion | NO corrosion | No corrosion | Highly corrosive |
Food Grade | HDPE is food grade | Not recommended | Not recommended |
Weathering | Highly resistant even in extreme weather conditions | Very Poor. Tends to break when exposed to sun | Very Poor. Tends to corrode. |
Temperature resistance | Very Good | Poor | Poor |
Chemical Resistance | Good Resistance to Acids & Alkalies | Comparatively Poor | Poor |
Soil Settlement | Adjust itself to soil settlement and can resist heavy load | Tends to crack in uneven soil conditions. | Can not adjust it to soil conditions. |
Impact Strength | Excelent | Poor | Moderate |
Joints | Leak proof joints | Poor adhesive joints may leak – needs replacement | Once corroded – tends to leak. Require frequent maintenance. |
Jindal MLC GAS Pipes combine the advantages of metal and plastic pipes and eliminate the disadvantages of both materials at the same time. The aluminium core is absolutely diffusion tight and reliably prevents oxygen or gases from permeating into the pipe. It compensates and reduces snap-back forces and heat expansion with changes in temperature. Jindal MLC Pipes consist of an overlapped aluminium core with an inner and outer layer of polyethylene - PE. All the layers are permanently bonded together by intermediate adhesive layers. The aluminium thickness of Jindal MLC pipes has been selected to meet compressive and flexural strength requirements.
Additional Information:
Payment Terms : T/T
Delivery Time : 1 Week (Min.)
Specifications
Size in | Size in | Class-1 | Class-2 | Class-3 | Class-4 | Class-5 | ||||
---|---|---|---|---|---|---|---|---|---|---|
2.5kgf/cm2 | 4.0kgf/cm2 | .0kgf/cm2 | 8.0kgf/cm2 | 10.0kgf/cm2 | ||||||
(Inches) | (M.M) | Pipes | Pipes | Socket | Socket | Socket | Pipes | Socket | Pipes | Socket |
1.1/4 | 40 | * | * | * | 1.600 | 0.025 | 2.250 | * | 2.800 | 0.040 |
1.1/3 | 50 | * | * | * | 2.500 | 0.045 | 3.300 | * | 4.000 | 0.060 |
2 | 63 | * | 2.500 | 0.050 | 4.000 | 0.070 | * | * | 6.000 | 0.105 |
2.1/3 | 75 | * | 3.500 | 0.080 | 5.000 | 0.110 | * | * | 8.500 | 0.170 |
3 | 90 | 3.550 | 5.500 | 0.140 | 7.500 | 0.200 | * | * | 12.000 | 0.305 |
4 | 110 | 5.200 | 7.500 | 0.230 | 11.000 | 0.350 | * | * | 18.000 | 0.520 |
4.1/2 | 125 | * | 9.800 | 0.306 | 14.000 | 0.450 | * | * | * | * |
5 | 140 | 8.200 | 12.500 | 0.456 | 17.000 | 0.680 | * | * | * | * |
6 | 160 | 10.900 | 17.000 | 0.658 | 22.000 | 0.950 | * | * | * | * |
7 | 180 | * | 20.300 | 0.853 | 27.000 | 1.260 | * | * | * | * |
8 | 200 | * | 25.000 | 1.188 | 37.000 | 1.700 | 48.000 | * | * | * |
9 | 225 | * | 33.500 | 1.758 | 47.000 | 2.440 | 63.000 | * | * | * |
10 | 250 | * | 37.500 | 2.107 | 58.200 | 3.270 | 78.000 | * | * | * |