Other Products / Services #483789

• World highest speed, 250pcs per Minute.


• Detachable hopperscontain a big quantity of materials and makes the easiest change sizes & colors.


• Any quality of rhinestonesare workable well without missing.


• Excellent design software supports all vector images from CorelDraw, Illustrator and etc.

amount of Steam to Boil a selected Pre-set level of Water contained within the Panel Section forming the Steam Chamber Walls.

The use of this Method creates a controllable uniform Steam Vapour at 102o Cent., which maintains the Steam Chamber Temperature Uniformity.

The Steam Chamber Humidity Factor, is simply controlled by the Operator by minutely adjusting the amount of Water contained within the Steam Chamber Walls to suit the required Humidity Level (after which the Water Level can then be Re-set for Repeatability).

Machine supplied as Optional Extra an Electrical Steam Super-heater System, complete with all necessary Valves and Electronic Switchgear arrangement to automatically control the required Set Temperatures of up to 190 Deg.
Cent.A Steam Exhaust system, suitably located at the lower section of the Steam Chamber Entry and Exit sections, automatically removes the excess Spent/Contaminated Steam.

The Standard Thermotex 3 Steam Ager/Polymerizers are supplied with Frontal Entry and a Rear Plaiter Delivery arrangement.

For Operational conveniences, a Combined Frontal Entry & Delivery arrangement can be supplied on request.

Comprising of a Rigidly Stayed fabricated Steel Up-right Framework, retaining a series of Fabric Guide/Support Rollers. Framework having been ready prepared for supporting 2 Opposing Faced Single Sided Suction Units, with each Suction Unit being complete with related Ducting and adjustable Blanking arrangement to suit the varying Fabric widths.

Precision Machined Stainless Steel Springs, for inserting into Rotary Printing Screens in order to maintain the Screens Circular Shape

Comprising of a Rigidly Fabricated 316 Quality Stainless Steel Immersion Tank, suitably retained on a Galvanized Steel Support Base Frame to a Working Height of 80 cm, complete with Stainless Steel Ball-valve Drain arrangement for the eventual Draining of the Degreasing Chemical.

The Electrical and Pneumatic Control Cabinet suitably connected to Printing Head Frame unit, housing all related Operational Switch-gear, together with Operator Control panel, all ready prepared for incoming Supply.

Mixer Lifting Units, retaining a Traveling Carriage Lift Mechanism, connected via a heavy duty Chain to a Pneumatic Cylinder for Raising/Lowering Mixer Unit into the selected operating position.

Roller Conveyor, T shaped Stainless Steel Unit for 2 In-line Mixers operation.

Tub Lifting/Tilting Unit, retaining a Traveling Carriage Lift Mechanism equipped with a Colour Tubs Supporting Platform running into a Tilt Guide Track.

Traveling Carriage connected to a Motor-Geared Drive Unit, enabling the Colour Tubs to accurately dispense the Colour Paste into the Vacuum Filtering Unit.

Colour Vacuum Filtering Unit, comprising of a Stainless Steel Vessel, retaining a Cone section with a Filter Screen Aperture for depositing the Colour Paste from the Tub Lifting Platform.

Vessel complete with a High Speed Vacuum Pump, interchangeable Filter Screen-mesh Elements and a heavy duty Door for access of the recipient Colour Tubs.

Colour Tub Auto-Washing Unit, Comprising of a Stainless Steel Wash Cabinet fitted with Nylon Bristled Brushes carried from a heavy duty Back Plate separating Wash Cabinet from Control Cubicle.

Brushes arranged to totally brush clean the internal and external of the Colour Tubs/Containers simultaneously, inclusive of Water Spray System, arranged for the internal/external spraying of the Colour Tubs.

Electrical Control Cabinetmounted on the Traveling Carriage Frame Unit, housing all the related Operational Switch-gear, inclusive of aElectrical Conductor Rail Systembeing supported on the Print Table Framework by applicable brackets, and ready prepared for Incoming Electrical Supply.

theScreen Retainer Bridges, being withheld by a pair of robustTension Bars, complete with mechanisms for controlling the ScreenHeight, LongitudinalandLateralMicro-Set movements.

Service side Screen RetainerBridge being adjustable, fitted with a Quick-releaseClamping Systemto accommodate the Varying Screen lengths, complete with Pneumatic controlled Screen Tensioning andScreen Liftmechanism.

Operator side Screen Retainer Bridge, equipped with Screen Drive engaging system, complete with remote auxiliaryOperatorcontrol panel for controlling the Electrical and Pneumatic parameters of the Machine.

Electro-Magnetic Beam, fitted with a series of Magnetic Coils and enclosed in a heavy duty Aluminum housing, Coils being fed withRectified Supplyfrom a Transformer having5 stepsControl.

Electrical Heated Under-blanket System

With the increase in the demand for Garments to be Printed with Plastisols and Rubber Print Pastes, an Electrical Heated Underblanket System is offered as Optional Extra for maintaining the Print Table Surface heated up to 65 Deg Cent., comprising of a special Wire Mesh for enclosing between the 2 Layers of Under-felt, complete with Auto-Transformer for Setting the desired Temperature.

The advantages of using the K+Z Printing Tables are due to the following :

2 Bowl Transporter/Squeeze Mangles (Nips), Each Squeeze Mangle (Nip) comprising of a pair of heavy duty rigidly stayed fabricated Steel uprights having been formatted to support the following:-

The Printed Fabric is guided with minimum tension through the Machine Entry system into the Steam Chamber and formed into hanging Loops of programmed length over Loop Carrier Rollers by a Loop Formation Frame.

The Loop Carrier Rollers, which are retained within a pair of endless Transport Chains, and are covered with Insulating material to prevent moisture formation and slippage of the Fabric, move the Fabric Loops through the Steam Chamber.

At every step of the endless Transport Chains movement, the Loop Rollers rotate via a Rack & Pinion system, to continually advance the Fabric on the Loop Rollers, thus ensuring the Fabric uniformity of conditioning by allowing the total Fabric to pass through all the exact same Steaming Conditions within the Steam Chamber.

The Machine Pre-set Running Speed, will automatically control the Duration Time of the Fabric passing within the Steam Chamber, which is then continuously being delivered to the Fabric Plaiter section via the Exit Roller arrangement at the rear section of the Steam Chamber.

Comprising of a "Free Standing" cubicle, housing all of the necessary Switch-gear and related Electrical Instrumentation required for Operating the Steamer/Polymerizer Unit.

The controlling parameters of the Machine having been simplified and/or automated to enable the Operator to simply Set the Controls to obtain Repeatability and constant monitoring.

The Standard Steamer/Polymerizers are supplied with Frontal Entry and a Rear Plaiter Delivery arrangement.

For Operational conveniences, a Combined Frontal Entry & Delivery arrangement can be supplied on request, however it is advisable to note that these Combined Frontal Entry & Delivery are more suitable for Woven Fabrics, due to increase in the Fabric tension.

The Temperature and Humidity Factors on the Machine are simply achieved via a Steam Flow Input Control System, equally delivering a selected Pre-set amount of Steam to boil a selected Pre-set level of Water contained within each Panel Section forming the Steam Chamber Walls.

The use of this method, creates a controllable uniform Steam Vapour at 102o Cent., which maintains the Steam Chamber Uniformity of Temperature.

The Steam Chamber Humidity Factor, (constantly being monitored by a Humidity Metering system), is simply controlled by the Operator by minutely adjusting the amount of Water contained within the Steam Chamber Walls via the Water Level Control Unit, to suit the required Humidity Level (after which the Water Level can then be Re-set for Repeatability).

The use of this method of Boiling the Water inside the Walls of the Steam Chamber Panels, allows the Input Steam which boils the water to Condense back into water again, therefore using the Input Steam to Generate the required Humidity Level without the need for External non-purified water.

The Air/Steam medium is heated through a series of Thermal Oil Heat Exchangers, which are suitably located within the Polymerizing Chamber to maximize the Temperature equilibrium, and is then delivered through the Ducting system via a series of purposely designed Circulating Fans to ensure the even distribution of the medium within the Polymerizing Chamber.

The incorporated Temperature Control system, automatically adjusts the Thermal Oil flow to the Heat Exchangers to the Pre-set desired Temperature necessary for the Fabric being treated (Maximum 190o Cent.).

A Steam Exhaust system, suitably located at the lower section of the Steam Chamber, automatically removes the excess Spent/Contaminated Air/Steam medium.

arrangement for selecting required Storage Tank, Including Manifold Side Valve for Washing-Off, or Re-circulating/Filtering of the Gum/Thickener whilst Mixing.

Gum/Thickener 2-ton capacity Storage Tanks, manufactured in heavy duty stainless steel, complete with Inspection Covers and Maximum Level sensors for auto-stopping the Pump Station when selected Storage Tank is Full.

Gum/Thickener Dispensing System, comprising of a series of Pneumatic actuated Diaphragm Pumps for Feeding the Gum/Thickener to the Dispensing Station at the Colour Preparation Mixing Point.

Dispensing Station, comprising of a stainless steel Stand retaining a series of (Auto, or Manual) Valves, for dispensing Gum/Thickener Paste at point of requirement to avoid unnecessary Manual transportation.

TheRaising/Loweringof the Screens onto the Rollers.

AThrusting Arrangementenabling a Perpendicular motion of the InternalWater Spray Pipewhilst Screen is rotating.

TheWash Tank, supported by a stainless Cabinet, retaining a Motor-geared unit for theRoller Drivearrangement.Control Cabinet, housing all of the necessary Pneumatic and Electrical Controls, ready prepared for incoming Supply.

Electrics:380 Volts, 3 Phase, 50 HZ

Pneumatics:10 mm, 3 Bar Pressure.

Water:12 mm ( in.) Household Pressure.