Our Products #1372551

Wire springs have tendency to break under high pressure and also have permanent set in short time. PU can sustain very high loads than rubber. Unlike rubber it does not take part in weathering or chemical actions under normal condition.

JINI Acquired complete knowledge for the manufacturing of prepolymer which make it possible to make tailor made product depending on application demand.

Prepolymer grades such as PTMEG / PPG/polyester can be manufacture as per the requirement which make it possible to offer various formulations , grades as per hardness from 30 shore A to 75 Shore D.

In house testing facilities like chemical & physical , make it possible to have a complete quality control at various stages of manufacturing prepolymer.

Polyurethane Lining is known for abrasion & tear resistance hence it replaces many general purpose rubber & plastic lining. Because of these unique properties PU lining is being used in slurry handling equipments.

Many process control valve required critical process parameters hence polyurethane lining is the only solution for end use application.

Polyurethane pads are used mainly where there is stripping, forming, embossing application. It also helps in making utensils. In this material thinning is less comparatively to conventional forming.

Polyurethane mats are used mainly where there is stripping, forming, embossing application. It also helps in making utensils. In this material thinning is less comparatively to conventional forming.

Polyurethane is new wonder material, which has superior properties, and plays a vital role in todays industrial scenario, which combines strength of plastic and elasticity of rubber. Wire springs have tendency to break under high pressure and also have permanent set in short time.

Life of the seal depends mainly on the seal material. The correct material is essential if a seal is to be effective, reliable and long lasting. Seal material plays a vital role in seal application. While selecting a seal for different profiles major care is taken to ensure that the seal material works well for that application. There are many factors taken into consideration that the material should fulfill, basically its properties like Tensile Strength, Elongation and Modulus, Wear and Abrasion Resistance, Resilience, Environmental resistance to Alkalis and Solvents

Jini Polymech is engaged in manufacturing standard and tailor made seals for mainly for water leakage application, pneumatic sealing applications. Following are the seals successfully manufactured by Jini Polymech on regular basis:

Wheels and rollers keep the wheels of industry moving. As anticipated polyurethane is driving force behind many industrial applications because of its superior and mind blowing properties.

Polyurethane is used for castors and rollers because of exceptional abrasion resistance, load bearing capacity, high impact resistance, strong bonding with metals as well as plastic materials, non effect of weathering conditions.

Polyurethane pads and mats are used mainly where there is stripping, forming, embossing application. It also helps in making utensils. In this material thinning is less comparatively to conventional forming.

Applications:

• Metal forming dies (as cast)
• Shock absorbers
• Shock absorbers
• Scraper blades
• Piercing
• Embossing
• Bulging
• Drawing

Polyurethane is new wonder material, which has superior properties, and plays a vital role in todays industrial scenario, which combines strength of plastic and elasticity of rubber. Wire springs have tendency to break under high pressure and also have permanent set in short time. PU can sustain very high loads than rubber. Unlike rubber it does not take part in weathering or chemical actions under normal condition.

Applications:

• Sheet metal dies
• Piercing
• Embossing
• EBulging / Drawing
• Anti Vibration Mountings

Wheels

Wheels and rollers keep the wheels of industry moving. As anticipated polyurethane is driving force behind many industrial applications because of its superior and mind blowing properties. Polyurethane is used for castors and rollers because of exceptional abrasion resistance, load bearing capacity, high impact resistance, strong bonding with metals as well as plastic materials, non effect of weathering conditions. Jini Polymech is engaged in manufacturing castors, conveyor rollers, pinch rolers, metal bonded rollers, solid tyres, sports wheels, load wheels.