Features and Specifications

• Manufactured from tough engineering plastic
• Non corrosive & resistant to chemicals
• UV resistant fittings

Application

Feasible for thick wall thickness all Dripline tubes for following specifications:

Features and Specifications

• An assembly of micro tube of required length and micro tube holding stake.
• Tubing manufactured from virgin polyethylene, with yellow line.
• Resistant to ultra violet (UV) radiation and other environmental effects.
• Snap proof design, tubing is prevented from snapping off even at higher pressures.
• Designed to hold the dripper at a fixed position.
• The flow is dispersed to avoid soil erosion due to jetting.
• Smooth inner surface minimises frictional losses.
• Can be used at low operating pressure.
• Can be supplied in required length of tubing.

Applications

• Used as a linear flow dripper in drip systems.
• Recommended to use with low pressure / gravity fed system like drum kit, bucket kit, gravity kit etc.
• Suitable to use for irrigation of bag culture.

Features and Specifications

• Manufactured from tough engineering plastic
• Non corrosive & resistant to chemicals
• UV resistant fittings

Application

Used to connect thin wall thickness tubes as per following specifications

Features and Specifications

• Manufactured from tough engineering plastic
• Non corrosive & resistant to chemicals
• UV resistant fittings

Application

Feasible for thick wall thickness Polytubes (plain Lateral / Jain Tough Hose) as well as Dripline tubes for following specifications

Pumping water without use of electricity especially in hilly areas. The Hydraulic Ram uses the force of flowing water to pump water uphill to desired point without using any additional source of energy. What you need is only suitable site location for Hydraulic Ram Pump.

With a Hydraulic Ram and a suitable stream, spring or artesian well nearby, you can supply your homesteads water needs, irrigate your garden or water your orchard.all without the use of any outside source of energy with Jain DripKit.

Key Features

• Very simple construction and easy to install.
• Does not consume petrol, diesel or electricity.
• Can be operated for 24 hours per day.
• Automatic, continuous operation requires no supervision or human input.
• Maintenance free.

A revolution is taking place in how water is being pumped in remote locations beyond the reach of electric power lines. Solar power has proven to be an ideal way to lift water for drinking, sanitation, stock tanks, and irrigation.

Solar Photovoltaic (PV) panel is one of the the simplest possible way to generate electricity beyond the reach of power lines. It has no moving parts and last for decades with virtually no maintenance. Solar power is no longer an expensive, experimental energy source.

Jain Irrigation Systems Ltd. offers an effective solution: Jain Solar Powered Drip irrigation system especially designed for farmers, who do not have access to conventional power and has small land holding. The solar pumps have Brushless DC motors which receives power from the PV panels. This system does not have any batteries. Hence the solar pumps start early in the morning & continue to work till late evening.

Key Features

• Jain solar pumps are available in surface & submersible types.
• One can optionally use solar trackers, with which the discharge can increase by around 20 to 25%
• Solar energy is available in abundance. It is the most reliable source of energy.
• Solar powered pump will give freedom from the power cuts and load shedding.
• Cost of conventional energy is high and it is becoming dearer.
• No manpower required to operate the system. System starts automatically with the first ray of sun and shuts off when sun sets.
• No power and /or fuel cost to operate pump/drip system.

Features and Specifications

• Manufactured from virgin plastic for stable performance.
• Turbulent flow path with wide cross sectional area makes the dripper clog resistant.
• Openable dripper - easy to clean.
• Extended outlet facilitates use of polyethelyne extension tube or vinyl tube.
• Narrow cross shaped inlet acts as a filter.
• UV stabilised. No environmental effects.
• Coloured cap facilitates easy identification of flow rate.
• Manufacturing coefficient of variation, CVm 3%, ensures high field emission uniformity (EU).
• Required punch diameter 2.9 mm.
• Minimum filtration requirement - 100 micron.

Applications

Recommended for fruit crops, orchards, vegetables, sugarcane, cotton, etc.

Features and Specifications

• Rugged construction, made of virgin plastic material.
• Adjustable discharge according to the water requirements and growth stages.
• Total shut-off possible.
• Nominal operating pressure 1 kg/cm(14.22 psi)but discharge can be adjusted even at low pressures.
• Unique design prevents blockage of dripper in desert conditions.
• Available in 0 to 100 lph (0 to 26.45 gph) discharge.
• Can be supplied in black color
• Required punch diameter 2.9mm.

Applications

• Suitable for trees having high water requirement.
• Recommended for sandy soils / desert conditions.

Features and Specifications

• Ray jet for orchard, vineyard and landscape irrigation.
• Static, low maintenance jet.
• High clogging resistance.
• Diverse distribution patterns and wetted diameters.
• Easy to open and clean.
• Unique nozzle structure forms turbulent flow and wide water pathways even at low flow rates, for high clogging resistance.
• Large number of nozzle and spreader combinations provides wide selection of flow rates and distribution patterns.
• Flow rates: 16 - 110 lph.
• Filtration requirements,
• Black, orange and blue nozzles: 130 microns.
• Violet, green and red nozzles: 200 microns.
• Operating pressures: 1.0 - 3.5 kg/cm (14.22 - 49.77 psi).

Applications

Recommended for irrigation of wide spread root zone crops.

Features and Specifications

• Compact Double Union (DU) design.
• Manufactured from high performance rigid PVC compound.
• Designed for added safety. Accidental loosening of the ball is prevented.
• Excellent chemical & corrosion resistance.
• Low frictional losses
• Chemical resistant nitrile rubber-O-rings ensures leak proof operation for longer period.
• Easy to install and dismantle.
• Solvent weld, BSP threaded or flanged options.
• Available in two seat ring options - economical HDPE seat ring for low pressure applications or leak resistance teflon (PTFE) seat ring for high pressure applications.
• Available in 20 to 90 mm ( to 3) sizes.

Application

Used for flow control in irrigation & water supply lines.

Features and Specifications

• Manufactured from stable engineering plastic.
• Simple construction with no moving parts, minimises maintenance.
• Designed for misty spray. Gives very fine droplets.
• Coloured nozzles for various flow rates.
• Easy to disassemble & clean.
• Recommended operating pressure 3.0 kg/cm (42.66 psi).

Available in following inlet options:

• 4 mm barbed inlet.
• 5/32 (4mm) 10-28 UNS screwed inlet.
• Push fit type inlet.

Minimum filtration requirement 75 micron.

Easy to install with different mounting options

For Fogger with barbed inlet-

• Can be mounted directly on polytube or 6 mm OD extension tube or vinyl tube.

For Fogger with 5/32 (4mm) 10-28 UNS screwed inlet-

• Clip Stake for J-Jets / Foggers / Misters (Code: DCSJ) with rigid riser of suitable length.
• Stake for Modular / J-Jets / Foggers / Misters (Code : DSJF4 / DSJF8)
• Square stake for J-Jets / Foggers / Misters (Code : DSSJ)

For Fogger with push fit inlet -

Can be mounted directly on polytube or 6 mm OD extension tube or vinyl tube.

Fogger assembly options available on demand.

Applications

• Recommended for orchards and green/glass houses requiring fine mist spray for temperature and humidity control.
• Suitable for crops require to maintain micro climate in the canopy area.

Features and Specifications

• Ultra Fine Droplet Size 3 Micro & Adjustable Flow Rate Start from 1.3 lph
• Fully adjustable droplet size (from 3 microns up to 120microns).
• Fogger flow rate can be simply varied at any time by regulating the water and/or air pressure.
• Significant Energy Saving
• Maximum efficiency at Air and Liquid low pressure operating conditions.
• Low maintenance.
• Minimum compressed air flow rate consumption.
• No Risk of Clogging
• TURBO FOG is available in three large sized nozzles, i.e. 0.8 mm, 1.0 mm and 1.2 mm not suseptible to clogging.
• No need of special filters, RO system and /or decalcification water treatment.
• Atomising Spray Homogeneity
• Patented air-water mixing technology makes uniform droplet size distribution.
• 8m long atomising spray distance (adjustable according to air/water ratio)
• Easy Installation
• Easy to install fittingsfor air and water line connection
• TURBO FOG nozzle connection to any air and liquid flexible and/or rigid feeding pipes via clamps, direct connection, micro-tube etc.
• TURBO FOG Nozzle Manufactured in Polymers
• Long service life.
• Resistant to any chemical or sun-ray attack.
• No abrasion or wear

Applications

• GreenhouseThe TURBO FOG system has been successfully deployed for the last 15 years in multiple greenhouse installations, various crops, greenhouse types, nurseries, propagation houses etc.
• FarmingPig farms, Cattle farms, Rabbit farms, Poultry farms etc
• IndustryThe climate control project design of an industry will depend on a number of variables such as:Industry sector and activity, Manufacturing process, Exterior climate conditions, Interior heat added by machines and employees, Air changes required within the industry activity.
• Leisure & ResidentialThe TURBO FOG technology deployed in the Leisure and Residential sectors will bring new customers and boost sales by increasing the comfort and well-being of customers. The fully micronized and evaporated mist (no wetting) created in the environment generates a unique microclimate in the area where installed. The typical installations where the TURBO FOG system is being deployed and is adding the most value are:
• The typical installations where the TURBO FOG system is being deployed and is adding the most value are:
• Private Residential: private houses with terraces and gardens, patio, social clubs, Spas etc.

Features and Specifications

• Manufactured from virgin plastic for stable performance.
• Turbulent flow-path with wide cross sectional area makes the dripper clog resistant.
• Openable dripper - easy to clean.
• Narrow cross shaped inlet acts as a filter.
• Colored cap facilitates easy identification of flow rate.
• UV stablised. No environmental effects.
• Reliable performance, manufacturing Coefficient of Variation, CV3%.
• Required punch size 2.9mm.
• Minimum filtration requirement - 100 micron.

Applications

• Recommended for orchards, vegetables, fruit crops and floricultural plants on flat terrain or on moderate slopes.
• Recommended to use in problematic water condition where opening and cleaning of the emitter is needed.

Features and Specifications

• Manufactured from virgin plastic for stable performance and longer life.
• Injection Module Silicone rubber diaphragm ensures consistent performance for longer period.
• Narrow cross shaped inlet acts as a filter for emitter.
• Openable dripper - easy to clean.
• Self cleaning design ensures flushing at start up, shut down & during operation.
• Wide pressure compensating range 1- 3 kg/cm (14.22 - 42.66 psi) allows longer length of laterals.
• Manufacturing coefficient of variation, CVm < 5% ensure high field emission uniformity.
• Coloured cap facilitates easy identification of flow rate.
• UV stabilized.
• No environmental effects.
• Optional Anti-bug cap- prevents entrance of ants/bugs into the dripper.
• Required punch diameter 2.9 mm.
• Minimum filtration requirement - 100 micron.

Applications

• Recommended for orchards, fruit crops, vegetables, nurseries & flowers.
• Recommended to use where section size is large and longer length of run is required.
• Recommended for undulating terrain & steep slopes.

Features and Specifications

• Manufactured from high quality polymers to achieve wear resistance and longer trouble free performance.
• Stream jet pattern covers wide area.
• Precision moulding ensures uniform distribution.
• Available in five spray pattern and five colour coded nozzle sizes to make it suitable for variable field conditions.
• Lower maintenance, no moving parts/ seals to wear out.
• Wide surface water distribution provides advantages in areas where soil composition has poor lateral movement.
• Low spray profile minimizes water on foliage.
• Nominal operating pressure 1 kg/cm (14.22 psi).
• Easy to install with different mounting options like,
• Clip Stake for J-Jets / Foggers / Misters (Code: DCSJ) with rigid riser.
• Stake for Modular / J-Jets / Foggers / Misters (Code: DSJF4 / DSJF8).
• Square stake for J-Jets / Foggers / Misters (Code: DSSJ)
• Mini Spray Jet stake assembly including micro jet, 6 mm OD extension tubing (0.5 m or 1.0 m long) and take off available on demand.
• Minimum filtration requirement - 100 micron.

Applications

• Useful for irrigation of orchards, nurseries, vineyards, green houses.
• Suitable for irrigation of plants having widespread root zone.
• Useful to maintain adequate micro environment in the canopy area.

Features and Specifications

• Manufactured with UV & sunlight resistant, chemical resistant, non corrosive plastic material for stable performance.
• One piece, factory sealed emitter
• Wide pressure compensating range of 0.6 to 4 kg/cm (8.5 to 56.88 psi)
• Precision moulded liquid silicone rubber diaphragm ensures pressure compensation, uniform water application and long lasting high quality performance.
• Unique self cleaning design, flow path expands in case of blockages. Thus flushes off trapped dirt. This reduces the risk of clogging and minimizes maintenance cost drastically.
• Coefficient of manufacturing variance less than 5%.
• Inlet has large barb for maximum retention on hose, even under sustained high operating temperatures and pressures.
• Barbed outlet for connection of extension tube 3.2mm ID (1/8" ID).

Available in four colour coded models :

• Brown - 2 lph (0.5 gph)
• Gray - 3 lph (0.75 gph)
• Black - 4 lph (1 gph)
• Green - 8 lph (2 gph)

Compact, lateral can be easily recoiled even when the emitters are installed on it.

Minimum 100 micron filtration required. Type of filtration and its precision can be decided by quality of source water

Required punch size 3.9 mm.

Applications

• Recommended for orchards, vineyards, sugarcane, vegetables, cotton, nurseries, greenhouses, etc.
• Recommended to use where longer length of lateral is required or on undulating terrain.

We have set-up the most modern and integrated dehydration facility in the midst of a large onion and vegetables growing area. We supply high quality seed to our growers and get onions and vegetables grown on contract. These are harvested at the peak of maturity, flavor and taste and quickly transported to our processing facility. Manual harvesting enables the growers to supply clean and high quality produce demanded by Farm Fresh.These raw materials undergo quality inspection, careful sorting & dehydration ensuring maximum retention of flavour, aroma, colour & taste. Dehydrated flakes are then carefully milled into different fractions on our State-of-the-art milling facility ensuring strictest sanitation, food safety and hygienic conditions. During milling, the products undergo metal-detection at the last stage and are then packed in bag-in-box. These are then stored under lower temperature and humidity and are supplied to the customers throughout the world. Elaborate marking, labeling and recording systems have been evolved to ensure complete traceability. Our dehydration facility is the most modern and integrated facility in the world and has been accredited with ISO 9001 & HACCP certification from RWTUV, Germany.

Features and Specifications

• Prevents drainage through emitters
• High and low opening and closing pressure
• Keeps system filled with water under pressure, enabling immediate start-up
• Allows all units to start-up or shut-down simultaneously
• Modular-fits all NaanDan Jain micro-sprinklers
• Tapered or bayonet connection (bayonet available only with black low-pressure LPD)
• Minimal pressure loss, even with high flow rates
• One-stage opening-Super LPD is either completely opened or completely closed
• Easily dismantled for cleaning and maintenance
• PE and PVC connections
• Black: Low-pressure Super LPD for micro-sprinklers
• Green: Medium-pressure Super LPD for foggers
• Blue: High-pressure Super LPD for foggers

• An extruded, seamless tube with drippers permanently fixed inside.
• Manufactured from special grade virgin plastic using state of- the art technology that guarantees the best results.
• Computerised continuous online quality test ensures reliable quality and consistent performance.
• Marked with two parallel yellow stripes Twin- Line. Symbol of quality. It also helps to ensure upright positioning of the dripper.
• Large cross-sectional, hydraulically designed turbulent flowpath that makes it a clog resistant emitting pipe.
• Inbuilt filters prevents physical impurities entering in to the dripper.
• Excellent CVm, manufacturers coefficient of variation, ensures best field emission uniformity.
• Precision laser drilled outlet holes.
• Best environmental stress crack resistant. Ensures long trouble free life under strigent atmospheric conditions
• Easy to roll back & re-lay.
• Minimum 100 micron filtration recommended.
• Available in four discharge rates of 0.8, 1.3, 1.6, 2.4 and 4.0 lph at 1 kg/cm pressure as per metric standard.( 0.21, 0.34, 0.42, 0.63 and 1.06 gph at 14.2 psi as per US standard.)
• Available in standard dripper spacing 20, 30, 40, 50, 60, 75 and 90 cm. Other spacing and group spacings are available on demand.
• J-Turbo Aqura is available in 12, 16, 17, 19, 20 and 23 mm nominal diameter as per metric standard. Also available in ", " and 1" nominal diameter as per US standard.
• Specially designed fittings are available. Please refer to Poly Fitting & Accessories page.

• Precision pressure-compensated, dripline
• Cascade labyrinth gives strong, self-cleaning turbulence.
• Available in -
• PC Basic Pressure Compensation - Orange
• PCAS Pressure Compensator Anti Siphon - Blue
• PCNL Pressure Compensator non Leakage - Red
• Aerodynamic dripper design ensures continuous flushing of sediments and small dirt particles.
• Weir structure protects against root intrusion and sand suction.
• Dimensional inlet filter improves clog resistance against Problematic water condition
• Low CVm for maximal uniformity results.
• High quality injection moulding silicone diaphragm.
• Flow rates: 1.0, 1.6, 2.0 & 3.6 l/h.
• PCNL Opening pressure - 1.0 kg/cm
• Closing pressure - 0.25 kg/cm
• Pressure regulating range - PC model - 0.5 - 4.0 kg/cm (7.11-56.88 psi)
• Recommended filtration level - 130 micron.
• Available in 16mm nominal diameter. Other sizes such as 17, 20 and 23 mm OD can be supplied on demand.
• Available in dripper spacing from 15-100 cm.

Applications

• All purpose versatile product.
• Pulse irrigation for greenhouse, vegetables and orchards.(PCNL)
• Suitable for surface as well as subsurface applications.(PCAS)
• Large fields with long rows (reduced filling time).

Features and Specifications

• Manufactured from special grade virginplastic material
• Use of stateoftheart technology ensures close dimensional tolerance and longer life.
• Resistant to UV radiation & environmental effects.
• Cylindrical dripper with an inbuilt silicone diaphragm ensures consistent performance for longer time.
• Online stringent quality checks at every stage.
• Especially suitable for undulating terrain and steep slopes.
• Wide pressure compensation range.
• Self cleaning, diaphragm retracts dynamically to throw away particles which are blocking the emitter.
• Specially designed emitting pipe fittings are available. Please refer to Polyfittings & Accessories pages.
• Available in nominal OD of 16mm, 20mm
• Minimum 100 micron filtration recommended.
• Available in standard dripper spacing 20, 30, 40, 50, 60, 75 & 90 cm. Other spacings available on demand.
• On request Turboline PC can also be supplied in group spacing.
• On demand, available with rodent deterrent feature.

Applications

• Ideal for irrigation of closely spaced row crops like sugarcane, cotton, banana, strawberry, floriculture, vegetables and spices.
• Suitable for surface as well as subsurface irrigation.
• Recommended for undulating terrain & steep slopes and where longer lateral running length is necessary.

Features and Specifications

• The new & innovative pressure-compensated, non-drainage dripline based on the cascade labyrinth.
• Cascade labyrinth gives strong, self-cleaning turbulence.
• Non-drainage and anti-vacuum design.
• Aerodynamic dripper design ensures continuous flushing of sediments and small dirt particles.
• Weir structure protects against root intrusion and sand suction.
• Side water inlet structure to improve clog resistance.
• Low CVm for maximal uniformity results.
• High quality diaphragm.
• Flow rates: 1.0 & 1.6 l/h.
• Pressure regulating range - PC model - 0.4-2.5kg/cm (7.11-56.88 psi)
• Recommended filtration level - 130 micron.
• Available in 16mm nominal diameter. Other sizes such as 17, 20 and 23 mm OD can be supplied on demand.
• Available in dripper spacing from 15-100 cm.

Applications

• All purpose versatile product.
• Pulse irrigation for greenhouse, vegetables and orchards.
• Suitable for surface as well as subsurface applications.
• Large fields with long rows (reduced filling time).

Features and Specifications

• Rugged reinforced plastic construction.
• Protects valves from damage due to lawn mowers, other garden equipments and vandalism.
• Provides convenient access to valves installed below ground level.
• Robust top cover with non slippery grips.
• Leaf green colour of the cover matches to surrounding lawn/turf.
• Heavy duty extended bottom keeps the valve box stable and firmly set in the soil.
• Special heavy duty model available.
• Available in circular and rectangular models.

Application

Valve guard in Turf / Landscaping and in micro irrigation systems.

• Black in color with two parallel yellow strips - "TwinLine". Also available in red stripes for rodent deterrent option.
• Manufactured from virgin LLDPE using advanced extrusion technology.
• Excellent characteristics of LLDPE provide durable tubing with close dimensional tolerances.
• UV stabilized.
• No environmental effects.
• Smooth inner surface minimizes frictional losses.
• Pre-punched tubing at specified distance and hole size can be supplied on demand (standard hole size is 2.9 mm).
• On demand, can be supplied with rodent deterrent feature.
• Manufactured as per IS / ISO/ ASAE / AS / ASTM standards.
• Each batch is tested for the following parameters:
• Dimensional tolerances.
• Short term & long term hydraulic pressure.
• Heat reversion.
• Carbon black content.
• Environmental stress crack resistance (ESCR).
• Tensile Strength and Elongation.

Features and Specifications

• Black in color with two parallel yellow strips - "TwinLine". Also available in red stripes for rodent deterrent option.
• Manufactured from virgin LLDPE using advanced extrusion technology.
• Excellent characteristics of LLDPE provide durable tubing with close dimensional tolerances.
• UV stabilized.
• No environmental effects.
• Smooth inner surface minimizes frictional losses.
• Pre-punched tubing at specified distance and hole size can be supplied on demand (standard hole size is 2.9 mm).
• On demand, can be supplied with rodent deterrent feature.
• Manufactured as per IS / ISO/ ASAE / AS / ASTM standards.
• Each batch is tested for the following parameters:
• Dimensional tolerances.
• Short term & long term hydraulic pressure.
• Heat reversion.
• Carbon black content.
• Environmental stress crack resistance (ESCR).
• Tensile Strength and Elongation.

Applications

• Used as laterals in drip irrigation system.
• Used in greenhouses for high pressure foggers, sprayheads and jets application.

Features and Specifications

• Innovative Filter Design Compact design, economical since no extra fittings required for the connection of Jain Sand Separator to Disc filter
• Standard Pure Polyester / Epoxy coating for Protecting from Corrosion Coated with more than 70 micron thick deep blue colored pure Polyester powder on outer surface & Epoxy coating from inner side for protection against corrosion and weather effects
• Various connection options available Threaded connection, Flanged connection or Easy Fix connection available
• Additional Pressure Check Assembly To check pressure from inlet side & outlet side additional pressure check assembly provided.
• Draining facility available Drain valve available for draining dirt particles from filter
• Equipped with Patended Jain Sand Separator Innovative hydrodynamic patented design used in Spin Clean Filter.
• Mild steel construction for Sand separator and special plastic alloy material for Disc filter
• Specially equipped Jain Sand Separator with disc filter for efficient filtration. It also helps to prolong cleaning of disc element.
• Removes fine sand and silt particles of size higher than 75 microns.
• Maximum operating pressure 10 kg/cm (142 psi).
• Can also be supplied in stainless steel as a special order.
• Can be supplied in multiple batteries option.
• Can also be supplied with fully automatic option.

Applications

Used in micro irrigation systems to remove sand and silt particles from irrigation water.

Features and Specifications

• Innovative Compact Filter Design To install filter in smaller area, filter is compacted without reducing performance
• Unique Smart Clean Element Unique SmartClean element, assures high performance and effective filtration. (Flow direction Out to In)
• Easy for Maintenance Strong and smooth opening, driptight SS clamp closure.
• Various Connection Options Available Threaded connection, Flanged connection or Easy Fix connection available
• Draining Facility Available Additional Drain Valve provided to remove dirt from filter
• Equipped with Pressure Check Assembly To check pressure from inlet side and outlet side, additional Pressure check assembly provided
• Manufactured from special plastic alloy material which gives very high stiffness, toughness, heat and impact resistance.
• Excellent chemical and weather resistance.
• Ribbed body construction, designed to withstand water hammer and surges in the pipe line.
• Maximum operating pressure 6 kg/cm (85.2 psi).
• Available in standard filtration of 100 micron. (Other mesh sizes are available On demand)
• Available in 2" (20 & 25 m/hr), 2 " (30 & 40 m/hr) and 3" (50 m/hr) inlet & outlet connection sizes.
• On demand, Jain Super Flow Plus can also be supplied with automatic flushing arrangement.

Applications

Used for water filtration of drip & landscape irrigation system.

Features and Specifications

• Radially Convergent Grooved Discs Disclean element with strong, precision engineered and radially grooved disc to provide fine three dimensional filtration. (Flow direction Out to In).
• Easy for Maintenance Strong and smooth opening, driptight SS clamp closure.
• Angular or Straight Outlet Option Available Optional two outlet positions facilitates installation in angular or straight fashion
• Equipped with Pressure Check Assembly To check pressure from inlet side and outlet side, additional Pressure check assembly provided.
• Various Connection Options Available Threades connection, Flanged connection or Easy Fix connection available
• Draining Facility Available Additional Drain Valve provided to remove dirt from filter
• Manufactured from special plastic alloy material which gives very high stiffness, toughness, heat and impact resistance.
• Excellent chemical and weather resistance.
• Ribbed body construction, designed to withstand water hammer and surges in the pipe line.
• Maximum operating pressure 6 kg/cm (85.2 psi).
• Available in standard filtration 130 micron. (Other mesh sizes are available On demand)
• Available in 2" (20 & 25 m/hr), 2 " (30 m/hr) and 3"(40 & 50 m3/hr) inlet & outlet connection sizes.
• On demand, Disclean PL can also be supplied with automatic flushing arrangement.

Applications

Used for water filtration of drip & landscape irrigation system

Suitable to use where precision filtration is required like reclaimed water application.

Features and Specifications

• Radially Convergent Grooved Discs Disclean element with strong, precision engineered and radially grooved disc to provide fine three dimensional filtration. (Flow direction Out to In)
• Standard Epoxy Coating for Protection from Corrosion Coated with more than 70 micron thick light blue coloured epoxy powder from both inside and outside surface for protection against corrosion and weather effects
• Various Connection Options Available Threaded connection, Flanged connection or Easy Fix connection available
• Separate Draining Facility Available Large volume of dirt collection chamber with drain valve for Hydrocyclone filter and separate drain valve for Disc Filter
• Special Rubber Cone Special rubber cone is provided at the bottom of the cone of Hydrocyclone filter to prevent wearing
• Equipped with Pressure Check Assembly To check pressure from inlet side and outlet side, additional Pressure check assembly provided
• Mild steel construction.
• Dirt can be easily flushed out through dirt collection chamber.
• Available in maximum operating pressure of 6 kg/cm (142 psi).
• Can also be supplied in stainless steel as a special order.
• Can be supplied in higher flow capacities in multiple batteries option.

Applications

Used in micro irrigation systems to remove sand and silt particles from irrigation water.

Features and Specifications

• Radially Convergent Grooved Discs Disclean element with strong, precision engineered and radially grooved disc to provide fine three dimensional filtration. (Flow direction Out to In)
• Special Filter Design Tangential inlet protects the screen from direct impact of sharp/angular particles
• Easy for Maintenance Strong and smooth opening and closing for cleaning disc element
• Standard Epoxy Coating for Protection from Corrosion Coated with more than 70 micron thick light blue coloured epoxy powder from both inside and outside surface for protection against corrosion and weather effects
• Various Connection Options Available Threaded connection, Flanged connection or Easy Fix connection available
• Draining Facility Available Drain valve position on upper & lower sides of the body provides installation flexibility
• Mild steel construction.
• Disc element construction allows easy cleaning under flowing water
• Available in standard mesh of 100 micron size. (other mesh sizes available On demand).
• Flow direction from outside of the filtering element to inside. (Out to In)
• Maximum operating pressure 6 kg/cm (142 psi).
• On demand, Disclean ML can also be supplied with automatic flushing option.
• Disclean ML filter can also be supplied with stainless steel body.

Applications

Prevents irrigation system clogging from physical contaminants.system.

Features and Specifications

• Various Options Available Available in Manual, Semi Automatic and Fully Automatic option.
• Specially Designed Valves Equipped with high performance, durable valves, which can provide consistent performance over the years.
• Equipped with Screen Filter For manifold used in Clean Master Single Unit with special provision of screen filter ensures backwash through clean water.
• Various Connection Options Available Threaded connection, Flanged connection or Easy Fix connection available
• Fabricated with galvanised / Coated pipe in various combination to assemble single or multiple unit of CleanMaster, Filtro Master and header assemblies. Light weight and cost effective plastic manifold and chemical resistant Stainless Steel manifold are available on demand.
• Standard range of manifolds includes sizes compatible with CleanMaster & FiltroMaster (single and multiple units). Other sizes can be supplied on demand.
• Standard header assemblies of 2", 2", 3" sizes are available. Other sizes or combinations can be supplied on demand.

Fabricated with galvanised / Coated pipe in various combination to assemble single or multiple unit of Clean Master, Filtro Master and header assemblies. Light weight and cost effective plastic manifold and chemical resistant Stainless Steel manifold are available on demand.

Features and Specifications

• Uniformly graded, angular sand particles for high filtration
• efficiency.
• Purity of silica 98.8%.
• Particle size range 1 mm to 2 mm (0.039 to 0.078 inch),
• passes through 10 mesh and retained on 18 mesh.
• Uniformity coefficient 1.5.
• Available in 30 kg packing.

Applications

Used as media in various media filters for water filtration

Features and Specifications

• Standard Pure Polyester / Epoxy coating for Protecting from Corrosion Coated with more than 70 micron thick deep blue colored pure Polyester powder on outer surface & Epoxy coating from inner side for protection against corrosion and weather effects
• Innovative Turbulent Inlet Turbulent inlet ensures thorough mixing of chemicals and / or fertilizers
• Additional fine filter To avoid entry of solid particles in system, Special provision of strainer on the outlet side
• Separate Draining facility available Special Drain port given to flush the tank
• Mild steel construction.
• Separate valves are provided on the inlet & outlet to control the injection rate.
• High pressure hose assembly inlet / outlet connection.
• Wide 8 opening for easy pouring of stock solution.
• Maximum working pressure 10 kg/cm (142 psi).
• Available in 30, 60, 90, 120 & 160 liter (8, 16, 24, 32 & 42 US gallon) capacity.
• Can also be supplied in stainless steel material

Applications

Fertilizer and chemical injection through drip and sprinkler irrigation systems.

Features and Specifications

• Innovative Venturi design Innovative design of convergent, throat and divergent sections of Venturi for more injection rate
• Additional Valve Provided Additional Valve provided for suction side to prevent reverse flow of water
• Additional Fine Suction Filter To avoid entry of solid particles in system, additional suction filter is provided
• Various Option Available Venturies are available from ", 1", 1", 1", 2"
• Made of engineering plastic.
• Excellent chemical resistance to most of the chemicals.
• Highly efficient and compact differential pressure injection device.
• Economical and low cost option
• Available in ", 1", 1", 1" and 2" BSP inlet / outlet connection. Any other size can be supplied on demand.

Applications

Fertilizer and chemical injection through drip and sprinkler irrigation systems

Features and Specifications

• Innovative Compact design Innovative compact design which operated without electricity
• Accurate and Proportional Injection Rate For accurate injection, special adjusting lock arrangement provided
• Additional Fine Suction Filter To avoid entry of solid particles in system, additional suction filter is provided
• Different options available ON/OFF Knob OR Air Release option available
• Made of strong plastic material with high chemical resistance.
• Choice of selection on the basis of desired proportions,
• Adjustable from 0.3% to 2%.
• Adjustable from 0.4% to 4%.
• Fixed dosage 6%.
• Available in two models to provide operational flexibility,
• With on/off system.
• With Air Release Valve.
• Maximum operating pressure 5 kg/cm (70 psi). High pressure model (6 kg/cm) available on demand.
• Simple to install, operate and maintain.
• Low pressure loss.
• " BSP inlet / outlet connection.
• Dosing flow range,
• 0.6 to 50 lph for 0.3% to 2% adjustable.
• 0.12 to 100 lph for 0.4% to 4% adjustable.
• 150 lph for 6% fixed dosage.

Applications

Recommended to use where precise application of fertilizer and other agricultural chemicals are require.

Features and Specifications

• Heavy Duty, High Quality, Light Weight Tank Manufactured from Heavy Duty, High Quality Plastic Fertilizer Tank with optimum weight
• Innovative Turbulent Inlet Turbulent inlet ensures thorough mixing of chemicals and / or fertilizers.
• Additional Fine Filter To avoid entry of solid particles in system, Special provision of strainer on the outlet
• Separate Draining Facility Available Special Drain port given to flush the tank
• Separate valves are provided on the inlet & outlet to control the injection rate.
• High pressure hose assembly inlet / outlet connection.
• Maximum working pressure 6 kg/cm.
• Available in 30, 60 & 90 liter (8, 16 & 24 gallon) capacity.

Applications

Fertilizer and chemical injection through drip and sprinkler irrigation systems.

Features and Specifications

• Chemical-resistant high-grade plastic material for precision, durability and flow-rate reliability .
• The dripper design integrates three elements to minimize clogging.
• Protected cross-shaped water inlet.
• Flushing mechanism of regulating diaphragm.
• Strong turbulent flow in labyrinth with continual cleaning and flushing.
• Large water passages.
• Two models are available: PC and PC CNL (anti-drainage).
• Colour-coded for identification of discharge and model

PC+ CNL: Grey housing

• PC: Green housing
• 1.3 lph: Grey cover
• 2.0 lph: Brown cover
• 3.0 lph: Blue cover
• 4.0 lph: Black cover
• 8.0 lph: Green cover
• 12.0 lph: Red cover
• Standard 5 mm extension for connection of extenstion tube.
• Wide and precise regulating range from 0.5 to 4.0 kg/cm (7.11 to 56.88 psi).
• Nominal discharge: 1.3, 2.0, 3.0, 4.0, 8.0, 12.0 lph.
• CVm: less than 4%.

Prevents low head drainage (CNL model).

• Opening pressure: 8.0 m
• Closing pressure: 3.0 m
• Maximum lateral Length (m) on flat ground.
• Precise irrigation in soilless culture growing conditions and pulse irrigation.
• Can be used for subsurface installation.
• On demand Click Tif-HD can also be supplied with anti-bug cap option for protection against bugs.
• On demand Click Tif-HD can also be supplied with barbed outlet option.
• Required punch size 2.5 mm (code ITC).
• Minimum filtration requirement - 100 micron.

Applications

• For orchards and vineyards, greenhouses, nurseries and landscape applications.
• For areas with harsh topographical conditions.
• Irrigation of pot-plants with single, two, four or multiple outlets.

The New Jain Jet offers the latest in precision molding technology ensuring it is the best micro jet on the market! Newly redesigned, the Jain Jet has the cleanest and sharpest patterns in the industry to help ensure that each plant receives the right amount of water at the right time. The Jain Jet offers the widest range of flow rate and distribution patterns in the industry to be able to meet all your design and application needs.

Features and Specifications

• Static, no moving parts
• 7 color coded nozzles for easy identification of flow rate.
• 18 different wetting patterns to chose from for optimum wetted diameter
• Precision molding ensures precise spray patterns
• Manufactured from the highest quality materials for long term field operations
• Fast and easy installation quick thread technology
• Low maintenance
• Easy clog detection
• Top Hat available to use with young trees for reduced radius and higher application rates in root zones
• Flow rates: 4.4 to 29.4 gph
• Working Pressure: 10 to 30 psi
• Wetted Diameter: 7 to 34 feet
• Filter Requirement: 120 mesh

Applications

• Orchards: Almonds, Walnuts, Stone-Fruit, and citrus
• Vineyards
• Organic or convential fields

Features and Specifications

• The double purpose emitter for misting & irrigation over propagation benches.
• Uniform coverage.
• Ideal droplet size prevents drift of excessively fine mist.
• Coloured nozzles for various flow rates.
• No dripping during operation.
• Undisturbed and symmetrical water distribution (no deflection or dead corners).
• Can be fitted with Leakage Prevention Device (LPD) for perfect pulsed operation.

Applications

• Height of units above bench: 1.0 - 1.2 m.
• Maximum spacing between units on lateral: 1.0 m.
• Maximum spacing between laterals: 1.0 m.
• Maximum distance of lateral from bench edge: 0.2 m

Features and Specifications

• Chemical resistant raw materials.
• The optimal solution for cooling, humidifying and pesticide spraying in greenhouses.
• Very small droplets (average of 90 microns) for minimal foliage wetting ( pulsed operation).
• Two nozzle fogger with built-in Leakage Prevention Device.
• Precision engineering to give fine droplets (average 90 microns).
• Economical.
• Excellent Coverage.
• Easy to install and service.
• Different connection options suitable for PE and PVC pipe.
• Discharge - 13 lph ( 2 x 6.5 lph outlets ).
• Operating pressure: 4.0 kg/cm (56.88 psi).
• Recommended spacing:
• For cooling and humidifying only:
• 2.0 to 3.0 m between Foggers.
• For cooling, humidifying and spraying :
• 2.0 to 3.0 m between laterals.
• 1.5 m between Foggers.
• Minimum filtration requirement 75 micron.

Features and Specifications

• Manufactured from high quality polymers.
• Holds the PE tube firmly at required position. Avoids dispositioning of PE tube.
• Distributes water evenly.
• Used with micro tube of 1.0 mm (0.036") ID, 1.3 mm (0.05") ID, 3.3 mm (0.13") OD and 1.5 mm (0.06") ID.
• Recommended operating pressure of 0.5 kg/cm2(7psi)for 1.00mm(0.036")ID tubing and 0.35 kg/cm2(5 psi)for 1.3mm(0.05")and 1.5 mm(0.06")ID tubing and for 60cm(24")length of tubing.
• Easy to Install & Monitor.

Applications

• Ideally used for irrigation in bag culture.
• Recommended to use where dispositioning of tubing is a problem.

Features and Specifications

• Turbulent flow path resist clogging.
• Strong ribbed stake allows exact positioning of the dripper.
• Can be used with 6mm OD extension tube or vinyl tube.
• Easy to install.
• Colour of the dripper represents flow and facilitates easy identification.
• On demand can supply assembly including dripper attached with required length of extension tube and take off.
• Minimum filtration requirement - 100 micron.

Applications

Suitable for pot irrigation, nurseries, glass/green houses, vegetables, home gardens.

Features and Specifications

• light weight for easier & economical installation
• Manufactured from high performance rigid uPVC / Nylon of compound
• Precise flow control possible
• Low frictional losses
• Excellent chemical & corrosion resistance
• Maximum operating pressure 10 kg/cm (142 psi)
• Available in 50, 63, 75 & 90 mm (1", 2", 2" & 3") connection sizes.

Application

Suitable for flow control in irrigation & water supply lines.

Features and Specifications

• Manufactured with UV & sunlight resistant, chemical resistant, non corrosive plastic material for stable performance.
• Colour coded nozzle for different flow rates.
• Uniform coverage.
• Fine misty spray.
• Easy to install and service.
• Wide flow range, 17-71 lph (4.5 - 18.8 gph) at operating pressure of 1 kg/cm (14.22 psi).
• 10-24 buttress triple lead fast thread inlet.
• Can be supplied with Leakage Prevention Device (LPD) for pulsed operation and to prevent low head drainage.
• On demand, Acu-Mister can be supplied as an assembly.
• Minimum filtration requirement - 100 micron.

Applications

• Ideal for plant propagation.
• Recommended for climate control in Greenhouse / Shade house.

Features and Specifications

• Molded Adaptor Molded Adaptor at Top of Stake to hold Jet
• Sharp end Sparp end at bottom for easy insertion in field
• Tube specifications.

Application

Used with Mini Sprinkler (Suitable Vinyl Tube)

Features and Specifications

• Manufactured from tough engineering plastic
• Non corrosive & resistant to chemicals
• UV resistant fittings

Application

Used to connect thin wall thickness tubes as per following specifications

Features and Specifications

• Single Barb Design Single barb fitting used for connecting one or more outlets from one dripper / emitter
• Special Connector for Multi Outlet Connection Special one piece connector designed for Green House and Poly House
• Used in Polyhouse / Greenhouse and Nurseries (Suitable Vinyl tubes)

Application

Used in Open field Polyhouse / Greenhouse and Nurseries on JSCPC Plus, Click tif, J-Turbo key Plus emitters (Suitable Polytubes / Jain Tough Hose)

Features and Specifications

• Manufactured from tough engineering plastic
• Non corrosive & resistant to chemicals
• UV resistant fittings

Application

Used to connect thin wall thickness tubes as per following specifications

Features and Specifications

• Manufactured from tough engineering plastic
• Non corrosive & resistant to chemicals
• UV resistant fittings

Application

Feasible for thick wall thickness all Dripline tubes for following specifications:

Features and Specifications

• An assembly of micro tube of required length and micro tube holding stake.
• Tubing manufactured from virgin polyethylene, with yellow line.
• Resistant to ultra violet (UV) radiation and other environmental effects.
• Snap proof design, tubing is prevented from snapping off even at higher pressures.
• Designed to hold the dripper at a fixed position.
• The flow is dispersed to avoid soil erosion due to jetting.
• Smooth inner surface minimises frictional losses.
• Can be used at low operating pressure.
• Can be supplied in required length of tubing.

Applications

• Used as a linear flow dripper in drip systems.
• Recommended to use with low pressure / gravity fed system like drum kit, bucket kit, gravity kit etc.
• Suitable to use for irrigation of bag culture.

Features and Specifications

• Manufactured from tough engineering plastic
• Non corrosive & resistant to chemicals
• UV resistant fittings

Application

Used to connect thin wall thickness tubes as per following specifications

Features and Specifications

• Manufactured from tough engineering plastic
• Non corrosive & resistant to chemicals
• UV resistant fittings

Application

Feasible for thick wall thickness Polytubes (plain Lateral / Jain Tough Hose) as well as Dripline tubes for following specifications

Pumping water without use of electricity especially in hilly areas. The Hydraulic Ram uses the force of flowing water to pump water uphill to desired point without using any additional source of energy. What you need is only suitable site location for Hydraulic Ram Pump.

With a Hydraulic Ram and a suitable stream, spring or artesian well nearby, you can supply your homesteads water needs, irrigate your garden or water your orchard.all without the use of any outside source of energy with Jain DripKit.

Key Features

• Very simple construction and easy to install.
• Does not consume petrol, diesel or electricity.
• Can be operated for 24 hours per day.
• Automatic, continuous operation requires no supervision or human input.
• Maintenance free.

A revolution is taking place in how water is being pumped in remote locations beyond the reach of electric power lines. Solar power has proven to be an ideal way to lift water for drinking, sanitation, stock tanks, and irrigation.

Solar Photovoltaic (PV) panel is one of the the simplest possible way to generate electricity beyond the reach of power lines. It has no moving parts and last for decades with virtually no maintenance. Solar power is no longer an expensive, experimental energy source.

Jain Irrigation Systems Ltd. offers an effective solution: Jain Solar Powered Drip irrigation system especially designed for farmers, who do not have access to conventional power and has small land holding. The solar pumps have Brushless DC motors which receives power from the PV panels. This system does not have any batteries. Hence the solar pumps start early in the morning & continue to work till late evening.

Key Features

• Jain solar pumps are available in surface & submersible types.
• One can optionally use solar trackers, with which the discharge can increase by around 20 to 25%
• Solar energy is available in abundance. It is the most reliable source of energy.
• Solar powered pump will give freedom from the power cuts and load shedding.
• Cost of conventional energy is high and it is becoming dearer.
• No manpower required to operate the system. System starts automatically with the first ray of sun and shuts off when sun sets.
• No power and /or fuel cost to operate pump/drip system.

Features and Specifications

• Manufactured from virgin plastic for stable performance.
• Turbulent flow path with wide cross sectional area makes the dripper clog resistant.
• Openable dripper - easy to clean.
• Extended outlet facilitates use of polyethelyne extension tube or vinyl tube.
• Narrow cross shaped inlet acts as a filter.
• UV stabilised. No environmental effects.
• Coloured cap facilitates easy identification of flow rate.
• Manufacturing coefficient of variation, CVm 3%, ensures high field emission uniformity (EU).
• Required punch diameter 2.9 mm.
• Minimum filtration requirement - 100 micron.

Applications

Recommended for fruit crops, orchards, vegetables, sugarcane, cotton, etc.

Features and Specifications

• Rugged construction, made of virgin plastic material.
• Adjustable discharge according to the water requirements and growth stages.
• Total shut-off possible.
• Nominal operating pressure 1 kg/cm(14.22 psi)but discharge can be adjusted even at low pressures.
• Unique design prevents blockage of dripper in desert conditions.
• Available in 0 to 100 lph (0 to 26.45 gph) discharge.
• Can be supplied in black color
• Required punch diameter 2.9mm.

Applications

• Suitable for trees having high water requirement.
• Recommended for sandy soils / desert conditions.

Features and Specifications

• Ray jet for orchard, vineyard and landscape irrigation.
• Static, low maintenance jet.
• High clogging resistance.
• Diverse distribution patterns and wetted diameters.
• Easy to open and clean.
• Unique nozzle structure forms turbulent flow and wide water pathways even at low flow rates, for high clogging resistance.
• Large number of nozzle and spreader combinations provides wide selection of flow rates and distribution patterns.
• Flow rates: 16 - 110 lph.
• Filtration requirements,
• Black, orange and blue nozzles: 130 microns.
• Violet, green and red nozzles: 200 microns.
• Operating pressures: 1.0 - 3.5 kg/cm (14.22 - 49.77 psi).

Applications

Recommended for irrigation of wide spread root zone crops.

Features and Specifications

• Compact Double Union (DU) design.
• Manufactured from high performance rigid PVC compound.
• Designed for added safety. Accidental loosening of the ball is prevented.
• Excellent chemical & corrosion resistance.
• Low frictional losses
• Chemical resistant nitrile rubber-O-rings ensures leak proof operation for longer period.
• Easy to install and dismantle.
• Solvent weld, BSP threaded or flanged options.
• Available in two seat ring options - economical HDPE seat ring for low pressure applications or leak resistance teflon (PTFE) seat ring for high pressure applications.
• Available in 20 to 90 mm ( to 3) sizes.

Application

Used for flow control in irrigation & water supply lines.

Features and Specifications

• Manufactured from stable engineering plastic.
• Simple construction with no moving parts, minimises maintenance.
• Designed for misty spray. Gives very fine droplets.
• Coloured nozzles for various flow rates.
• Easy to disassemble & clean.
• Recommended operating pressure 3.0 kg/cm (42.66 psi).

Available in following inlet options:

• 4 mm barbed inlet.
• 5/32 (4mm) 10-28 UNS screwed inlet.
• Push fit type inlet.

Minimum filtration requirement 75 micron.

Easy to install with different mounting options

For Fogger with barbed inlet-

• Can be mounted directly on polytube or 6 mm OD extension tube or vinyl tube.

For Fogger with 5/32 (4mm) 10-28 UNS screwed inlet-

• Clip Stake for J-Jets / Foggers / Misters (Code: DCSJ) with rigid riser of suitable length.
• Stake for Modular / J-Jets / Foggers / Misters (Code : DSJF4 / DSJF8)
• Square stake for J-Jets / Foggers / Misters (Code : DSSJ)

For Fogger with push fit inlet -

Can be mounted directly on polytube or 6 mm OD extension tube or vinyl tube.

Fogger assembly options available on demand.

Applications

• Recommended for orchards and green/glass houses requiring fine mist spray for temperature and humidity control.
• Suitable for crops require to maintain micro climate in the canopy area.

Features and Specifications

• Ultra Fine Droplet Size 3 Micro & Adjustable Flow Rate Start from 1.3 lph
• Fully adjustable droplet size (from 3 microns up to 120microns).
• Fogger flow rate can be simply varied at any time by regulating the water and/or air pressure.
• Significant Energy Saving
• Maximum efficiency at Air and Liquid low pressure operating conditions.
• Low maintenance.
• Minimum compressed air flow rate consumption.
• No Risk of Clogging
• TURBO FOG is available in three large sized nozzles, i.e. 0.8 mm, 1.0 mm and 1.2 mm not suseptible to clogging.
• No need of special filters, RO system and /or decalcification water treatment.
• Atomising Spray Homogeneity
• Patented air-water mixing technology makes uniform droplet size distribution.
• 8m long atomising spray distance (adjustable according to air/water ratio)
• Easy Installation
• Easy to install fittingsfor air and water line connection
• TURBO FOG nozzle connection to any air and liquid flexible and/or rigid feeding pipes via clamps, direct connection, micro-tube etc.
• TURBO FOG Nozzle Manufactured in Polymers
• Long service life.
• Resistant to any chemical or sun-ray attack.
• No abrasion or wear

Applications

• GreenhouseThe TURBO FOG system has been successfully deployed for the last 15 years in multiple greenhouse installations, various crops, greenhouse types, nurseries, propagation houses etc.
• FarmingPig farms, Cattle farms, Rabbit farms, Poultry farms etc
• IndustryThe climate control project design of an industry will depend on a number of variables such as:Industry sector and activity, Manufacturing process, Exterior climate conditions, Interior heat added by machines and employees, Air changes required within the industry activity.
• Leisure & ResidentialThe TURBO FOG technology deployed in the Leisure and Residential sectors will bring new customers and boost sales by increasing the comfort and well-being of customers. The fully micronized and evaporated mist (no wetting) created in the environment generates a unique microclimate in the area where installed. The typical installations where the TURBO FOG system is being deployed and is adding the most value are:
• The typical installations where the TURBO FOG system is being deployed and is adding the most value are:
• Private Residential: private houses with terraces and gardens, patio, social clubs, Spas etc.

Features and Specifications

• Manufactured from virgin plastic for stable performance.
• Turbulent flow-path with wide cross sectional area makes the dripper clog resistant.
• Openable dripper - easy to clean.
• Narrow cross shaped inlet acts as a filter.
• Colored cap facilitates easy identification of flow rate.
• UV stablised. No environmental effects.
• Reliable performance, manufacturing Coefficient of Variation, CV3%.
• Required punch size 2.9mm.
• Minimum filtration requirement - 100 micron.

Applications

• Recommended for orchards, vegetables, fruit crops and floricultural plants on flat terrain or on moderate slopes.
• Recommended to use in problematic water condition where opening and cleaning of the emitter is needed.

Features and Specifications

• Manufactured from virgin plastic for stable performance and longer life.
• Injection Module Silicone rubber diaphragm ensures consistent performance for longer period.
• Narrow cross shaped inlet acts as a filter for emitter.
• Openable dripper - easy to clean.
• Self cleaning design ensures flushing at start up, shut down & during operation.
• Wide pressure compensating range 1- 3 kg/cm (14.22 - 42.66 psi) allows longer length of laterals.
• Manufacturing coefficient of variation, CVm < 5% ensure high field emission uniformity.
• Coloured cap facilitates easy identification of flow rate.
• UV stabilized.
• No environmental effects.
• Optional Anti-bug cap- prevents entrance of ants/bugs into the dripper.
• Required punch diameter 2.9 mm.
• Minimum filtration requirement - 100 micron.

Applications

• Recommended for orchards, fruit crops, vegetables, nurseries & flowers.
• Recommended to use where section size is large and longer length of run is required.
• Recommended for undulating terrain & steep slopes.

Features and Specifications

• Manufactured from high quality polymers to achieve wear resistance and longer trouble free performance.
• Stream jet pattern covers wide area.
• Precision moulding ensures uniform distribution.
• Available in five spray pattern and five colour coded nozzle sizes to make it suitable for variable field conditions.
• Lower maintenance, no moving parts/ seals to wear out.
• Wide surface water distribution provides advantages in areas where soil composition has poor lateral movement.
• Low spray profile minimizes water on foliage.
• Nominal operating pressure 1 kg/cm (14.22 psi).
• Easy to install with different mounting options like,
• Clip Stake for J-Jets / Foggers / Misters (Code: DCSJ) with rigid riser.
• Stake for Modular / J-Jets / Foggers / Misters (Code: DSJF4 / DSJF8).
• Square stake for J-Jets / Foggers / Misters (Code: DSSJ)
• Mini Spray Jet stake assembly including micro jet, 6 mm OD extension tubing (0.5 m or 1.0 m long) and take off available on demand.
• Minimum filtration requirement - 100 micron.

Applications

• Useful for irrigation of orchards, nurseries, vineyards, green houses.
• Suitable for irrigation of plants having widespread root zone.
• Useful to maintain adequate micro environment in the canopy area.

Features and Specifications

• Manufactured with UV & sunlight resistant, chemical resistant, non corrosive plastic material for stable performance.
• One piece, factory sealed emitter
• Wide pressure compensating range of 0.6 to 4 kg/cm (8.5 to 56.88 psi)
• Precision moulded liquid silicone rubber diaphragm ensures pressure compensation, uniform water application and long lasting high quality performance.
• Unique self cleaning design, flow path expands in case of blockages. Thus flushes off trapped dirt. This reduces the risk of clogging and minimizes maintenance cost drastically.
• Coefficient of manufacturing variance less than 5%.
• Inlet has large barb for maximum retention on hose, even under sustained high operating temperatures and pressures.
• Barbed outlet for connection of extension tube 3.2mm ID (1/8" ID).

Available in four colour coded models :

• Brown - 2 lph (0.5 gph)
• Gray - 3 lph (0.75 gph)
• Black - 4 lph (1 gph)
• Green - 8 lph (2 gph)

Compact, lateral can be easily recoiled even when the emitters are installed on it.

Minimum 100 micron filtration required. Type of filtration and its precision can be decided by quality of source water

Required punch size 3.9 mm.

Applications

• Recommended for orchards, vineyards, sugarcane, vegetables, cotton, nurseries, greenhouses, etc.
• Recommended to use where longer length of lateral is required or on undulating terrain.

We have set-up the most modern and integrated dehydration facility in the midst of a large onion and vegetables growing area. We supply high quality seed to our growers and get onions and vegetables grown on contract. These are harvested at the peak of maturity, flavor and taste and quickly transported to our processing facility. Manual harvesting enables the growers to supply clean and high quality produce demanded by Farm Fresh.These raw materials undergo quality inspection, careful sorting & dehydration ensuring maximum retention of flavour, aroma, colour & taste. Dehydrated flakes are then carefully milled into different fractions on our State-of-the-art milling facility ensuring strictest sanitation, food safety and hygienic conditions. During milling, the products undergo metal-detection at the last stage and are then packed in bag-in-box. These are then stored under lower temperature and humidity and are supplied to the customers throughout the world. Elaborate marking, labeling and recording systems have been evolved to ensure complete traceability. Our dehydration facility is the most modern and integrated facility in the world and has been accredited with ISO 9001 & HACCP certification from RWTUV, Germany.

Features and Specifications

• Prevents drainage through emitters
• High and low opening and closing pressure
• Keeps system filled with water under pressure, enabling immediate start-up
• Allows all units to start-up or shut-down simultaneously
• Modular-fits all NaanDan Jain micro-sprinklers
• Tapered or bayonet connection (bayonet available only with black low-pressure LPD)
• Minimal pressure loss, even with high flow rates
• One-stage opening-Super LPD is either completely opened or completely closed
• Easily dismantled for cleaning and maintenance
• PE and PVC connections
• Black: Low-pressure Super LPD for micro-sprinklers
• Green: Medium-pressure Super LPD for foggers
• Blue: High-pressure Super LPD for foggers

• An extruded, seamless tube with drippers permanently fixed inside.
• Manufactured from special grade virgin plastic using state of- the art technology that guarantees the best results.
• Computerised continuous online quality test ensures reliable quality and consistent performance.
• Marked with two parallel yellow stripes Twin- Line. Symbol of quality. It also helps to ensure upright positioning of the dripper.
• Large cross-sectional, hydraulically designed turbulent flowpath that makes it a clog resistant emitting pipe.
• Inbuilt filters prevents physical impurities entering in to the dripper.
• Excellent CVm, manufacturers coefficient of variation, ensures best field emission uniformity.
• Precision laser drilled outlet holes.
• Best environmental stress crack resistant. Ensures long trouble free life under strigent atmospheric conditions
• Easy to roll back & re-lay.
• Minimum 100 micron filtration recommended.
• Available in four discharge rates of 0.8, 1.3, 1.6, 2.4 and 4.0 lph at 1 kg/cm pressure as per metric standard.( 0.21, 0.34, 0.42, 0.63 and 1.06 gph at 14.2 psi as per US standard.)
• Available in standard dripper spacing 20, 30, 40, 50, 60, 75 and 90 cm. Other spacing and group spacings are available on demand.
• J-Turbo Aqura is available in 12, 16, 17, 19, 20 and 23 mm nominal diameter as per metric standard. Also available in ", " and 1" nominal diameter as per US standard.
• Specially designed fittings are available. Please refer to Poly Fitting & Accessories page.

• Precision pressure-compensated, dripline
• Cascade labyrinth gives strong, self-cleaning turbulence.
• Available in -
• PC Basic Pressure Compensation - Orange
• PCAS Pressure Compensator Anti Siphon - Blue
• PCNL Pressure Compensator non Leakage - Red
• Aerodynamic dripper design ensures continuous flushing of sediments and small dirt particles.
• Weir structure protects against root intrusion and sand suction.
• Dimensional inlet filter improves clog resistance against Problematic water condition
• Low CVm for maximal uniformity results.
• High quality injection moulding silicone diaphragm.
• Flow rates: 1.0, 1.6, 2.0 & 3.6 l/h.
• PCNL Opening pressure - 1.0 kg/cm
• Closing pressure - 0.25 kg/cm
• Pressure regulating range - PC model - 0.5 - 4.0 kg/cm (7.11-56.88 psi)
• Recommended filtration level - 130 micron.
• Available in 16mm nominal diameter. Other sizes such as 17, 20 and 23 mm OD can be supplied on demand.
• Available in dripper spacing from 15-100 cm.

Applications

• All purpose versatile product.
• Pulse irrigation for greenhouse, vegetables and orchards.(PCNL)
• Suitable for surface as well as subsurface applications.(PCAS)
• Large fields with long rows (reduced filling time).

Features and Specifications

• Manufactured from special grade virginplastic material
• Use of stateoftheart technology ensures close dimensional tolerance and longer life.
• Resistant to UV radiation & environmental effects.
• Cylindrical dripper with an inbuilt silicone diaphragm ensures consistent performance for longer time.
• Online stringent quality checks at every stage.
• Especially suitable for undulating terrain and steep slopes.
• Wide pressure compensation range.
• Self cleaning, diaphragm retracts dynamically to throw away particles which are blocking the emitter.
• Specially designed emitting pipe fittings are available. Please refer to Polyfittings & Accessories pages.
• Available in nominal OD of 16mm, 20mm
• Minimum 100 micron filtration recommended.
• Available in standard dripper spacing 20, 30, 40, 50, 60, 75 & 90 cm. Other spacings available on demand.
• On request Turboline PC can also be supplied in group spacing.
• On demand, available with rodent deterrent feature.

Applications

• Ideal for irrigation of closely spaced row crops like sugarcane, cotton, banana, strawberry, floriculture, vegetables and spices.
• Suitable for surface as well as subsurface irrigation.
• Recommended for undulating terrain & steep slopes and where longer lateral running length is necessary.

Features and Specifications

• The new & innovative pressure-compensated, non-drainage dripline based on the cascade labyrinth.
• Cascade labyrinth gives strong, self-cleaning turbulence.
• Non-drainage and anti-vacuum design.
• Aerodynamic dripper design ensures continuous flushing of sediments and small dirt particles.
• Weir structure protects against root intrusion and sand suction.
• Side water inlet structure to improve clog resistance.
• Low CVm for maximal uniformity results.
• High quality diaphragm.
• Flow rates: 1.0 & 1.6 l/h.
• Pressure regulating range - PC model - 0.4-2.5kg/cm (7.11-56.88 psi)
• Recommended filtration level - 130 micron.
• Available in 16mm nominal diameter. Other sizes such as 17, 20 and 23 mm OD can be supplied on demand.
• Available in dripper spacing from 15-100 cm.

Applications

• All purpose versatile product.
• Pulse irrigation for greenhouse, vegetables and orchards.
• Suitable for surface as well as subsurface applications.
• Large fields with long rows (reduced filling time).

Features and Specifications

• Rugged reinforced plastic construction.
• Protects valves from damage due to lawn mowers, other garden equipments and vandalism.
• Provides convenient access to valves installed below ground level.
• Robust top cover with non slippery grips.
• Leaf green colour of the cover matches to surrounding lawn/turf.
• Heavy duty extended bottom keeps the valve box stable and firmly set in the soil.
• Special heavy duty model available.
• Available in circular and rectangular models.

Application

Valve guard in Turf / Landscaping and in micro irrigation systems.

• Black in color with two parallel yellow strips - "TwinLine". Also available in red stripes for rodent deterrent option.
• Manufactured from virgin LLDPE using advanced extrusion technology.
• Excellent characteristics of LLDPE provide durable tubing with close dimensional tolerances.
• UV stabilized.
• No environmental effects.
• Smooth inner surface minimizes frictional losses.
• Pre-punched tubing at specified distance and hole size can be supplied on demand (standard hole size is 2.9 mm).
• On demand, can be supplied with rodent deterrent feature.
• Manufactured as per IS / ISO/ ASAE / AS / ASTM standards.
• Each batch is tested for the following parameters:
• Dimensional tolerances.
• Short term & long term hydraulic pressure.
• Heat reversion.
• Carbon black content.
• Environmental stress crack resistance (ESCR).
• Tensile Strength and Elongation.

Features and Specifications

• Black in color with two parallel yellow strips - "TwinLine". Also available in red stripes for rodent deterrent option.
• Manufactured from virgin LLDPE using advanced extrusion technology.
• Excellent characteristics of LLDPE provide durable tubing with close dimensional tolerances.
• UV stabilized.
• No environmental effects.
• Smooth inner surface minimizes frictional losses.
• Pre-punched tubing at specified distance and hole size can be supplied on demand (standard hole size is 2.9 mm).
• On demand, can be supplied with rodent deterrent feature.
• Manufactured as per IS / ISO/ ASAE / AS / ASTM standards.
• Each batch is tested for the following parameters:
• Dimensional tolerances.
• Short term & long term hydraulic pressure.
• Heat reversion.
• Carbon black content.
• Environmental stress crack resistance (ESCR).
• Tensile Strength and Elongation.

Applications

• Used as laterals in drip irrigation system.
• Used in greenhouses for high pressure foggers, sprayheads and jets application.

Features and Specifications

• Innovative Filter Design Compact design, economical since no extra fittings required for the connection of Jain Sand Separator to Disc filter
• Standard Pure Polyester / Epoxy coating for Protecting from Corrosion Coated with more than 70 micron thick deep blue colored pure Polyester powder on outer surface & Epoxy coating from inner side for protection against corrosion and weather effects
• Various connection options available Threaded connection, Flanged connection or Easy Fix connection available
• Additional Pressure Check Assembly To check pressure from inlet side & outlet side additional pressure check assembly provided.
• Draining facility available Drain valve available for draining dirt particles from filter
• Equipped with Patended Jain Sand Separator Innovative hydrodynamic patented design used in Spin Clean Filter.
• Mild steel construction for Sand separator and special plastic alloy material for Disc filter
• Specially equipped Jain Sand Separator with disc filter for efficient filtration. It also helps to prolong cleaning of disc element.
• Removes fine sand and silt particles of size higher than 75 microns.
• Maximum operating pressure 10 kg/cm (142 psi).
• Can also be supplied in stainless steel as a special order.
• Can be supplied in multiple batteries option.
• Can also be supplied with fully automatic option.

Applications

Used in micro irrigation systems to remove sand and silt particles from irrigation water.

Features and Specifications

• Innovative Compact Filter Design To install filter in smaller area, filter is compacted without reducing performance
• Unique Smart Clean Element Unique SmartClean element, assures high performance and effective filtration. (Flow direction Out to In)
• Easy for Maintenance Strong and smooth opening, driptight SS clamp closure.
• Various Connection Options Available Threaded connection, Flanged connection or Easy Fix connection available
• Draining Facility Available Additional Drain Valve provided to remove dirt from filter
• Equipped with Pressure Check Assembly To check pressure from inlet side and outlet side, additional Pressure check assembly provided
• Manufactured from special plastic alloy material which gives very high stiffness, toughness, heat and impact resistance.
• Excellent chemical and weather resistance.
• Ribbed body construction, designed to withstand water hammer and surges in the pipe line.
• Maximum operating pressure 6 kg/cm (85.2 psi).
• Available in standard filtration of 100 micron. (Other mesh sizes are available On demand)
• Available in 2" (20 & 25 m/hr), 2 " (30 & 40 m/hr) and 3" (50 m/hr) inlet & outlet connection sizes.
• On demand, Jain Super Flow Plus can also be supplied with automatic flushing arrangement.

Applications

Used for water filtration of drip & landscape irrigation system.

Features and Specifications

• Radially Convergent Grooved Discs Disclean element with strong, precision engineered and radially grooved disc to provide fine three dimensional filtration. (Flow direction Out to In).
• Easy for Maintenance Strong and smooth opening, driptight SS clamp closure.
• Angular or Straight Outlet Option Available Optional two outlet positions facilitates installation in angular or straight fashion
• Equipped with Pressure Check Assembly To check pressure from inlet side and outlet side, additional Pressure check assembly provided.
• Various Connection Options Available Threades connection, Flanged connection or Easy Fix connection available
• Draining Facility Available Additional Drain Valve provided to remove dirt from filter
• Manufactured from special plastic alloy material which gives very high stiffness, toughness, heat and impact resistance.
• Excellent chemical and weather resistance.
• Ribbed body construction, designed to withstand water hammer and surges in the pipe line.
• Maximum operating pressure 6 kg/cm (85.2 psi).
• Available in standard filtration 130 micron. (Other mesh sizes are available On demand)
• Available in 2" (20 & 25 m/hr), 2 " (30 m/hr) and 3"(40 & 50 m3/hr) inlet & outlet connection sizes.
• On demand, Disclean PL can also be supplied with automatic flushing arrangement.

Applications

Used for water filtration of drip & landscape irrigation system

Suitable to use where precision filtration is required like reclaimed water application.

Features and Specifications

• Radially Convergent Grooved Discs Disclean element with strong, precision engineered and radially grooved disc to provide fine three dimensional filtration. (Flow direction Out to In)
• Standard Epoxy Coating for Protection from Corrosion Coated with more than 70 micron thick light blue coloured epoxy powder from both inside and outside surface for protection against corrosion and weather effects
• Various Connection Options Available Threaded connection, Flanged connection or Easy Fix connection available
• Separate Draining Facility Available Large volume of dirt collection chamber with drain valve for Hydrocyclone filter and separate drain valve for Disc Filter
• Special Rubber Cone Special rubber cone is provided at the bottom of the cone of Hydrocyclone filter to prevent wearing
• Equipped with Pressure Check Assembly To check pressure from inlet side and outlet side, additional Pressure check assembly provided
• Mild steel construction.
• Dirt can be easily flushed out through dirt collection chamber.
• Available in maximum operating pressure of 6 kg/cm (142 psi).
• Can also be supplied in stainless steel as a special order.
• Can be supplied in higher flow capacities in multiple batteries option.

Applications

Used in micro irrigation systems to remove sand and silt particles from irrigation water.

Features and Specifications

• Radially Convergent Grooved Discs Disclean element with strong, precision engineered and radially grooved disc to provide fine three dimensional filtration. (Flow direction Out to In)
• Special Filter Design Tangential inlet protects the screen from direct impact of sharp/angular particles
• Easy for Maintenance Strong and smooth opening and closing for cleaning disc element
• Standard Epoxy Coating for Protection from Corrosion Coated with more than 70 micron thick light blue coloured epoxy powder from both inside and outside surface for protection against corrosion and weather effects
• Various Connection Options Available Threaded connection, Flanged connection or Easy Fix connection available
• Draining Facility Available Drain valve position on upper & lower sides of the body provides installation flexibility
• Mild steel construction.
• Disc element construction allows easy cleaning under flowing water
• Available in standard mesh of 100 micron size. (other mesh sizes available On demand).
• Flow direction from outside of the filtering element to inside. (Out to In)
• Maximum operating pressure 6 kg/cm (142 psi).
• On demand, Disclean ML can also be supplied with automatic flushing option.
• Disclean ML filter can also be supplied with stainless steel body.

Applications

Prevents irrigation system clogging from physical contaminants.system.

Features and Specifications

• Various Options Available Available in Manual, Semi Automatic and Fully Automatic option.
• Specially Designed Valves Equipped with high performance, durable valves, which can provide consistent performance over the years.
• Equipped with Screen Filter For manifold used in Clean Master Single Unit with special provision of screen filter ensures backwash through clean water.
• Various Connection Options Available Threaded connection, Flanged connection or Easy Fix connection available
• Fabricated with galvanised / Coated pipe in various combination to assemble single or multiple unit of CleanMaster, Filtro Master and header assemblies. Light weight and cost effective plastic manifold and chemical resistant Stainless Steel manifold are available on demand.
• Standard range of manifolds includes sizes compatible with CleanMaster & FiltroMaster (single and multiple units). Other sizes can be supplied on demand.
• Standard header assemblies of 2", 2", 3" sizes are available. Other sizes or combinations can be supplied on demand.

Fabricated with galvanised / Coated pipe in various combination to assemble single or multiple unit of Clean Master, Filtro Master and header assemblies. Light weight and cost effective plastic manifold and chemical resistant Stainless Steel manifold are available on demand.

Features and Specifications

• Uniformly graded, angular sand particles for high filtration
• efficiency.
• Purity of silica 98.8%.
• Particle size range 1 mm to 2 mm (0.039 to 0.078 inch),
• passes through 10 mesh and retained on 18 mesh.
• Uniformity coefficient 1.5.
• Available in 30 kg packing.

Applications

Used as media in various media filters for water filtration

Features and Specifications

• Standard Pure Polyester / Epoxy coating for Protecting from Corrosion Coated with more than 70 micron thick deep blue colored pure Polyester powder on outer surface & Epoxy coating from inner side for protection against corrosion and weather effects
• Innovative Turbulent Inlet Turbulent inlet ensures thorough mixing of chemicals and / or fertilizers
• Additional fine filter To avoid entry of solid particles in system, Special provision of strainer on the outlet side
• Separate Draining facility available Special Drain port given to flush the tank
• Mild steel construction.
• Separate valves are provided on the inlet & outlet to control the injection rate.
• High pressure hose assembly inlet / outlet connection.
• Wide 8 opening for easy pouring of stock solution.
• Maximum working pressure 10 kg/cm (142 psi).
• Available in 30, 60, 90, 120 & 160 liter (8, 16, 24, 32 & 42 US gallon) capacity.
• Can also be supplied in stainless steel material

Applications

Fertilizer and chemical injection through drip and sprinkler irrigation systems.

Features and Specifications

• Innovative Venturi design Innovative design of convergent, throat and divergent sections of Venturi for more injection rate
• Additional Valve Provided Additional Valve provided for suction side to prevent reverse flow of water
• Additional Fine Suction Filter To avoid entry of solid particles in system, additional suction filter is provided
• Various Option Available Venturies are available from ", 1", 1", 1", 2"
• Made of engineering plastic.
• Excellent chemical resistance to most of the chemicals.
• Highly efficient and compact differential pressure injection device.
• Economical and low cost option
• Available in ", 1", 1", 1" and 2" BSP inlet / outlet connection. Any other size can be supplied on demand.

Applications

Fertilizer and chemical injection through drip and sprinkler irrigation systems

Features and Specifications

• Innovative Compact design Innovative compact design which operated without electricity
• Accurate and Proportional Injection Rate For accurate injection, special adjusting lock arrangement provided
• Additional Fine Suction Filter To avoid entry of solid particles in system, additional suction filter is provided
• Different options available ON/OFF Knob OR Air Release option available
• Made of strong plastic material with high chemical resistance.
• Choice of selection on the basis of desired proportions,
• Adjustable from 0.3% to 2%.
• Adjustable from 0.4% to 4%.
• Fixed dosage 6%.
• Available in two models to provide operational flexibility,
• With on/off system.
• With Air Release Valve.
• Maximum operating pressure 5 kg/cm (70 psi). High pressure model (6 kg/cm) available on demand.
• Simple to install, operate and maintain.
• Low pressure loss.
• " BSP inlet / outlet connection.
• Dosing flow range,
• 0.6 to 50 lph for 0.3% to 2% adjustable.
• 0.12 to 100 lph for 0.4% to 4% adjustable.
• 150 lph for 6% fixed dosage.

Applications

Recommended to use where precise application of fertilizer and other agricultural chemicals are require.

Features and Specifications

• Heavy Duty, High Quality, Light Weight Tank Manufactured from Heavy Duty, High Quality Plastic Fertilizer Tank with optimum weight
• Innovative Turbulent Inlet Turbulent inlet ensures thorough mixing of chemicals and / or fertilizers.
• Additional Fine Filter To avoid entry of solid particles in system, Special provision of strainer on the outlet
• Separate Draining Facility Available Special Drain port given to flush the tank
• Separate valves are provided on the inlet & outlet to control the injection rate.
• High pressure hose assembly inlet / outlet connection.
• Maximum working pressure 6 kg/cm.
• Available in 30, 60 & 90 liter (8, 16 & 24 gallon) capacity.

Applications

Fertilizer and chemical injection through drip and sprinkler irrigation systems.

Features and Specifications

• Chemical-resistant high-grade plastic material for precision, durability and flow-rate reliability .
• The dripper design integrates three elements to minimize clogging.
• Protected cross-shaped water inlet.
• Flushing mechanism of regulating diaphragm.
• Strong turbulent flow in labyrinth with continual cleaning and flushing.
• Large water passages.
• Two models are available: PC and PC CNL (anti-drainage).
• Colour-coded for identification of discharge and model

PC+ CNL: Grey housing

• PC: Green housing
• 1.3 lph: Grey cover
• 2.0 lph: Brown cover
• 3.0 lph: Blue cover
• 4.0 lph: Black cover
• 8.0 lph: Green cover
• 12.0 lph: Red cover
• Standard 5 mm extension for connection of extenstion tube.
• Wide and precise regulating range from 0.5 to 4.0 kg/cm (7.11 to 56.88 psi).
• Nominal discharge: 1.3, 2.0, 3.0, 4.0, 8.0, 12.0 lph.
• CVm: less than 4%.

Prevents low head drainage (CNL model).

• Opening pressure: 8.0 m
• Closing pressure: 3.0 m
• Maximum lateral Length (m) on flat ground.
• Precise irrigation in soilless culture growing conditions and pulse irrigation.
• Can be used for subsurface installation.
• On demand Click Tif-HD can also be supplied with anti-bug cap option for protection against bugs.
• On demand Click Tif-HD can also be supplied with barbed outlet option.
• Required punch size 2.5 mm (code ITC).
• Minimum filtration requirement - 100 micron.

Applications

• For orchards and vineyards, greenhouses, nurseries and landscape applications.
• For areas with harsh topographical conditions.
• Irrigation of pot-plants with single, two, four or multiple outlets.

The New Jain Jet offers the latest in precision molding technology ensuring it is the best micro jet on the market! Newly redesigned, the Jain Jet has the cleanest and sharpest patterns in the industry to help ensure that each plant receives the right amount of water at the right time. The Jain Jet offers the widest range of flow rate and distribution patterns in the industry to be able to meet all your design and application needs.

Features and Specifications

• Static, no moving parts
• 7 color coded nozzles for easy identification of flow rate.
• 18 different wetting patterns to chose from for optimum wetted diameter
• Precision molding ensures precise spray patterns
• Manufactured from the highest quality materials for long term field operations
• Fast and easy installation quick thread technology
• Low maintenance
• Easy clog detection
• Top Hat available to use with young trees for reduced radius and higher application rates in root zones
• Flow rates: 4.4 to 29.4 gph
• Working Pressure: 10 to 30 psi
• Wetted Diameter: 7 to 34 feet
• Filter Requirement: 120 mesh

Applications

• Orchards: Almonds, Walnuts, Stone-Fruit, and citrus
• Vineyards
• Organic or convential fields

Features and Specifications

• The double purpose emitter for misting & irrigation over propagation benches.
• Uniform coverage.
• Ideal droplet size prevents drift of excessively fine mist.
• Coloured nozzles for various flow rates.
• No dripping during operation.
• Undisturbed and symmetrical water distribution (no deflection or dead corners).
• Can be fitted with Leakage Prevention Device (LPD) for perfect pulsed operation.

Applications

• Height of units above bench: 1.0 - 1.2 m.
• Maximum spacing between units on lateral: 1.0 m.
• Maximum spacing between laterals: 1.0 m.
• Maximum distance of lateral from bench edge: 0.2 m

Features and Specifications

• Chemical resistant raw materials.
• The optimal solution for cooling, humidifying and pesticide spraying in greenhouses.
• Very small droplets (average of 90 microns) for minimal foliage wetting ( pulsed operation).
• Two nozzle fogger with built-in Leakage Prevention Device.
• Precision engineering to give fine droplets (average 90 microns).
• Economical.
• Excellent Coverage.
• Easy to install and service.
• Different connection options suitable for PE and PVC pipe.
• Discharge - 13 lph ( 2 x 6.5 lph outlets ).
• Operating pressure: 4.0 kg/cm (56.88 psi).
• Recommended spacing:
• For cooling and humidifying only:
• 2.0 to 3.0 m between Foggers.
• For cooling, humidifying and spraying :
• 2.0 to 3.0 m between laterals.
• 1.5 m between Foggers.
• Minimum filtration requirement 75 micron.

Features and Specifications

• Manufactured from high quality polymers.
• Holds the PE tube firmly at required position. Avoids dispositioning of PE tube.
• Distributes water evenly.
• Used with micro tube of 1.0 mm (0.036") ID, 1.3 mm (0.05") ID, 3.3 mm (0.13") OD and 1.5 mm (0.06") ID.
• Recommended operating pressure of 0.5 kg/cm2(7psi)for 1.00mm(0.036")ID tubing and 0.35 kg/cm2(5 psi)for 1.3mm(0.05")and 1.5 mm(0.06")ID tubing and for 60cm(24")length of tubing.
• Easy to Install & Monitor.

Applications

• Ideally used for irrigation in bag culture.
• Recommended to use where dispositioning of tubing is a problem.

Features and Specifications

• Turbulent flow path resist clogging.
• Strong ribbed stake allows exact positioning of the dripper.
• Can be used with 6mm OD extension tube or vinyl tube.
• Easy to install.
• Colour of the dripper represents flow and facilitates easy identification.
• On demand can supply assembly including dripper attached with required length of extension tube and take off.
• Minimum filtration requirement - 100 micron.

Applications

Suitable for pot irrigation, nurseries, glass/green houses, vegetables, home gardens.

Features and Specifications

• light weight for easier & economical installation
• Manufactured from high performance rigid uPVC / Nylon of compound
• Precise flow control possible
• Low frictional losses
• Excellent chemical & corrosion resistance
• Maximum operating pressure 10 kg/cm (142 psi)
• Available in 50, 63, 75 & 90 mm (1", 2", 2" & 3") connection sizes.

Application

Suitable for flow control in irrigation & water supply lines.

Features and Specifications

• Manufactured with UV & sunlight resistant, chemical resistant, non corrosive plastic material for stable performance.
• Colour coded nozzle for different flow rates.
• Uniform coverage.
• Fine misty spray.
• Easy to install and service.
• Wide flow range, 17-71 lph (4.5 - 18.8 gph) at operating pressure of 1 kg/cm (14.22 psi).
• 10-24 buttress triple lead fast thread inlet.
• Can be supplied with Leakage Prevention Device (LPD) for pulsed operation and to prevent low head drainage.
• On demand, Acu-Mister can be supplied as an assembly.
• Minimum filtration requirement - 100 micron.

Applications

• Ideal for plant propagation.
• Recommended for climate control in Greenhouse / Shade house.

Features and Specifications

• Molded Adaptor Molded Adaptor at Top of Stake to hold Jet
• Sharp end Sparp end at bottom for easy insertion in field
• Tube specifications.

Application

Used with Mini Sprinkler (Suitable Vinyl Tube)

Features and Specifications

• Manufactured from tough engineering plastic
• Non corrosive & resistant to chemicals
• UV resistant fittings

Application

Used to connect thin wall thickness tubes as per following specifications

Features and Specifications

• Single Barb Design Single barb fitting used for connecting one or more outlets from one dripper / emitter
• Special Connector for Multi Outlet Connection Special one piece connector designed for Green House and Poly House
• Used in Polyhouse / Greenhouse and Nurseries (Suitable Vinyl tubes)

Application

Used in Open field Polyhouse / Greenhouse and Nurseries on JSCPC Plus, Click tif, J-Turbo key Plus emitters (Suitable Polytubes / Jain Tough Hose)

Features and Specifications

• Manufactured from tough engineering plastic
• Non corrosive & resistant to chemicals
• UV resistant fittings

Application

Used to connect thin wall thickness tubes as per following specifications