Wires

Leading Manufacturer, Supplier & Retailer of Copper Nickel Wire, Nichrome Wire, Tig Welding Wires, Fuse Wire and Tin Coated Steel Wire.

Copper Nickel Wire

Werkstoff Nr 2.0881
JLC Alloy 10 2.0807

. They are easily soldered. Typical applications of these alloys are for electrical resistors and general resistance wire for heating wires, cables, and mats. They are also used as resistance elements of heaters for electrical circuit breakersfuses in heating cables with low temperatures. In ribbon form, they are used for heating bimetals.

View Complete Details

Ask Latest Price & Details

Nichrome Wire

We, at JLC, believe in continuous improvement; all processes are monitored at each step using statistical process control tools to ensure the best quality of the final products. The process for making each alloy is set after a detailed exercise using concepts such as Failure Mode Effect Analysis (FEMA) and Design of Experiments (DOE).

View Complete Details

Ask Latest Price & Details

Tig Welding Wires

Grades of NiFe also available. Please contact JLC for any other special grades of Nickel based MIG & TIG Wires. Wires >1.50mm diameter are available in wire-rods and coil as per the customer specification.

View Complete Details

Ask Latest Price & Details

Fuse Wire

A fuse wire is used in incandescent and fluoroscent tube lamps as circuit breakers when conditions of over-current or over-loading arise. Fuse wire makes up the outer-lead of one or both lead-in-wires. The following alloys can be used for fuse wires: NiCu30Fe, FeCrAl125, or FeNi43.

View Complete Details

Ask Latest Price & Details

Tin Coated Steel Wire

Nominal 2-4% by weight in thickness for NPS is used in lead wires for lighting applications. Higher nickel plating thickness (like 4%, 8%, 12% ) can be manufactured as per customer requirement. The nickel coating has uniform adhesion over the full length of the steel core wire.

View Complete Details

Ask Latest Price & Details

Nickel Plated Copper Wire

Diameter of wire(mm) 0.20 - 0.60
Thickness of Nickel plating(% by weight) 2.0 - 4.0

Pure electrolytic copper wire uniformly electroplated with nickel. This wire is used for inner-lead part in Lead-in-Wires of incandescent bulbs, fluorescent tube, halogen, HID, automotive, and other lamps. It is also used in cable industry for automotive and other electronics applications. 2-4% by weight or minimum of 2% by weight in thickness. Higher Nickel plating thickness (like 4% or 8%) can be manufactured as per customer requirement. The nickel coating has uniform adhesion over the full length of the copper core wire.

View Complete Details

Ask Latest Price & Details

Nickel Plated Steel Wire

Size in mm 0.4, 0.5, 0.6
Tolerance (+/-) 0.01, 0.01, 0.01

Nickel Plated Pteel Wire is a low carbon steel wire electroplated with nickel. It is used as the inner- lead component for lead-in-wires used in incadescent bulbs, fluoroscent tubes, halgen lamps, HID lamps, automotive, and other lamps. It is also used as a third wire to support the anode ring used in fluorescent tube lamps. NPS is also used for making music wire and for other applications that require corrosion resistance.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

JLC Electromet Pvt. Ltd. (Jlc Electromet Pvt. Ltd.)
Road No. 11-H, Vishwakarma Industrial Area, JAIPUR 302 013 (INDIA), Rajasthan - 302013
Share us via
Found Something Wrong with this Listing? Report Here.