Other Products / Services #5800577

Most cows have four functional teats. Therefore, milking machines are designed with four teat cups. These are composed of an inner rubber liner and an outer shell, usually made of metal. The rubber liner is relatively thin in the section that sits inside of the shell, while the liners tube below the shell is thicker rubber. Advantages

• Elimination of labour - The farmer is freed from the milking process and associated rigid schedule, and labour is devoted to supervision of animals, feeding, etc.
• Milking consistency The milking process is consistent for every cow and every visit, and is not influenced by different persons milking the cows.
• Increased milking frequency Milking frequency may increase to three times per day, however typically 2.5 times per day is achieved. This may result in less stress on the udder and increased comfort for the cow.
• Perceived lower stress environment There is a perception that elective milking schedules reduce cow stress. A study found no decrease in stress between automatic and conventional milking.

We import outlet head from reputed International company. These outlet head are used in the homogenizing chamber. Available in a variety of designs and materials. Each type specially designed to achieve the highest efficiency with lowest power consumption It is made up of special grade of tungsten carbide. It can be used for various applications in machines like FBF Italia, APV, Gaulin, SPX etc.

Oil filter is used in high pressure homogenizer to clean the lubrication oil for safe working of machine. It needs to clean or replaced regularly. Different oil filters depending on the capacity of homogenizer and micron size are available with us.

Inlet pressure gauge is very important part of homogenizer and high pressure pump which is required for the safe working of machine. This is a special type of pressure gauge which not only shows the pressure but also acts as a pressure switch. We Supply these imported spares for various homogenizer machines models like FBF Italia, APV, SPX, Gaulin etc.

We supply High Load capacity bearings for crankshaft and gear box in the homogenizer like FBF Italia homogenizer, Gaulin Homogenizer, Tetra pak Homogenizers, GEA Homogenizer etc. We have large stock for different bearings used in different machines.

Connecting rod is used in homogenizer and high pressure pumps in combination of crankshaft to convert the rotary motion into reciprocating motion. We supply different types of connecting rods for different machines.

Belts are used in the homogenizer to convert the power from main motor to gear box. Different types of the belt for high duty application are used in this type of homogenizer and high pressure pump. We have different grades and specification of belts according to the machine model and type.

This chamber are made up of special grade of forged steel. This is the chamber were exactly the homogenization takes place. It is used in the first stage homogenization and second stage homogenization. We have the large stock of homogenization chamber depending on type and model of machines.

Springs are used in Homogenizer in the cylindrical block as well as Homogenising Chamber. We supply all types of Springs depending on the size and type as per your requirement and as per the model of the machine.

Crankshaft is a heart of homogenizer and high pressure pump. We supply high duty crankshaft made up of special grade. We have a large stock of crankshaft for different models of machines.

We supply oil pumps for the homogenizer machine models like FBF Italia, Gaulin , Tetra Pak, APV, GEA We have a large stock of oil pumps available with us according to different models and application of the machines. These oil Pumps are a very important part of the homogenising machine

We supply complete product gaskets for different models of machines. All these gaskets are made of different material like PVDF, viton, EPDM, chevron etc. We have a large stock of to catered the need of customer.

High-Pressure pumps are used as the main feed pump to spray dryers which are equipped with one or two fluid nozzles. They are also employed as a feed pump for a growing market of reverse osmosis systems used in concentrating functional and sensitive products in the Dairy, Food, Pharmaceutical and Biotechnologies industries. Many brands are available, as an independent supplier we offer you the choice from varieties of the leading OEMs.

Milk machines are used to harvest milk from cows when manual milking becomes inefficient or labour intensive. Milk Machinery is made up of a claw, four teat cups (Shell and silicon rubber liners) long milk tube, long pulsation tube, and a pulsator. We supply Milking Machine and its Spare parts like Milk Claw PSU, four teat cups , long Milk Tube, Long pulsation tube and a pulsator.

As an independent supplier of Homogenisers we offer you the choice of machines suitable for all budgets, specifications and build quality. If you are looking for a machine from a leading OEM, we can supply you with an variety of machines which offer excellent value for money. If you are looking to part exchange your old and tired Homogenisers, we would be happy to consider your machine in part exchange. If you are low on budget still we have a good quality of used homogenizers to fulfil your demand and keep your plant running

Milk claw made from polysuflone PSU-high quality thermoplastic resin is resistant to deformation under load at high temperature and environmental conditions, resistant to radiation. Very strong, Resistant to chemicals. Milk claw PSU 300 ml designed for milking points with automatic cluster remover.