Standard Equipment

• Leveling outrigger device
• Two controllers operation
• Emergency stop button
• Emergency lowering system
• Overloading limited
• Battery charge indicator
• Limit switch
• Level instrument

Vertical Mast Lifts (Self Propelled)

• A motor controller increases proportionality and Improves battery life by adjusting the speed of the motor and output from the hydraulic gear pump
• Gives a zero inside turning radius due to Front wheel hydraulic drive with 90-degree steering
• Can operate with condence in the smallest of spaces and near sensitive & valuable equipment.
• Ensures reliable operation due to spring “coil” type control and power cable
• Minimize tip over hazards due to pothole protection
• Allows easy step in entry and exit from platform due to Low stowed platform height
• Easy transportation due to tie down lift lugs Up to 30% gradeability.
• The cylinder can be removed without disassembling the mast

Details

• Standard equipment
• Proportional controls
• Automatic Pothole Protection
• 2WD
• Emergency lowering system
• Emergency stop button
• Onboard diagnostic system
• Tilt sensor with alarm
• Low volt age alarm
• Horn
• Hour meter
• Forklift pockets
• Charger protection
• Charge indicator
• Flashing beacon
• Can Bus Technology
• Controllerlanguages choose

Tandard Configuration

• 2-Wheel Hydraulic Motor Drive
• 2-Wheel Steering
• High/Lowtravel speed
• Extension Platform
• Foldable Guardrails
• Tilt sensingAlarm
• Dawn Alarm
• Safely Support
• Timer
• Intelligent Charger
• Swing—oui Tray
• Pothole Protection DQWCQ
• Emergency Down Device
• Emergency Release Brake
• Anti-collision Protection of Platform

Standard Equipment

• Leveling outrigger device
• Two controllers operation
• Emergency stop button
• Emergency lowering system
• Overloading limited
• Battery charge indicator
• Limit switch

Advantages & Safety Features

• Chequered platform with anti-skid feature for safety of the operator/ MHE.
• Hose burst valve ensures safety in case of hydraulic hose rupture.
• Low voltage control box with Lift-Lower buttons and Emergency Power Cut-off.
• Protection against overloading.
• Manual relief valve for smooth landing of lift in case of power failure.
• Optional type ground rails all around with door to protect the operator.
• Robust scissor arms made from tubular/I beam sections for higher strength.
• Heavy duty / rugged design gives durability and job safety.
• Carbon steel pivot pins ground and plated to high precession.
• In-built hydraulic power-packs with the electric motor, gear pump, valve-block, suction-return line filters and different valves makes it compact.
• Hydraulic cylinders with hard chrome plated piston rod, honed cylinder tube and it is assembled with high quality seals and guide rings gives longer life.
• Dual station operation.
• Self lubricated graphite base bushes ensures trouble free operations.

Details

• Ideal for material shifting at various floor heights site
• Capacity up to 3T
• Lift heights up to 12mtr
• Available based on application, in single or double mast construction
• Complete Customise solutions available as per site application

Standard Equipment

• Leveling outrigger device
• Two controllers operation
• Emergency stop button
• Emergency lowering system
• Overloading limited
• Battery charge indicator
• Limit switch
• Level instrument

Vertical Mast Lifts (Self Propelled)

• A motor controller increases proportionality and Improves battery life by adjusting the speed of the motor and output from the hydraulic gear pump
• Gives a zero inside turning radius due to Front wheel hydraulic drive with 90-degree steering
• Can operate with condence in the smallest of spaces and near sensitive & valuable equipment.
• Ensures reliable operation due to spring “coil” type control and power cable
• Minimize tip over hazards due to pothole protection
• Allows easy step in entry and exit from platform due to Low stowed platform height
• Easy transportation due to tie down lift lugs Up to 30% gradeability.
• The cylinder can be removed without disassembling the mast

Details

• Standard equipment
• Proportional controls
• Automatic Pothole Protection
• 2WD
• Emergency lowering system
• Emergency stop button
• Onboard diagnostic system
• Tilt sensor with alarm
• Low volt age alarm
• Horn
• Hour meter
• Forklift pockets
• Charger protection
• Charge indicator
• Flashing beacon
• Can Bus Technology
• Controllerlanguages choose

Tandard Configuration

• 2-Wheel Hydraulic Motor Drive
• 2-Wheel Steering
• High/Lowtravel speed
• Extension Platform
• Foldable Guardrails
• Tilt sensingAlarm
• Dawn Alarm
• Safely Support
• Timer
• Intelligent Charger
• Swing—oui Tray
• Pothole Protection DQWCQ
• Emergency Down Device
• Emergency Release Brake
• Anti-collision Protection of Platform

Standard Equipment

• Leveling outrigger device
• Two controllers operation
• Emergency stop button
• Emergency lowering system
• Overloading limited
• Battery charge indicator
• Limit switch

Advantages & Safety Features

• Chequered platform with anti-skid feature for safety of the operator/ MHE.
• Hose burst valve ensures safety in case of hydraulic hose rupture.
• Low voltage control box with Lift-Lower buttons and Emergency Power Cut-off.
• Protection against overloading.
• Manual relief valve for smooth landing of lift in case of power failure.
• Optional type ground rails all around with door to protect the operator.
• Robust scissor arms made from tubular/I beam sections for higher strength.
• Heavy duty / rugged design gives durability and job safety.
• Carbon steel pivot pins ground and plated to high precession.
• In-built hydraulic power-packs with the electric motor, gear pump, valve-block, suction-return line filters and different valves makes it compact.
• Hydraulic cylinders with hard chrome plated piston rod, honed cylinder tube and it is assembled with high quality seals and guide rings gives longer life.
• Dual station operation.
• Self lubricated graphite base bushes ensures trouble free operations.

Details

• Ideal for material shifting at various floor heights site
• Capacity up to 3T
• Lift heights up to 12mtr
• Available based on application, in single or double mast construction
• Complete Customise solutions available as per site application