We are leaders in the market for providing best range of Fatigue Testing Machine, Computerized Universal Testing Machine, Impact Testing Machine, Hardness Testing Machine and Universal Testing Machine
Machine must meet requirement of IS5075 - 1969 Table model for simple lever system at charging load Accessories must be calibrated as per IS 5075 - 1969 Maximum bending moment Kg cm-200 Bending moment adjustable Kg cm - 25 - 125 Ranges 1Kg cm - 25 - 125 & 11 Kgs cm 125 - 200 Gripping Diameter of specimen (in mm) - 08 Accuracy of bending moment 1% Digital counter number of digits-10 Power required, HP - 0.5 Main supply - 3ph, 440, 50 Hz A.C.
Impact Tester Model JIT - 30 is designed for conducting CHARPY, IZOD ans IMPACT TENSION tests. The test methods confirm to IS 1757-1761, IS : 1499-1959 and BS : 131:131 : Part 2 & 3, IS:1598-1960, BS : 131 part I and ASTM E 32-47T. The impact energy absorbed by the specimen during rupture is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read on the dial scale.
Universal Hardness Testers, equipped with a set of six ball bearings guide device, for the plungerspindle, automatic load selection for 15, 20, 30, 40, 45, 50, 60, 100, 125, 150, 187.5 and 250 kg for conducting Vickers, Brinell, Standard Rockwell and Superficial Rockwell method tests.
Salient Features : Loading accuracy: As high as +1% Speeds: Straining at variable speeds to suit wide range of materials Facilities for Test: Motor - driven threaded columns for quick and convenient adjustment of lower cross head to facilitate rapid fixing of test specimen Ideal Dial: High reading accuracy due to large size ideal design of dial. Large Columns: Large effective clearance between columns enables testing of standard specimens as well as structures. Easy Changeability:Easy change from plain to threated and screwed specimens
The machine is designed for conducting bend test on steel wires of major dimensions from 0.8 mm to 5 mm. The test is conducting by repeat bending of test piece, rupture over a cylindrical surface of specified radius through 90 deg. In opposite direction in one place by gripping one end . The machine is been designed keeping in view the essential elements given in is. 1716-1971. If consists of a base plate on which is fixed is a complete arrangement for conducting bend test on wires. The machine is dispatched complete in an assembled from ready to conduct the list. Two Allen keys are supplied along with the machine for frightening of cylindrical formers carried in the block while a spanner is used for frightening the bolt of the guide arm which slides in the slot given in the operating handles and this slot is marked in millimeters for adjusting the height.
Moisture contents at which soil as smallest plasticity is called limit. For determination purpose plastic limit is defied as the water content at which a soil will just begin to crumble when rolled into a thread of 3mm. dia. Specifications:The complete set consists of one each: - Glass plate 20cm x 115cm having ground ends and one side frosted. Brass or stainless steel rod 3 mm dia x 150mm long. 1. Flexible spatula. 2. Set of 6 moisture containers. 3. Porcelaine basin 150mm dia. 4. Plastic wash bottle 500 ml..
The number of twist required to fracture a wire sample can be determined rapidly with this machine . The standard machine consists of a gear box coupled with a motor to give out put of either 30, 60 or 90rpm. A revolution counter indicates the total number of twist , and stops counting when the sample fails. The distance between the rotating and non-rotating chuck can be between these two chucks. The wires from 1 to 10 mm can be tested with this machine. The machine is electrically operated suitable for operate on 400-440 volts, 3 phase , ac supply. The machine is available in two models one for testing wires in the range of 1-5 mm and the other 4-10 mm.
Spring Testing Machine for Testing Measuring the compression, Tension and Retraction of Springs. The machine has a linear least count of 100 grams for load and 0.1 mm for displacement through out the range of 0 to 5 KN. The machine is manually electrically operated and has digital read out for load as well s displacement for accurately measuring the deflection and expansion of springs. The machine has a test height of 15 inch and is capable of holding springs of O.D. upto 8 inch.
The erichsen tester is designed to test the plasticity of metals. This machine measures the erichsen's number of sheet metal to determine its suitability for press work or toughness thereof. The main dimensions of the machine and the method of inspection are so selected as to make the machine quite reliable in its mechanism. Features the pignandle and the intermediate gearing provided make easy pressing and swelling out of the charged sheet metal by the punch. it is easy to set the pointer to zero as the top of the punch and the furrow holding plane are always made to coincide by a measurement correction panel.
Tensile Testing Machine for determining the tensile strength and elongation of materials like wires, cables conductors, plywood, ferrous & non-ferrous material. Salient Features : High accuracy of +1% as per IS 1828. Three measuring ranges for accurate testing. Simple in construction and control for easy operation and maintenance. Load and elongation recorders are provided where every necessary. A number of straining speeds are available for selection. Attachments for conducting compression, bending shear tests. Digital display of load and elongation can be provided with data recording printer. Wide range of grips to suit variety of materials and shapes. Provision of adequate safety devices.
It is electrically operated and is used to check the physical impurities. It is basically vertical type, limit switches are incorporated for both the directions so as to limit the traveling range . The accuracy of the machine is within permissible limit as per is: 1828 load elongation recorder can also be provided on request.