Post Buy Requirement
K&
Delhi, India
Add Review

Other Products / Services #5392592

Prefabricated Toilet

  • Height 2310mm
  • Width 1010mm
  • Depth 1220mm
Frame and Panels are manufactured from RCC using M-30 grade of Concrete, Panels are reinforced with 4x50x50mm welded wire mesh.Door is manufactured from 12mm thick laminated cement particle board (BISON or equivalent), Side RCC panels are 25mm thick while the bottom panel is 40mm thick, A unique lock is provided to close the cabin when in use. The door lock is designed so that the same can be locked from inside or outside but never both.The cost of the lock is almost NIL therefore its theft is not a concern.
View Complete Details

Pvc Foot Step

  • Thickness 20 mm
  • Width 165 mm
  • Length 260 mm
Minimum 3 mm thick Polypropylene copolymer is injection moulded around a 12 mm dia tor-steel bar, Minimum overall length of 260 mm and width of 165 mm, Protruding legs have a 2 mm tread on top surface by dots for providing an antiskid surface, Designed to withstand the bend test and chemical resistance test as per specification, Polyproplyene copolymer conforming to ASTM D-4101IS-10910
View Complete Details

Plastic Cover Blocks

  • Spacers, also knConcrete Cover (in mm)own as cover blocks, provide the specified concrete cover to the reinforcement used in RCC construction both before and during concreting. 20/25/30
  • Maximum Bar Size (in mm) 16
Spacers, also known as cover blocks, provide the specified concrete cover to the reinforcement used in RCC construction both before and during concreting.
View Complete Details

Concrete Compound Wall

Concrete Boundary Walls overcome these handicaps of traditional brick walls. Our Precast concrete boundary walls are fast and easy to construct and have a virtually unlimited life. These walls are low maintenance and do not deteriorate with time.
View Complete Details

Cement Manhole Cover

Test Load as per (IS-12592 Part 1) for Extra Heavy Duty is 35 MT, Heavy Duty is 20 MT, Medium Duty is 10 MT, and Light Duty is 2.5MT, Covers can also be provided with holes for storm water drainage, Note: Covers of non standard sizes can also be supplied, Covers are provided with hot dip galvanized lifting hooks
View Complete Details

Kerb Moulds

  • strength 30MPa
KK products provide consistent long term performance, All kerb stones are made from concrete mix design with a minimum 28 day compressive strength of 30MPa (also known as M30)
View Complete Details

Grass Concrete Paver

  • Dimensions 300x300x60mm
Our range of floor slabs and interlocking pavers help create an inviting and durable area for both residential and commercial applications. Overall Dimensions: 300x300x60mm thickness
Our Grass Grids and Grass Pavers allow grass to grow in heavily trafficked areas.
View Complete Details

Double Side Chair Bench With Back Rest


  • Each bench consists of 2 Nos base support in grey cement colour (Thickness:100mm, Back height:1000 mm & Front height:450mm, Base width:1435 mm) and 10 Nos. reinforced concrete planks in red colour of size 1500 X 100 X 50mm, and 2 No. of reinforced concrete plank of size 1500 X 200 X 50 mm

  • Overall Dimensions:Seating length of the Bench:1500 mm on one side & 1500 mm on the opposite side; Seating height of the Bench:450 mm; Total height of the Bench:1000 mm

  • All components are reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection

  • All parts are joined together with galvanized nuts & bolts of suitable size and all bolts are sealed after assembly

  • Bench top and back planks are treated with special anti- corrosive, water proof coating so as to make surfaces glossy and water proof

  • All components are manufactured by using M-30 grade of Concrete using vibro compaction process.

View Complete Details

Round Shape Curved Bench


SPECIFICATION



  • Overall Dimensions: Sitting Platform size - 1600mm I.D. X 2400mm O.D. X 400 mm width X 50mm Thickness; Leg size - 400mm Height X 400mm Width X 80/55mm thickness; Sitting height is 450 mm

  • Sitting Platform is in Red colour while the legs are in grey colour

  • Manufactured by using M-30 grade of Concrete

  • Suitably reinforced to promote long use and to prevent damage during handling, transportation & erection

  • Treated with special anti-corrosive, water proof coating so as to make the surface glossy and water proof


View Complete Details

Precast U Drain

  • Nominal Size 500x200x250
  • Length 500
  • Width 200
Precast concrete U drains allow for speedier construction of channels with minimum wet cast concrete work. KK manufactures a full range of U shaped drains. These drains range in widths from 200 mm to 855 mm. They are produced in strict factory controlled conditions that ensure high quality. Besides storm water drainage, these types of drains are also used to house underground cables and waterlines in industrial setup.
View Complete Details

Chair Bench With Back Rest


  • Each bench consists of 2 Nos.L-shape base support in grey cement color (thickness:100 mm, Back height:1000 mm, front height:450 mm, Base width:620mm) and 5 Nos. reinforced concrete planks in red colour or terazzo finish of size 1500mm X 100mm X 50mm, and 1 No. of reinforced concrete plank of size 1500mm X 200mm X 50mm

  • Overall Dimensions:Seating length of the Bench:1500 mm; Seating height of the Bench:450 mm; Total height of the Bench:1000 mm

  • All components are reinforced suitably for long use and to prevent damage during handling, transportation, and erection

  • All parts are joined together with galvanized nuts & bolts of suitable size and all bolts are sealed after assembly

  • Bench top and back planks are treated with special anti-corrosive, water proof coating so as to make surfaces glossy and water proof

  • All components are manufactured by using M-30 grade of Concrete using vibro compaction process

View Complete Details

Round Bench, Round Table


  • Consists of 2 Nos. Base support in grey cement, Table of size 1000mm dia. X 50mm thickness in terrazzo finish, and 1 nos. bench of size 1700mm outer dia X 1200mm inner dia X 50mm thickness in terrazzo finish

  • Overall dimensions:Height of table:780 mm; Height of bench:450 mm

  • All components are manufactured by using M-30 grade of Concrete using vibro-compaction process

  • All components are reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection

  • All components are joined together with galvanized nuts & bolts, so as to make one composite table & bench

  • Table top and bench tops are treated with special anti-corrosive, water proof coating so as to make surfaces glossy and water proof.

View Complete Details

Rectangular Table With 2 Benches


  • Consists of 2 Nos base support in grey cement, 1 No table top of size 1500mm length X 800mm width X 50mm thickness inred colour or terazzofinish, and 2 Nos. benches of size 1500mm length X 325mm width X 50mm thickness inred colour or terazzofinish

  • Overall Dimensions:Height of table:780 mm; Height of bench:450 mm.

  • All components are manufactured by using M-30 grade of Concrete using vibro-compaction process

  • Reinforced suitably to promote long use and to prevent damage during handling transportation, & erection

  • All the components are joined together with galvanized nuts & bolts, so as to make one composite table & bench

  • Table and bench tops are treated with special anti-corrosive, water proof coating so as to make surfaces glossy and water proof.

View Complete Details

Round Table With Four Benches


  • Consists of 2 Nos. Base support in grey cement concrete, Table of size 1000mm dia. X 50mm thickness interazzo or red colourfinish, and 4 nos. benches of size 1000mm length X 350mm width X 50mm thickness interazzo or red colour finish(Curved)

  • Overall Dimensions:Height of table:780 mm; Height of benches:450 mm

  • All components are manufactured by using M-30 grade of Concrete using vibro-compaction process

  • All components are reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection

  • All components are joined together with galvanized nuts & bolts, so as to make one composite table & bench

  • Table top and bench tops are treated with special anti-corrosive, water proof coating so as to make surfaces glossy and water proof

View Complete Details

Square Table With 4 Benches


  • Consists of 2 Nos. base support in grey cement, 1 Nos. Table top of size 1000mm X 1000mm X 50mm thickness interazzo or red colourfinish, and 4 Nos. benches of size 1000mm length X 350mm width X 50mm thickness interazzo or red colourfinish

  • Overall Dimensions:Height of table:780 mm; Height of benches:450 mm

  • All components are manufactured by using M-30 grade of Concrete using vibro-compaction process

  • Reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection

  • All the components are joined together with galvanized nuts & bolts, so as to make one composite table & bench

  • Table and bench tops are treated with special anti-corrosive, water proof coating so as to make surfaces glossy and water proof

View Complete Details

Curved Bench S Shape


SPECIFICATION



  • Overall Dimensions: Sitting Platform size - 2825mm length X 400 mm width X 50mm Thickness; Leg size - 400mm Height X 400mm Width X 80/55mm thickness; Sitting height is 450 mm

  • Sitting Platform is in Red colour while the legs are in grey colour

  • Manufactured by using M-30 grade of Concrete

  • Suitably reinforced to promote long use and to prevent damage during handling, transportation & erection

  • Treated with special anti-corrosive, water proof coating so as to make the surface glossy and water proof


View Complete Details

Curved Bench


SPECIFICATION



  • Overall Dimensions:Sitting Platform size - 1200mm length X 350 mm width X 450mm height

  • Sitting Platform is in Red colour while the legs are in grey colour

  • Manufactured by using M-30 grade of Concrete

  • Suitably reinforced to promote long use and to prevent damage during handling, transportation & erection

  • Treated with special anti-corrosive, water proof coating so as to make the surface glossy and water proof


View Complete Details

Rectangular Bench


SPECIFICATION



  • Overall Dimensions: Platform size - 1500 mm length, 450 mm width, 100 mm thickness and 450 mm height with two legs of 150 mm thickness.

  • Sitting Platform is in Red colour while the legs are in grey colour

  • Manufactured by using M-30 grade of Concrete

  • Suitably reinforced to promote long use and to prevent damage during handling, transportation & erection

  • Treated with special anti-corrosive, water proof coating so as to make the surface glossy and water proof


View Complete Details

Cylindrical Stool


SPECIFICATION



  • Stool Dimensions: 400 mm dia X 400 mm Height X 100 mm Seat Thickness X 300 mm Stem Length; Platform - 600 mm x 600 mm x 50 mm thickness

  • Platform is bolted to the stool using 1 nos bolt

  • Seat is in red colour while the stem is in grey colour

  • Manufactured by using M-30 grade of Concrete using vibro compaction process


View Complete Details

Circular Bench With Back Rest


  • Overall Dimensions:Base Sitting Platform Size: 1600 mm dia; Height of back support: 900 mm; Bottom dia. of the base: 1122 mm; Top dia. of the base: 660 mm; Thickness of bench: 50 mm

  • Manufactured by using M-30 grade of Concrete using vibro compaction process

  • Reinforced suitably to promote long use and to prevent damage during handling, transportation & erection

  • Bench top is treated with special anti-corrosive, water proof coating so as to make surfaces glossy and water proof

View Complete Details

Concrete Dustbins

  • Diameter 420 mm
  • Height 750 mm
The dustbin consists of an easy-to-empty fiberglass bin supported on a precast concrete base. This concept is unique because the fiberglass bin has a hemispherical bottom to discourage theft (the bin is not self-standing without the precast base). Moreover both fiberglass bin and precast concrete base have low resale value.
View Complete Details

Cement Flower Pots

  • Overall Height 10 inches (250 mm)
  • Max Width 10" (250 mm)
Colours Available - Natural Gray Concrete or Integral Pigment Colour as per client specification, Drainage Hole Options - No drainage hole (for interior applications) or approximate 1 inch hole, Optional - Bituminous Sealer (suggested for interior applications)
View Complete Details

Seesaw Swing


SPECIFICATION



  • Heavy Duty Seesaw Swing for Outdoor Use

  • Enhances beauty of park/garden

  • Theft proof

  • Low maintenance


View Complete Details

Concrete Spacers

High compressive strength of fiber concrete spacers ensures that the spacers
remain in place before and during concreting (plastic spacers are subject to
deformation under high loads)
Fiber concrete spacers have better bonding with in-situ concrete. As a result
hairline crack formation is discouraged (hairline cracks are often seen where
plastic spacers are used)
Fiber concrete spacers can allow construction of surfaces that are impermeable
to water
Fiber concrete spacers are more cost-effective as compared to plastic spacers
Fiber concrete spacers are fire resistant and not attacked by alkalies
View Complete Details

Pigeon Barriers

KK spikes are made from a composite of stainless steel and UV stabilized plastic. KK spikes are also easy to install with just glue andor screws.
Bird Spikes provides effective and humane control for pest birds and climbing animals on all types of surfaces. These spikes are commonly used by private homes as well as public buildings because they create an unappealing and unstable environment for birds.
View Complete Details

Bird Spike

  • Overall dimensions 13" long
  • wide 6"
  • high 5"
our bird spikes over an approximate length of 300 running feet to solve the problem.The bird spikes were installed to prevent birds from sitting on a wall around a rooftop pool.Each 13 inch strip consists of 20 flat tipped points
View Complete Details

Spike Barriers

Bird Spikes provides effective and humane control for pest birds and climbing animals on all types of surfaces. These spikes are commonly used by private homes as well as public buildings because they create an unappealing and unstable environment for birds.
View Complete Details

Road Light Poles

  • Height 11.5 ft
  • Length 15 feet
INSTALLATION: Light poles are designed for direct embedment into the ground without the use of foundations. After digging a hole, pole is set and the hole is filled with concrete, Mounting Height 11.5 ft; Overall Length 15 feet, Pole Tip Width -128 mm; Pole Butt Width 174 mm, Comes with a conduit that runs along the length of the pole for cable; cable entrance is from the bottom
Provided with a 60 mm tennon pipe at the top for attaching a light fixture
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • K.K.Manhole & Gratings Co.(P) Ltd (K.K.Manhole & Gratings Co.(P) Ltd)
  • 12/16, Sarvapriya Vihar, New Delhi--110016, Sarvpriya Vihar, India
  • Share us via