• FeaturesHook-up Wires , Multi Core Twisted Cables

PTFE Wires, cables are tape wrapped wires having uniform insulation thickness around the central conductor compared to the wires insulated by extrusion process. PTFE is higher grade insulating polymer compared to other fluorocarbons that are used in extrusion process. PTFE Wires, cables have much greater perfection.

K-Flex has developed a special grade XLPE insulated cables(upto 1100 Volts) applications. This is a thermoset type of polymer enriched with crosslinking agent. This is extruded over the conductor using modern extruders and is thoroughly crosslinked under controlled conditions. This XLPE insulation overcomes the drawbacks of PVC hitherto extensively used as an insulating material, without losing any of PVC's desirable properties.

The wires are insulated with a Flame Retardant (FR) PVC compound which helps in restricting spread of fire even at very high temperatures. All wires are subjected to high voltage spark testing to make sure that there are no weak spots in the insulation. This FR PVC compound has a high oxygen and temperature index.

These are the cables especially used to trasmit the under water movements from under water capsule sensors to the concern device on the sea shore. This cable carries one two ducts in built in cable itself which are maintaining the pressure inside the underwater capsule at normal pressure, Normally Nitrogen Gas is used to maintain the pressure inside the capsule. This cable also have self support membrane to hold the weight of capsule without any additional support .

• ApplicationTrunk & Junction Network in hilly areas & Data Link in hilly areas.

Twisted pair cable-with solidfoamfoam skin polythene insulated copper conductor, jelly filled, polythene sheathed, bonded poly-Al moisture barrier, unarmored armored polythene jacket underground cable.

This category 5E, for pair is a high-speed high performance, 100 ohm impedance cable capable of carrying high bit-rate signalling for extended distances in horizontal cabling. Signal amplifiers are not required for a lenght of 328 feet (100 M). Applications can include Voice, ISDN, ATM 155 Mbps, ATM 622 Mbps, 100 Mbps TPDDI, Fast and Giga Ethernet, 100 BASE-T Mbps TP-PMD, 100 Base - T.

These are the cables especially used to trasmit the under water movements from under water capsule sensors to the concern device on the sea shore. This cable carries one two ducts in built in cable itself which are maintaining the pressure inside the underwater capsule at normal pressure, Normally Nitrogen Gas is used to maintain the pressure inside the capsule. This cable also have self support membrane to hold the weight of capsule without any additional support .

K-Flex has developed a special grade XLPE insulated cables(upto 1100 Volts) applications. This is a thermoset type of polymer enriched with crosslinking agent. This is extruded over the conductor using modern extruders and is thoroughly crosslinked under controlled conditions. This XLPE insulation overcomes the drawbacks of PVC hitherto extensively used as an insulating material, without losing any of PVC's desirable properties.

K-Flex flat travelling cables up to 24 core in different sizes viz 1mm2, 1.5 mm2 are the best suited travelling cables for lifts, cable trolleys hoists, cranes escalators etc. The cables are manufactured using a special type of compound which is blend of PVC and Synthetic Rubber. This special compound enables the cable to meet all kind of requirement as per UN Standards and ensures trouble free operations under most rugged conditions. The flat cables are weather proof cables with additional properties of U.V. protection. the cables are smoothly working from -30o C to +50o C atmospheric temperature.

The wires are insulated with a Flame Retardant (FR) PVC compound which helps in restricting spread of fire even at very high temperatures. All wires are subjected to high voltage spark testing to make sure that there are no weak spots in the insulation. This FR PVC compound has a high oxygen and temperature index.

• FeaturesHook-up Wires , Multi Core Twisted Cables

PTFE Wires, cables are tape wrapped wires having uniform insulation thickness around the central conductor compared to the wires insulated by extrusion process. PTFE is higher grade insulating polymer compared to other fluorocarbons that are used in extrusion process. PTFE Wires, cables have much greater perfection.

K-Flex Battery Cables are used in Original Equipment by India's leading vehicle manufacturers. Cables are manufactured from electrolytic grade, bright annealed, bunched, bare copper conductors. These cables are also used in other applications where batteries are used e.g. telecommunication, power, computers, etc. where the D.C. voltage does not exceeds 100 Volts. These cables are long-lasting and ensure proper distribution of power in the vehicle.