Testing Equipment #664441

Manufacturers & Exporters of Inline Emitting Pipe Pressure Tester

used to check the uniformity of water emission at a given pressure from uniformly integrated emitters in;

A) Unregulated Emitting pipes (Emitting pipe whose emission rate varies with inlet water pressure.) and

B) Regulated Emitting Pipes (Emitting pipe of relatively constant emission rate at varying water pressure levels at the emitting pipe inlet, within the range of operating pressure specified by the manufacturer.)

Specification :

• Specimen fitting nos : 5 nos pipes and each pipes having 5 emitters.
• Pipe size : 12mm, 16mm & 20mm.
• Size of machine : 80 X 36 X 60 ( Approx)
• Material construction : SS 304 and Rigid MS angle structure.
• Pressure indication : Through Digital pressure indicator with resolution of 0.01 kg and digitally calibration facility.
• Timer : Digital timer with buzzer alarm facility.
• Test specimen nos : 25 emitters with the max distance of 60cms.
• Pressure : Through Reputed make water Pump with manifold and ball valves system.
• Electrical Power Supply : 230 V AC. 50 Hz

Easy rack system to move cylinder tray immediate after completion of test for precise results.

The Crush / Compression tester is used to check whether the sample withstands crushing / compression load. This is one of the mechanical properties which need to be checked for the stress likely to occur during transportation, storage etc. as per the given standard.

Specification :

• 0-500kgs load with Resolution of 0.1 kg
• Digital Display Instrument for load Indication
• Geared Mechanism
• 440 Volt AC 50 Hz.
• Table Top Model
• Paint : Powder Coating

Manufacturers & Exporters of PET Bottle and Jar Top Load Tester

Top Load Test is a test carried out to measure the maximum load at which the buckling of PET bottles, Plastic Containers, Buckets etc. happens. Top Load Test is a measurement of ability of material to withstand forces that tend to pressure applied and to determine to what extent the material withstands pressure before buckling occurs.

Specification :

• Load Capacity : 500 Kg.(Resolution 0.1 Kg)
• Compression Through : 2 Nos. 400mm x 200mm x 12mm thick plates
• Maximum distance between Two Plates : 350 mm or as per your requirements.
• Speed : Variable with AC frequency drive with geared motor.
• Height : Adjustable As Per Sample.
• Paint : Powder Coating.
• Power : 230V Ac, 1 Phase, 50 HZ.
• Microprocessor based load indicator: Accuracy of 0.05% of load indicated
• Newton or Kg. can be selected.
• Load cell I/P one

Manufacturers & Exporters of Melt Flow Index Tester

Melt Flow Index Tests measures the rate of extrusion of a thermoplastic material through an orifice of specific length and diameter under prescribed condition of temperature and pressure. This test is used as a means of measuring the uniformity of flow rate of the material. With the help of this test we can distinguish between the different grades of polymer.

Specification :

• Temperature Controller : Microprocessor based Digital temperature Controller with range up to 400C, resolution up to 0.1C & accuracy of 0.1% F.S.D.
• Timer : Microprocessor based Digital Timer with range up to 999.9 seconds and having preset facility and buzzer output.
• Weights : 2.16 Kg & 5 Kg hard chrome plated weights.
• Accessories : Orifice, Piston, Material charger, Barrel cleaner, Orifice cleaner, Sample Cutter.
• Paint : Powder Coated.
• Power : 230V AC.

Manufacturers & Exporters of Conduit Bending Tester

Conduit Bending Tester is used to check whether the sample withstands Bending load. This is one of the mechanical properties which need to be checked for the stress likely to occur during Installation etc. as per the given standard.

Specification :

• Pipe Clamping Device to Test Bending Test for 20mm, 25mm, 32mm & 40mm pipe dia.
• Bending Rollers for 20mm, 25mm, 32mm & 40mm pipe dia.

Manufacturers & Exporters of Vicat Softening Point and Heat Deflection Tester

The "Kaiser" Hydrostatic Pressure Testing Machines are used to find out the resistence to internal pressure of R-PVC, C-PVC, U-PVC, MDPE, HDPE, LLDPE, Pipes, Fittings, Valves etc. as per IS, BS, ASTM and other equivalent standards. The "Kaiser" Pressure Testing Machines are designed keeping versatility in mind to perform with different applications as specified in international Standard. Kaiser's computerized model is suitable for many praecox applications of Gas pipes, Hosepipes and for the organisations with quality & quantity manufacturing base of above products.

STANDARDS :

IS 4984, IS 4985, IS 12786, IS 14333, IS 14151, IS 15328, IS 15801, EN 921:1994, ASTM D 1785

UNIQUE FEATURES OF MACHINE SOFTWARE:

• Facility of kg/cm vs Time graph & Pressure v/s. Real time tabular column on one screen
• Facility to convert and print result into kg/cm, Bar & mpa
• Facility to export and print tabular column to excel format
• Facility to view Graph and tabular column of 8 stations online on single screen
• Two side communication facility is available in software
• Get graph of every one or four minutes interval
• On line update facility
• Colour Combination can be changed
• Line, bar chart, Dotted line, etc facility in graph
• Graph Grids Colour Combination facility
• Graph Zooming Facility
• Individual Portion Zooming facility
• Com Port Auto Selectable
• Company Logo Inserting facility
• USB Drive Facility for Safety Features
• Can generate print report with individual company logo

Tensile test is a measurement of ability of material to withstand forces that tends to pull it apart and to determine to what extent the materials stretches before breaking

STANDARDS

ASTM D 638, D 882, D 790, D 695, ISO R527, BS 2782 and other equivalent standards, Load Measuring System as per ASTM E4, ISO 7501. Strain Measuring System require as per ASTM E83

APPLICATION

Tensile is the universal test applied to many polymers to check the mechanical properties and it is the most improtant property as majority of end use application involved some degree of mechanical loading & properties like Tensile Modulus, Elongation, Compression etc. are calculated using this machine

USP

The "Kaiser" has some unique models of Tensile Testing developed with versatility in mind. Kaiser UTM's can be used with or without using P.C. Universal Software capable of performing test on any type of materials.

Safety provisions in form of software, Electrical & Mechanical features.

Test on high & low loads with different cross head travel speed can be performed.

The "Kaiser" tensile Testing offers testing flexibility and ease of use via an intelligent electromechanical system data transfer. ratio of load cell to instrument is 24 bits to give instateneous readout of data during process. The Kaiser versatile software helps to visualize the process and behavior of materials in form of data and graphs with all the calculated results required. Units of weights "Newton" or "Kilograms" can be selected from software. Round or of any different shape materials can be presp

UNIQUE FEATURES OF TENSILE TESTING MACHINE SOFTWARE:

• On line update facility
• Colour combination can be changeable
• Line, bar chart, Dotted line, etc facility in graph.
• Graph Grids colour Combination Facility.
• Graph Zooming Facility.
• Individual Graph facility for Tensile, COF, ICOF, Compression & Flexural
• Individual Portion Zooming Facility.
• Individual graph Comparison facility.
• Result Convert Facality in Graph & Excell Formate
• Graph Overlapping Facility for analysis Material Property.
• Comport Auto Selectable.
• With in Second we get the Result in Kg. / cm2 and Nt. / mm2.
• Auto Scaling and fix scaling Facility.
• Company logo inserting facility.
• USB Driver Facility For Safety Features.
• Two way Communication Facility.
• Can generate the report with your company logo.

This procedure is used for measuring the tear strength of the thermoplastic films or non-rigid sheet. By this test method, we determine the average force to propgate tearing through a specified length of plastic film or non-rigid sheeting.This test method is of value in ranking relative tearing resistance of various plastic film and this sheeting of comparable thickness.

Kaiser Carbon Black Dispersion Tester is used to find out the dispersion of additives e.g. pigments, fillers in plastics. In plastic material, pigment and fillers play a very important role for matching the uniform colours as well as resistance against UV Light. This equipment is also useful for determination of surface defects, voids, bubbles filler distribution and other structural investigation.

Kaiser Carbon Black Content Tester is used to determine the average carbon black content in materials like plastic pipes, films, sheets, cables, water tanks.