Expansion Joints

We offer a complete product range of Expansion Filler Joint, Cap Seal Expansion Joint (Omega Seal), Bridging Seal Expansion Joint and PVC Expansion Joint

Expansion Filler Joint

Copper expansion joint (2 mm thick) shall be placed slightly below the wearing coat.
Compressible fiber (20 mm thick) shall protect the edges of the copper expansion joint.
Filler Joint (20 mm thick) shall fill the gap upto the top level of the wearing coat.
Sealing compound shall be applied both top and bottom for the perfect fitment.

View Complete Details

Ask Latest Price & Details

Cap Seal Expansion Joint (Omega Seal)

Surface shall be 1% slope in order to get water drained as shown in figure.
Steel bolt shall be inserted into the recess made in the deck and to be filled with M 35 grade concrete.
Kantaflex cap seal to be positioned on both sides of the decks such a manner that the omega shape covers the gap and the plain surface are perfectly sat on the deck slab.
Galvanized steel plate(80 X 80mm) having oblong hole (40 X 20mm) to be placed on the plain surface of the seals at both sides , such a manner the bolt is inserted through the oblong hole.Seal also to be punched with a hole suiting to oblong hole of the steel plate to enable to get inserted through the bolt.
Nut to be tightened on every bolt properly and tack welded to ensure the locking.
On completion of installation, every aspects to be checked for proper installation.
Wearing coat shall be done with proper care without disturbing the seal.

View Complete Details

Ask Latest Price & Details

Bridging Seal Expansion Joint

Special type of steel bolt shall be inserted into the recess made in the deck and to be filled with M 35 grade concrete.
Kantaflex bridging seal to be positioned on both sides of the decks such a manner that the cup shape of bridge seal covers the gap and the plain surface are perfectly sat on the deck slab.
Galvanized steel plate 20mm thick having hole to suit special type of nut & bolt to be placed on the plain surface of the seals at both sides , such a manner the bolt is inserted through the hole.Seal also to be punched with a hole suiting to hole of the steel plate to enable to get inserted through the bolt.
Nut to be tightened on every bolt properly and tack welded to ensure the locking.
On completion of installation, every aspects to be checked for proper installation.
wearing coat shall be done with proper care without disturbing the seal.

View Complete Details

Ask Latest Price & Details

PVC Expansion Joint

Kantaflex P.V.C. expansion joint shall be placed slightly below the road surface.
Expansion filler joint (20 mm thick) shall be insertedin the gap of either side.
Sealing compound shall be applied both top and bottom for perfect fitment.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back