Other Products / Services #331531

We manufacture connecting rods, using qualitative raw materials such as steel, aluminum, titanium, cast iron etc. These are used in automotive internal combustion engines & motor scooters etc. Our range is also used to connect piston to the crank or crankshaft.

Cast iron piston rings 23mm to 400mm Dia covering all indeginous and foreign engines. Any type of rings can be manufactured against samples or drawings. Crown International Piston Rings are made from high quality Grey C.I. Castings (Individual Casting) with an ideal combination of free and combined carbon to provide prolonged working life. The casting used has a very fine grain to provide high tension even at elevated temperatures of high-speed engines.

Air Compressor Valves are made from grey cast iron alloy with high Phosphorous content to provide high wear resistance and improves working properties in poor lubrication conditions. Air Compressor Valves are made to accurate dimension as per OE standards and the inner bore is also finished to Perfect size, not usually done by Competitors.

Our range of connecting rods, steel connecting rods, carbon steel and alloy steel connecting rods are finds application in automotive engines. These are quality tested & available for construction of automobiles of Perkins, Ford, Mercedes Benz, Toyota, Mitsubishi, Isuzu, Suzuki, Fiat, Caterpillar, Deutz and Lombardini.

We offer spring pin & shafts. This spring and shafts is made with quality materials

Our range of connecting rods, steel connecting rods, carbon steel and alloy steel connecting rods are finds application in automotive engines. These are quality tested & available for construction of automobiles of Perkins, Ford, Mercedes Benz, Toyota, Mitsubishi, Isuzu, Suzuki, Fiat, Caterpillar, Deutz and Lombardini.

We offer a wide range of engine mountings, automotive engine mountings, engine mountings big, engine mountings small & rubber parts, which are extensively used in automotive industry. These range can be customized as per the requirement of our customers and are available at industry leading price.

We bring forth an ample range of superior performance U J Cross that is available in various sizes and dimensions. Our Universal Joint Cross is manufactured from finest quality raw materials as per the models of all kinds of European, American & Japanese Vehicles. Easy to install, our Automotive UJ Cross is anti abrasive and non corrosive in nature. We have carved a niche as one of the prominent Automotive UJ Cross Manufacturers in India.

We manufacture kit for brake parts which is required while repairing the brake assembly. These kits are available in different sizes for different brake assembly. These kits are not only made to suit our own products but also for the other available assemblies in the market. These kits we manufacture are also used in Brake Cylinder, Clutch Cylinder, Hydraulic Parts, Wheel Cylinder and Master cylinder.

Extension springs, torsion springs, flat springs, wire forms and other spring products, retaining rings and clock type springs.

Dowell Pins, Disc Washers, Snap Rings, Washers, Shims, Supporting Rings, Preloading Washers, Spacers, Crescent Rings, Plain Washers, Wave Washers, Spring Dowels, Roll Pins, Solid Pins, Clamping Sleeves etc.

Cylinder Liners manufactured by the "Centrifugal Cast Process" is acknowledged to be the best method. In the centrifugal casting process, the molten metals is poured into a metal mould or die which is revolving at a high speed. The centrifugal force causes the metal to distribute itself evenly around the die. Crown International also manufactures Centricast Liners, Centrifugal Liners and Chromed Bore Liners for automobile applications

crown internationalintake and exhaust valves are made from different materials to operate under different conditions. These are made from high grade valve steel series - en18d, en24, en52, en54, en59(214n) (non-magnetic/bimetal). Engine valves are also made with chrome plating for special purpose and are available in over sizes. The hardness of the valve series varies from 20hrc to 50hrc according to the material used and the application of the valve.

sophisticated manufacturing processes utilized are supported by quality assurance procedures at every production step right from incoming steel to product packaging.

materials:-the standard precicomp valve plate and reed material is of aisi-420 stainless steel which provides uniform high hardness.

.

Our range of air filter is used to remove contaminants & solid particles such as dust, pollen, mold & bacteria from air. Furthermore, our products are widely applicable in internal combustion engines, gas compressors, diving air compressors, gas turbines etc. Our products are available at industry leading price.

Cylinder Head Gaskets are manufacture in various materials like Copper, Steel, and Beater etc. These are also manufacture in Asbestos material as well as Non-Asbestos materials. Cylinder head gaskets are covered with silicon sealer and silicon Non-Stick coatings.

We manufactures and holds large stocks of compression springs, extension springs, torsion springs, flat springs, wire forms and other spring products, retaining rings and clock type springs. All springs can be produced in a wide range of materials and finishes and we can custom manufacture your own unique springs and wireforms

We offer UJ cross, which are used in cars, truck and other vehicles. These are available at competitive price and can be customized as per the requirement of our customers

We bring forth the finest quality Nozzles in the market. The Water Spray Nozzles made available by us are fabricated by high quality brass and SS 304. Our Brass Water Spray Nozzles offers durable and hassle free performance for a longer period of time. Nozzles are used for creating pressure for the effective spraying of oil and water. The spray angle of these nozzles is of approximately 80 to make more effective.

We offer cutter blades, which are qualitative and are used in different industries. These are used on all types and models of wood cutting machine, grass cutting & agricultural power spray machine.

We manufacture Disc Blades from Boron Steel, SAE 1070 steel, SAE 1080 steel, and Chrome Manganese steel

Different types of bolts we manufacture are Center bolts, Hub bolts, U-bolts, Hex bolts, Spring bolts, Shackle bolts, Nuts, Long bolts and Stud bolts etc.

Crown International Is A Main Foundry of Casting Bucket Teeth and Adapters , Side Cutter, Lock&Pin for Jcb, Caterpillar, Komatsu, Hitachi, Hyundai, Daewoo, Esco, Case, Kobelco, Volvo, Tata, John Deere Earthmover Machineries Etc.

We manufacture brake hose from qualitative elastomers that have excellent resilient capacity. Available in different sizes, our brake hoses are used in various automobiles. If specified by clients we also provide heat shields with brake hoses.

• Cast Iron Rings :These rings are made from graded Prelatic Cast Iron alloy. Machined to close tolerances as recommended by O.E. (Original Equipment)
• Steel Ring Chrome Plated :These rings are made of high Tensile special steel machined to proper sizes with Chrome plating from 100 to 200 microns as required by the buyers. This is used in Heavy Duty Diesel Engines.
• SG Iron Casted Rings :These rings are made of SG Iron castings and recommended for Heavy Duty Diesel Engines, specially 3 ring design Piston.

We are a world class manufacturers of Circlips, E-clips, Dowell Pins, Disc Washers, Snap Rings, Washers, Shims, Supporting Rings, Preloading Washers, Spacers, Crescent Rings, Plain Washers, Wave Washers, Spring Dowels, Roll Pins, Solid Pins, Clamping Sleeves etc

We manufacture our liners, using graded cast iron & centrifugal casting etc. These are available at hardness of the material, 80-85 HRB (20mm-300mm). Further, our range is of industry leading price.

Crown InternationalOffers a full range of application-engineered reciprocating compressor valves that combine the highest possible flow efficiency with maximum service life. The France offers a complete line of premium quality valves to satisfy most application requirements.

Valve Guide are made from grey cast iron alloy with high Phosphorous content to provide high wear resistance and improves working properties in poor lubrication conditions. Valve Guide are made to accurate dimension as per OE standards and the inner bore is also finished to Perfect size, not usually done by Competitors.

An Engine Mount the base to every engine in a vehicle, we manufacture our engine mounts with only fresh metals, virgin rubber, graded nut-bolts and adhesive. We begin the manufacturing process by reverse engineering mount to determine the strength of each mount as well as the chemical compounding and metallurgy used to manufacture it. Both natural and synthetic rubber are used depending upon the application of the product. Rubber compounds are designed to have high ozone resistance to give each mount with maximum longevity.