The Supreme SAFEGARD Septic Tanks are designed to provide a better substitute to existing conventional brick and mortar septic tanks. The conventional septic tanks are associated with multiple problems of concrete corrosion (effects of H2S) and leakages thereby creating pollution of soil and ground water. The life span is short and uncertain. On the other hand Supreme SAFEGARD septic tanks are free from above problems and has many outstanding features viz: -    Robust design with great strength -    Simple and quick installation -    Complete corrosion & chemical resistance -    Hygienic and safe with 100% water tightness ensuring complete leakage protection -    Free from infiltration and ex-filtration and hence guarantees prevention of soil and ground water pollution. -    Economical with minimal maintenance -    Long life: expected to last over 50 years under ideal conditions i.e. life time of the building. -    Safe against anti –flotation. -    No root penetration, eco-friendly and may be classified as green product. -    Conforms to various National /International standards, building code and regulations. -    Available in various capacities M/s Deepika Rotomoulders is a well renowned water tank manufacturer offering an impressive range of water storage tanks for domestic as well as commercial use. Our tanks have unique dual advantage of being light in weight and much stronger than other oridinary tanks existing today. Due to commitment to provision of quality products and sevices at reasonable costs, our products have received wide acceptance in the market. The leading brand “Kaveri” Water storage tanks are manufactured by M/s Deepika Rotomoulders Pvt Ltd with ISI mark for product ranging from 200 Ltrs to 20000 Ltrs. Our products are registered with DGS&D, NSIC, MES, Karnataka State Police Housing Corporation, CPWD, BSF etc. Apart from ISI marked tanks, we manufacture a range of commercial tanks like Double Layer, Triple Layer, Colour tanks(Triple Layer), House hold drums, Loft tanks , Sump tanks, Chemical containers, Industrial containers, Heavy duty Plastic Pallets, Processing Trolleys etc conforming to our standard specifications.

We have DI pipes of all ranges/sizes from leading brands in India for pressurized water supply applications. Ductile Iron is an alloy of Iron, Carbon and Silicon. If we observe the micro structure of grey caste iron, we will notice that graphite present in it is in the form of flakes. In the year 1948, the flakes structure of graphite was modified by adding magnesium to the molten metal. The resultant product of iron is now typically known as Ductile Iron. Ductile Iron Pipes have higher tensile strength, yield strength, ductility and impact resistance which are the reasons why the use of Ductile Iron Pipes has grown up at a rapid rate over the last 50 years or so. We primarily offer metallic zinc sprayed pipes with a finishing layer of bituminous paint (with fillers). Other special type of external coatings and linings which are available include External Coatings: -    Metallic Zinc coating having an average mass of 130gm/sq.m with finishing layer -    Metallic Zinc-alloy coating having a minimum mass of 200 g/m2 with finishing layer -    Extruded polyethylene self adhesive tape wrapping at factory/at site -    Reinforced cement mortar coating having a nominal thickness of at least 5 mm -    Fusion bonded epoxy coating -    Polyurethane coating Linings: -    Cement mortar lining & thicker mortar lining as per the customer requirement -    Cement mortar lining with seal coat -    Two pack of epoxy lining as a supplement to cement mortar lining -    Polyurethane lining

We are offering finest quality and wide range of PP Compression fittings and Electro fusion fittings for house service connections from leading International and Indian brands .

Double Wall Corrugated ( DWC ) HDPE pipes are ideal for cable ducting due to its crush strength, bending radius and superior pulling ability. They are also unaffected by future road constructions, unanticipated digging work and rodents. These pipes that comply with IS 14930 are an asset to the telecommunications and railway industry helping to protect its expensive infrastructure installations. They protect high-bandwidth telecom cables and railway lines which allows them to lie underground for years.   Advantages   Non conducting : not susceptible to galvanic corrosion or electrical interference Low coefficient of friction : Simplifies field installation due to lower cable stress Excellent strength : withstands constant heavy overload pressure Flexible: fewer joints, does not break and adaptable to ground heaves and shifts Lightweight : reduces cost and aids in installation Moisture proof and Watertight : complete cable protection Chemical resistance : Extended outdoor storage life Immune to bacterial or fungal growth : impervious to insect attacks Color coded : easy to identify   Applications     Used in highways, housing developments, special economic zones, commercial projects, retail and industrial infrastructure applications ->    Low tension electric underground cable protection ->    Communication underground cable protection ->    Railway signaling cable protection ->    Indoor ventilation systems ->    PEX plumbing pipes protection

Piping made from polyethylene is a cost effective solution for a broad range of piping problems in municipal, industrial, marine, mining, landfill, duct and agricultural applications. It has been tested and proven effective for above ground, surface, buried, slip lined, floating, and marine applications. High-Density Polyethylene Pipe (HDPE) can carry potable water, wastewater, slurries, chemicals, hazardeous wastes, and compressed gases. In fact, polyethylene pipe has a long and distingu ished history of service to the gas, oil, mining and other industries. It has the lowest repair frequency per mile of pipe per year compared with all other pressure pipe materials used for urban gas distribution. Polyethylene is strong, extremely tough and very durable. Whether you're looking for long service, trouble-free installation, fle xibility, resistance to chemicals or a myriad of other features, high-density polyethylene pipe will meet all your requirements. Smooth-wall High-Density Polyethylene pipe systems These pipes are manufactured conforming to IS 4984, IS14333, ISO4427 with latest revision. We have the entire range of Pipes starting from 20mm to 1000 mm dia Pipes in PE63, PE80 and PE100 grades with all kinds of Fittings and accessories

-    Pipes manufactured from peroxide cross-linked polyethylene (PE-Xa) using the Engel method acc. EN ISO 15875, for supply lines, rising mains and connection lines for plumbing. Fire classification E according to DIN EN 13501-1. -    Classification of service conditions acc. to EN ISO 15875: -    Application class 2 - Hot water supply (70°C), malfunction temperature 95°C.

Double Wall Corrugated ( DWC ) HDPE pipes are ideal for cable ducting due to its crush strength, bending radius and superior pulling ability. They are also unaffected by future road constructions, unanticipated digging work and rodents. These pipes that comply with IS 14930 are an asset to the telecommunications and railway industry helping to protect its expensive infrastructure installations. They protect high-bandwidth telecom cables and railway lines which allows them to lie underground for years.   Advantages   Non conducting : not susceptible to galvanic corrosion or electrical interference Low coefficient of friction : Simplifies field installation due to lower cable stress Excellent strength : withstands constant heavy overload pressure Flexible: fewer joints, does not break and adaptable to ground heaves and shifts Lightweight : reduces cost and aids in installation Moisture proof and Watertight : complete cable protection Chemical resistance : Extended outdoor storage life Immune to bacterial or fungal growth : impervious to insect attacks Color coded : easy to identify   Applications     Used in highways, housing developments, special economic zones, commercial projects, retail and industrial infrastructure applications ->    Low tension electric underground cable protection ->    Communication underground cable protection ->    Railway signaling cable protection ->    Indoor ventilation systems ->    PEX plumbing pipes protection

-    Pipes manufactured from peroxide cross-linked polyethylene (PE-Xa) using the Engel method acc. EN ISO 15875, for supply lines, rising mains and connection lines for plumbing. Fire classification E according to DIN EN 13501-1. -    Classification of service conditions acc. to EN ISO 15875: -    Application class 2 - Hot water supply (70°C), malfunction temperature 95°C.

Piping made from polyethylene is a cost effective solution for a broad range of piping problems in municipal, industrial, marine, mining, landfill, duct and agricultural applications. It has been tested and proven effective for above ground, surface, buried, slip lined, floating, and marine applications. High-Density Polyethylene Pipe (HDPE) can carry potable water, wastewater, slurries, chemicals, hazardeous wastes, and compressed gases. In fact, polyethylene pipe has a long and distingu ished history of service to the gas, oil, mining and other industries. It has the lowest repair frequency per mile of pipe per year compared with all other pressure pipe materials used for urban gas distribution. Polyethylene is strong, extremely tough and very durable. Whether you're looking for long service, trouble-free installation, fle xibility, resistance to chemicals or a myriad of other features, high-density polyethylene pipe will meet all your requirements. Smooth-wall High-Density Polyethylene pipe systems These pipes are manufactured conforming to IS 4984, IS14333, ISO4427 with latest revision. We have the entire range of Pipes starting from 20mm to 1000 mm dia Pipes in PE63, PE80 and PE100 grades with all kinds of Fittings and accessories

Double Wall Corrugated ( DWC ) HDPE plastic pipes are used all over the world as a standard in efficient sewage and drainage systems since the last 40 years. , from ALOM, is a pipe of the finest quality for non-pressure underground sewerage, drainage and cross drainage (pipe culvert) purposes. These pipes will help municipalities, urban conglomerates and industries manage their waste water and rain water very efficiently. Such a system will not only protect the environment but also your investments. Once installed, the pipes are maintenance free and will lie underground for years.   Advantages   Environmentally safe : No leaks, no cracks and no damage to environment and soil   Socio-environmental friendliness : No leaks, no cracks and no damage to environment and soil   Long Lasting : Service life of over 100 years   Cost effective: Uses minimal material for equal strength   Ease of Installation : Uses fewer manpower and can be installed in very constrained locations   Chemical Resistance : Chemically inert to waste water ingredients and ‘crown corrosion’ is non-existent     Application   City and urban clusters : Economical, easier and swifter installation, handling and transportation to overcome socio-environmental issues with underground pipe installations.   Urban sewerage rehabilitation : Economically most viable in crowded and haphazardly grown old core clusters of the city   Highway and busy roads : Anti leakage coupling to create environment friendly and virtually maintenance free drainage corridors   Earthquake prone areas with high tectonic movements: high strength to weight ratio and adaptation of pipe length and roundness to uneven ground or earth movements.   Rainwater drainage : (agricultural, highway and citywide) locations  

Construction: -   Industry-specific design: suitable for all applications found in the water and waste water industries -   Widest flow range, highest accuracy: diameters from 15mm to 2200mm (0.5 to 84 in.) -   Submersible sensor: suitable for flooded chambers and pits -   Buriable sensor: eliminates chambers and ensures fast, low-cost installation -   Hazardous area approvals:– FM, CSA, ATEX, – ideal for waste water treatment works -   2-year warranty as standard: high-quality product guarantees reliable, maintenance -free operation -   CalMaster compatible; in situ verification of flow meter calibration -   Remote communications: including Profibus DP v0

-   Pipes manufactured from peroxide cross-linked polyethylene (PE-Xa) using the Engel method acc. EN ISO 15875, for supply lines, rising mains and connection lines for plumbing. Fire classification E according to DIN EN 13501-1. -    Classification of service conditions acc. to EN ISO 15875: -    Application class 2 - Hot water supply (70°C), malfunction temperature 95°C. Design pressure 10 bar. -    Conduits manufactured from high density polyethylene