Roofing Insulation - INSU Reflector(formerly Sil Radiant Shield)

Roofing Insulations like Glass Wool & Rock Wool insulations

INSU Reflector(formerly Sil Radiant Shield)

INSUreflector is a radiant reflective insulation material made of polythylene air bubble film (ABF) laminated with aluminum foil on one or both sides. It is a low e-reflective insulation material with a low mass to air ratio, which effectively blocks the radiant heat transfer. The bright surface of the aluminium foil, which encases the FR polyethylene air bubble material, reflects 96% to 99% infra-red radiation received by the surface of the heated slated roof. The placement of the radiant barrier shall be in a manner to provide an air space below the roofing sheets or between vertical cladding for its effective utilization.

Features & Benefits

High reflective value-Reflects 96% to 99% of radiant heat
Unaffected by alkalis, alcohols, detergents, petrochemical products and most mild acids
Non-toxic and fiber free-Environment & User Friendly
Negligble water vapour transmission even after 28 days
Corrosion resistant
Fire Characteristic-Conforms to BS 476 Part 6 & 7. Class 'O' & Class 1 Category respectively
Excellent tensile strength; puncture and tear resistance
Non-carcinogenic. Chemically inert and does not any formaldehyde or other combustible Volatile Organic Compounds(VOC)
Industries

Pharmaceuticals
Industrial and Poultry sheds
Textile Mills
PEBs
Airports
Logistic warehouses
Skating Rink
Manufacturing units and many more

Application

Underdeck Insulation
Wall Insulation
Available in

One side aluminium foil and other side milky white film
Both side Met Pet
One side Met Pet and other side aluminium foil
Rolls of 75 mtrs. length & 1250 mm width

Under Duct Insulation - Fevicol Kwik Grab

Fevicol kwik grab is a high strength multipurpose adhesive to bond almost all materials.

Applications

For bonding AC vent concrete


Features and Benefits

Gives instant grab and forms a long lasting elastic bond.
Fast drying to ensure strong bond.
Easy to use and apply

New York Wire - Vinyl Coated Fiberglass Mesh (Insect Screening)

We are a leading Supplier of New York Wire such as Vinyl Coated Fiberglass Mesh (Insect Screening), Aluminum Mesh Insect Screening and Arma Sound from India.


Vinyl Coated Fiberglass Mesh (Insect Screening)

Vinyl Coated Fiberglass Mesh (Insect Screening)
Name Vinyl Coated Fiberglass Mesh
Primary Use Insect Screening
Mesh 18 x 16 +/-1
Yarn Diameter .028 cm nominal
Widths Optional
Lengths Optional
Colors Gray, Charcoal, others available
Fabric Weight (nominal before heat treatment) .11 kg / m2
% fiberglass 37
% vinyl coating 63
Fiberglass Type ECG 150 input yarn
Coating Type Plasticized polyvinyl chloride
Coating Formulation Proprietary
% Open Area (nominal) 66

Hot Insulation - Friction Fibres

Leveraging on our industrial expertise, we offer a huge collection of hot insulation products. These products are used in various segments for different insulation applications. Its prominent features include good thermal resistance, excellent chemical resistance, fine heat resistance and dimensional stability. All the hot and cold insulation products can be customized according to clients specifications.

Friction Fibres
Application:


Friction Fibres are used in non-asbestos organic formulations for friction products, such as railway brakes, commercial vehicle and passenger car linings and disc pads , clutch facings etc., Both wet and dry mixes can be used.
It has excellent performance characteristics, and offers distinctive advantages over traditional filler / reinforcing materials.

Advantages:

High Temperature Stability:
Rockinsul Friction Fibres have low conductivity and high heat resistance, preventing rapid overheating and improving brake life.
Moisture Resistance:
Rockinsul Friction Fibres are non-capillary and non-hygroscopic, giving good moisture resistance.
Low Shot Content:
Rockinsul Friction Fibres have shot content generally less than 3%.
Hardness and Noise:
Less abrasive than glass, ceramic and steel fibres.

Packing:

Friction Fibres are packed in HDPE bags. Other packing available on request.

Roofing Insulation - Rock Wool Building Roll

Roofing Insulations like Glass Wool & Rock Wool insulations

Rock Wool Building Roll
Application:
Building rolls are designed mainly for the thermal insulation of roofs and walls. These high temperature resistant rolls are suitable for use in pre engineered buildings, pre fabricated houses, poultry farms, HVAC ducting etc. It is also used for roofing insulation or thermal & acoustic insulation over false ceilings.
Service Temperature: It can withstand temperatures upto 750 C.
Fire-Safety: Non-combustible when tested to BS 476.
Facing: Faced with reinforced aluminium foil.Other facings available on request.
Thermal conductivity: Product shows remarkably low thermal conductivity values when tested in accordance with BS 874 : 1986. R value for thermal resistance is 1.56m.k/w, at 10C for 50mm thickness.
Moisture: Does not absorb any moisture from the air. Moisture has no effect on the stability of the building roll.

Fibreglass Tissue

Our wide range of thermal insulation products are manufactured using various qualitative materials. All the products provide optimum comfort to the users and assist in the protection of environment. These products cater to the needs of auditoriums, conference halls, cinema halls, multiplexes and many others. The entire product range can be customized as per the specific requirements of our clients.

Fibre glass tissue products are widely acknowledged for its features of:
Durability
High heat resistance
Good thermal conductivity
Its application areas includes water proofing, treatment of under ground pipe lines, inner & outer wrap and many others.

Leveraging on our industrial expertise, we offer a huge collection of hot insulation products. These products are used in various segments for different insulation applications. Its prominent features include good thermal resistance, excellent chemical resistance, fine heat resistance and dimensional stability. All the hot and cold insulation products can be customized according to clients specifications.

Rock Wool Slabs
Applications:

Rock wool Slabs are designed for a wide range of applications, at both high and low service temperatures. It can be used on flat or slightly curved surfaces for thermal and acoustic insulation. They are also suitable for thermal insulation of ducts, large vessels, cavity wall, curtain wall and sandwich panels.

Service Temperature:
Slabs when tested in accordance with DIN 52271 can withstand temperatures up to 750 C.
Fire-Safety:
Slabs are non combustible when tested in accordance with BS - 476 Part 4 and ASTM E -136.
Facing:
Slabs are available with Black glass tissue, Reinforced aluminium foil, Kraft paper and Glass cloth facings.
Thermal Conductivity:
Slabs show remarkably low thermal conductivity values, when tested in accordance with BS 874 : 1986.
Moisture:
Non-hygroscopic and non-capillary, it does not absorb any moisture from the air nor does moisture have any effect on the stability of the slabs.Water repellent slabs available on request.
Density:
Available from 48kg/m - 200 kg/m densities, and size of 1.0 meters x 0.6 meters. Non-standard sizes available on request.
Packing:
Slabs are packed in HDPE bags.

Leveraging on our industrial expertise, we offer a huge collection of hot insulation products. These products are used in various segments for different insulation applications. Its prominent features include good thermal resistance, excellent chemical resistance, fine heat resistance and dimensional stability. All the hot and cold insulation products can be customized according to clients specifications.

Rock Wool Mattress
Applications:

Rock Wool Mattress are made from lightly resin Bonded rock fibers with wire mesh machine stitched and Machine lay on one side used in boiler, equipment vessel tank, chimney, ESP, pipe & fitting. Duct & other industrial applications:
Operating Temp: Up to 700 C
Sizes : Mattresses in the size of 1.22 mX1.52 m with wire mesh machine
Density : 100, 120, & 150 Kg/m3
Thickness: 25, 40, 50, 65, 75 & 100 mm

Application:


wired mattresses conform to ASTM C - 553, C - 592 and BS- 3958 part 3. It is used in the thermal insulation of large vessels, boilers, small machinery, equipment, ducts, flanges, valves and plants operating at high temperatures.


Service Temperature:
Has a service temperature of 750 C when tested in accordance with
DIN -52271, and ASTMC - 411.


Fire-Safety:

Non-combustible when tested in accordance with BS - 476 part - 4 and ASTM E - 136. Class1 when tested in accordance with BS - 476 part 7, (ASTM E- 84).


Facing:

wired mattresses are available with wired mesh on one or both sides in SS or GI.


Moisture:

Non-hygroscopic, non-capillary and does not absorb any moisture from the air. Moisture has no effect on the stability of the mattresses.



Density:
Available in densities from 70kg/m to 150kg/m in standard width of 1.22meters and length of 1.64meters. Non - standard sizes available on request.



Packing:
mattresses are packed in HDPE bags. .

Cold Insulation - Polyurethane Foam

Leveraging on our industrial expertise, we offer a huge collection of hot and cold insulation products. These products are used in various segments for different insulation applications. Its prominent features include good thermal resistance, excellent chemical resistance, fine heat resistance and dimensional stability. All the hot and cold insulation products can be customized according to clients specifications.


Polyurethane Foam
Our range of finest quality Polyurethane Foam products are immensely used as a vehicle seat squab and bedding because of outstanding cushioning & heat retaining properties. These products are used in different industries and can be customized as per clients specific requirements. Polyurethane foam is available in slabs & pipe section, low thermal conductivity, low smoke emission and low water vapour permeability qualities are ideal for building & industrial insulation.
Operating Temp : - 200 C to 150 C
Sizes : Slabs 1m X 0.5 m/ Pipe section to suite lines having 25 mm to 350 mm Dia meter.

Cold Insulation - Twiga Flexible Duct

Leveraging on our industrial expertise, we offer a huge collection of hot and cold insulation products. These products are used in various segments for different insulation applications. Its prominent features include good thermal resistance, excellent chemical resistance, fine heat resistance and dimensional stability. All the hot and cold insulation products can be customized according to clients specifications.

Twiga Flexible Duct

We are engaged in manufacturing Twiga Flexible Duct, that is used in various industries for different insulation applications. Fabricated using high quality raw material. Compliant with the international industrial norms, these are also available in customized specifications to the clients.

These are widely appreciated for their:-

High thermal resistance
Excellent chemical resistance
Fine heat resistance
Dimensional Stability.

Cold Insulation - Rubber Pipe Section Selves

Leveraging on our industrial expertise, we offer a huge collection of hot and cold insulation products. These products are used in various segments for different insulation applications. Its prominent features include good thermal resistance, excellent chemical resistance, fine heat resistance and dimensional stability. All the hot and cold insulation products can be customized according to clients specifications.

Rubber Pipe Section Selves
No flame spread when fire tested k-flex st does not generate flaming droplets, has no flame spread and has a low fire propagation index. These combined, meet the fire performance requirement of class "o" as defined in building regulations by bs standards. Offers increased safety and protection. high water vapour diffusion resistance k-flex st closed cell elastomeric insulation has a high diffusion resistance factor . I that minimizes water vapour penetration, giving excellent long term performance! very low thermal conductivity k-flex st thermal conductivity is. At 0c = 0, 036 w/(m. K) giving energy savings.
advantages of k-flex nitrile rubber insulation features
closed cell insulation material
higher density
lower thermal conductivity
high water vapour diffusion resistance (m)
fire rating class "o"
flexible
wide range of operating temperature
in-built vapour barrier benefits
uniform bonding & constant insulation value
higher stability
higher resistance to heat transfer
long term insulation efficiency with lower thickness
self extinguishing Non-dripping
ease of installation & reduced cost
one product for various applications
increased resistance to water ingress.

Roofing Insulation - Building Rolls

Roofing Insulations like Glass Wool & Rock Wool insulations

Building Rolls
Application:
Building rolls are designed mainly for the thermal insulation of roofs and walls. These high temperature resistant rolls are suitable for use in pre engineered buildings, pre fabricated houses, poultry farms, HVAC ducting etc. It is also used for roofing insulation or thermal & acoustic insulation over false ceilings.
Service Temperature: It can withstand temperatures upto 750 C.
Fire-Safety: Non-combustible when tested to BS 476.
Facing: Faced with reinforced aluminium foil.Other facings available on request.
Thermal conductivity: Product shows remarkably low thermal conductivity values when tested in accordance with BS 874 : 1986. R value for thermal resistance is 1.56m.k/w, at 10C for 50mm thickness.
Moisture: Does not absorb any moisture from the air. Moisture has no effect on the stability of the building roll.

Under Duct Insulation - Thermofrost Ceiling Tile

Generally, you will not need insulation for heating and air-conditioning ducts that are enclosed in already well-insulated portions of your house. But, if the ducts for either your heating or your air-conditioning system run above the ceiling or below the floors, they should be insulated. Our range of under duct insulation is a multi purpose designed tile, most ideally suited for False Ceiling and stick on ceiling tile for instant application.


Thermofrost Ceiling Tile

Thermofrost ceiling tile is a multi purpose designed tile most ideally suited for false ceiling and stick on ceiling tile for instant application. A versatile insulation tile, most suitable for homes, showrooms, office complex, banks and hotels, available in snow white colour. Type of applications in false ceiling are:
Aluminum tee section framework
Wooden framework concealed type
Can be stuck directly to the underside of the roof
Can be easily painted by brush or spray only with water based paints or emulsion as an advantage
"Thermofrost" Ceiling Tile is a light weight, rigid Expanded Polystyrene containing 98% by volume still air entrapped in its millions of minute closed cells.
This explains its outstanding insulation properties and remarkable resistance to moisture, vapour penetration, making it the ideal low temperature insulation material with the best combination of its desirable properties.
High insulating efficiency - Non hygroscopic. High moisture resistance
Lowest permeability among insulation materials
Dimensionally stable
Does not warp or bend
Odourless and possesses no food value
Free from contamination
Does not attract organic spores and fungi.
Reduces the cost of ceiling insulation by 15%
Just 16 mm thickness of Thermofrost Tiles has the insulating property of 16" of conventional roof thickness.
Reduces heat gains by 14% and keeps even non-air conditioned rooms cool.
Reduces power consumption 12% to 15%
Highly decorative and functional.
Reduce the load on air conditioners and thereby reduces maintenance costs.

Under Duct Insulation - Chemically Cross Linked Polyethylene (SIL-XL-C)

Generally, you will not need insulation for heating and air-conditioning ducts that are enclosed in already well-insulated portions of your house. But, if the ducts for either your heating or your air-conditioning system run above the ceiling or below the floors, they should be insulated. Our range of under duct insulation is a multi purpose designed tile, most ideally suited for False Ceiling and stick on ceiling tile for instant application.

Insulation Handling Equipments - Test Port

Offering you a complete choice of products which include Thermal Insulation & Acoustic Insulation Handling Equipments such as Self-Adhesive Hangers and Test Port.


Test Port


Test port is designed for mounting on ducts/AHU, to measure temperature and air velocity. Due to its unique design air leakage from the test port is totally eliminated. It's used for thermal insulation material & acoustic insulation material holding purpose.

The body is made out of heavy duty zinc alloy casting and the cover cap is made zinc plated heavy gauge material. The inner expansion plug is made in neoprene rubber that can withstand + 80C temperature and pressure up to 85 psi when installed on the ducts.

Pre Engineered Structure - Spectrum Roofing

Owing to our vast domain expertise, we manufacture a range of insulated pre engineered structure. These structure are widely used in various industrial, commercial, institutional and other establishments. Fabricated using best quality raw material, these structures can easily withstand severe climatic conditions. Easy and fast to erect, our structures are known for their features like durability and sturdy construction.

Spectrum Roofing

Spectrum has to Its credit execution of projects more than 18, 00, 000 sq. ft. spread over variety of applications, viz. Industrial Buildings, Warehouses, Hospitals, Resorts, Club Houses, Office Buildings, Malls, Community halls etc.

We specialize in pre-engineered metal building where we offer a variety of pre-engineered metal buildings to serve almost any project need. From light duty residential storage, commercial purpose, institutional, to medium and heavy-duty Industrial purposes we have the building you need. We offer a range of multipurpose basic buildings that provide an unbeatable combination of quality, economy, and fast project completion.

Designing of Structure

Supply of Steel structure
Pre engineered buildings
Roof and wall cladding pre-coate
Sheets
Metal deck
Ventilators
Skylight
Insulation
Screws

Supplier of Anutone Boards. Our product range also comprises of Thermal Insulation, Acoustic Insulation and Hot Insulation.

Silicone sealant - GF: Gap Filler

Leading Supplier from Mumbai, our product range includes Silicone sealant such as GP: General Purpose, GP: General Purpose Plus, AP: All Purpose, IS: Industrial Seal, MB: Multi Bond, GF: Gap Filler and many more items


GF: Gap Filler

Paintable acrylic sealant description: gap filler is a high-quality, plasto-elastic one-component joint sealant based on acrylic dispersions. Applications: gap filler is recommended for filling gaps between doors and window frames during installation process. It exhibits very good bonding with skirting boards, cornices, ceramic, tiles, concrete, brick, timber and aluminium.

Silicone sealant - Gasketseal

Leading Supplier from Mumbai, our product range includes Silicone sealant such as GP: General Purpose, GP: General Purpose Plus, AP: All Purpose, IS: Industrial Seal, MB: Multi Bond, GF: Gap Filler and many more items


Gasketseal

Form in place gasketseal silicone sealant description: gasketseal is a high quality single component silicone sealant which forms a flexible rubber seal after curing and withstands very high temperatures. Applications: creation of heat resistant gaskets sealing between metal parts gaskets in pumps and motors sealings in heating systems sealings in kitchen machinery.