Product / Services
Post Buy Requirement
Keshav New Tech. Machines (India) Pvt. Ltd.
Keshav New Tech. Machines (India) Pvt. Ltd.
Bahadurgarh, Haryana, India
gstGST : 06AACCK4553D1ZU Verified Add Review
Call 08069247354 Ext. 227

Our Products

  1. Roll Forming & Bending Machines 5 Products available
  2. Crusher, Shredder & Presses 7 Products available
  3. Others 9 Products available

Crusher, Shredder & Presses #4602057

NC Press Brake Machine

NC Press Brake Machine

Look no further than Keshav New Tech Machines (India) Pvt. Ltd when you have to purchase NC press brake machines in Bahadurgarh. Manufactured at state-of-the-art manufacturing units, the machines are known for their robust welded structure and toughness.

Highest-Performing NC Press Brake Machine

The machines can withstand constant stress even under full load at the slightest deflection. The highly-precise machines we offer can be delivered to your doorstep quickly and are made with proper guidance from manufacturing experts. To know more about the NC press brake machine, call us now.

Specifications

Model Norminal Length of Table Distance Throat Depth Stroke/ Strokes Open Height Main Motor Weight Overall Dimensions
Pressure (mm) between Housings (mm) (mm) / (mm-1) (mm) (kW) (kgs) Approx. (LxWxH)
(kN)   (mm)           (mm)
KNT-NCPB 400 2000 1650 200 100/>11 340 4 2800 2300x1070x2135
-0.02
KNT-NCPB 400 2500 2050 200 100/>11 300 4 3500 2800x1070x2135
-0.016
KNT-NCPB 630 2000 1650 250 100/>10 320 5.5 3900 2300x1350x2305
-0.0315
KNT-NCPB 630 2500 2050 250 100/>10 335 5.5 5000 2750x1350x2305
-0.0252
KNT-NCPB 630 3200 2670 250 100/>10 335 5.5 5500 3450x1350x2405
-0.01969
KNT-NCPB 630 4000 3200 250 100/>10 335 5.5 6500 4300x1350x2405
-0.01575
KNT-NCPB 800 2500 2050 250 100/>10 350 7.5 6000 2780x1400x2405
-0.032
KNT-NCPB 800 3200 2660 250 100/>10 350 7.5 6200 3450x1400x2450
-0.025
KNT-NCPB 1000 2500 2050 320 100/>8 365 7.5 6400 2800x1350x2485
-0.04
KNT-NCPB 1000 3200 2650 320 100/>8 365 7.5 7300 3450x1350x2485
-0.03125
KNT-NCPB 1000 4000 3100 320 100/>8 365 7.5 11600 4300x1350x2485
-0.025
KNT-NCPB 1000 5000 4000 320 100/>8 365 7.5 12900 5300x1450x2800
-0.02
KNT-NCPB 1000 6000 4800 320 100/>8 365 7.5 16600 6300x1800x3000
-0.01667
KNT-NCPB 1250 3200 2650 320 150/>8 415 7.5 8500 3450x1550x2485
-0.03906
KNT-NCPB 1250 3600 2650 320 150/>8 415 7.5 5300 3900x1550x2485
-0.03472
KNT-NCPB 1600 3200 2640 320 200/>6 480 11 10800 3450x1600x2500
-0.05
KNT-NCPB 1600 3600 2640 320 200/>6 480 11 11800 3900x1600x2500
-0.04444
KNT-NCPB 1600 4000 3100 320 200/>6 480 11 12800 4280x1600x2500
-0.04
KNT-NCPB 1600 5000 4000 320 200/>6 480 11 16700 5300x1900x3000
-0.032
KNT-NCPB 1600 6000 4800 320 200/>6 480 11 20400 6300x2000x3300
-0.02667
KNT-NCPB 2000 3200 2650 320 200/>3 510 11 16000 3450x1950x2685
-0.0625
KNT-NCPB 2000 4000 3200 320 200/>3 510 11 18500 4300x1950x2685
-0.05
KNT-NCPB 2000 5000 4000 320 200/>3 510 11 21000 5300x1930x3000
-0.04
KNT-NCPB 2500 3200 2620 400 250/>3 560 11 21000 5300x1930x3000
-0.07813
KNT-NCPB 2500 4000 3100 400 250/>3 560 15 17000 3450x2030x3000
-0.0625
KNT-NCPB 2500 5000 4000 400 250/>3 560 15 26600 5300x2100x3300
-0.05
KNT-NCPB 3000 4000 3100 400 250/>3 560 22 25000 4300x2030x3300
-0.075
View Complete Details
Ask Latest Price & Details
H Type Pneumatic Power Press

H Type Pneumatic Power Press

FEATURES & ACCESSORIES FOR BASIC MODEL

  • Rolling Key Material 20NM GR5 Tested.
  • Wheel Bush Material 20NM GR5 Tested.
  • Shafts Material EN18 Tested.
  • ABB Make Main Motor of low Electricity consumption with installed IEC Technology.
  • Motor Pulley 01 Nos. & “V” Section Belts 02 Nos.
  • Gear & Flywheel Guard.
  • Pneumatic Clutch & Brake with Non Inclinable Body.
  • Flywheel mounting running on Bearing.
  • Pinion Shaft mounting running on Bearing.
  • Electrical Panel Console with Foot Switch.
  • Pneumatic System of Janatics/Feisto.
  • Automatic Centralized Lubrication Pump.

Specifications

MODEL NO. KNT-10/MPP/H KNT-20/MPP/H KNT-30/MPP/H KNT-50/MPP/H KNT-75/MPP/H KNT-100/MPP/H KNT-150/MPP/H KNT-200/MPP/H
Tonnage Capacity 10 20 30 50 75 100 150 200
STROKE ADJUSTABLE 8-75 MM 8-75 MM 8-75 MM 10-85 MM 10-85 MM 10-100 MM 10-150 MM 20-150 MM
PUNCH STREAM 31 MM 31 MM 32 MM 38 MM 38 MM 45 MM 50 MM 55 MM
WIDTH OF BED 367 MM 380 MM 400 MM 510 MM 580 MM 660 MM 740 MM 865 MM
LENGTH OF BED 431 MM 431 MM 457 MM 510 MM 580 MM 660 MM 740 MM 865 MM
WORKING HEIGHT 800 MM 800 MM 800 MM 800 MM 800 MM 800 MM 800 MM 800 MM
STROKE PER MINUTE 58-60 NOS. 58-60 NOS. 55-58 NOS. 52-55 NOS. 52-55 NOS. 48-50 NOS. 40-45 NOS. 35-40 NOS.
MOTOR 3 3 3 5 7.5 10 15 20
(HP x 1440 RPM)
View Complete Details
Ask Latest Price & Details
C Type Mechanical Power Press

C Type Mechanical Power Press

features & accessories for basic model

  • rolling key material 20nm gr5 tested.
  • wheel bush material 20nm gr5 tested.
  • shafts material en18 tested.
  • spare 01 nos. rolling key.
  • abb make main motor of low electricity consumption with installed iec technology.
  • motor pulley 01 nos. & v section belts 02 nos.
  • gear & flywheel guard.
  • mechanical clutch & brake with non inclinable body.
  • flywheel mounting running on bearing.
  • pinion shaft mounting running on bearing.
View Complete Details
Ask Latest Price & Details
H Type Mechanical Power Press

H Type Mechanical Power Press

When it comes to manufacturing H type hydraulic power press, nobody does it better than us at Keshav New Tech Machines (India) Pvt. Ltd. Based in Bahadurgarh, we offer high-speed hydraulic power press for a broad base of industries. The machine can be manually operated and is useful in compressing materials into the optimum permissible limit.

Cheaper and Efficient H Type Hydraulic Power Press

You can choose from our vast range of H type hydraulic power press machines all of which are precisely designed at our modern manufacturing facility unit. The manufacturing process of our hydraulic power press machines is done as per the industry laid guidelines. Call us to have a look at our product and to place your order.

View Complete Details
Ask Latest Price & Details
H Type Hydraulic Power Press

H Type Hydraulic Power Press

FRAME CONSTRUCTION

Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam deeply reinforced and fines machines after stress relieving. The interlocked design put the direct support to the frame. These frames are strain-free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.

 

TABLE & SLIDE (RAM)

Table and Slide are made of high grade heavy duty cast iron / steel fabricated and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

 

CYLINDER

The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

 

HYDRAULIC SYSTEM

The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

 

ELECTRICAL CONTROL PANEL

The electric control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the international practices to help easily locate any fault and replace components conveniently.

Specifications

Model No. KNT-10/HPH KNT-20/HPH KNT-30/HPH KNT-50/HPH KNT-80/HPH KNT-100/HPH KNT-150/HPH KNT-200/HPH KNT-250/HPH KNT-300/HPH
Capacity 10 20 30 50 80 100 150 200 250 300
Tonnage
Size of table 350×300 400×300 450x300 750x500 750×500 1000×750 1250x900 1500x1000 1500x1000 1500x1000
mm
Size of Slide 300x250 350x250 400x250 650x400 650x400 900x650 1150x800 1400x900 1400x900 1400x900
mm
Stroke 150 200 200 300 300 400 400 500 500 500
mm
Daylight 200 300 300 400 400 500 500 600 600 600
mm
Shut Height 50 100 100 100 100 100 100 100 100 100
mm
Motor 3 3 5 7.5 10 10 15 20 25 30
HP
Advance Speed 60 45 50 45 40 30 30 30 30 30
mm/sec.
Working Speed 10 10 10 10 8 7 7 7 7 7
mm/sec.
Return speed 95 80 70 70 70 70 70 70 70 70
mm/sec.
Stroke 100 120 120 120 150 150 150 200 200 200
mm

Equipments

STANDARD EQUIPMENT OPTIONAL EQUIPMENT
Variable Stroke Adjustment with Limit Switch PLC System with HMI
Front Operator Control Box Quick Die Change System
Movable Foot Switch Die Loader
Stroke Counter Pressure Strip
Operation & Maintenance Manual Die Cushion
Hydraulic Oil Air Cooling System Photo Safety Curtain
View Complete Details
Ask Latest Price & Details
C Type Hydraulic Power Press

C Type Hydraulic Power Press

FRAME CONSTRUCTION

Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam deeply reinforced and fines machines after stress relieving. The interlocked design put the direct support to the frame. These frames are strain-free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.

 

TABLE & SLIDE (RAM)

Table and Slide are made of high grade heavy duty cast iron / steel fabricated and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

 

CYLINDER

The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

 

HYDRAULIC SYSTEM

The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

 

ELECTRICAL CONTROL PANEL

The electric control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the international practices to help easily locate any fault and replace components conveniently.

Specifications

Model No. KNT-10/HPC KNT-20/HPC KNT-30/HPC KNT-50/HPC KNT-80/HPC KNT-100/HPC KNT-150/HPC KNT-200/HPC KNT-250/HPC KNT-300/HPC
Capacity 10 20 30 50 80 100 150 200 250 300
Tonnage
Size of table 500×400 600×450 700×500 800×600 900×600 1000×750 1200×800 1300×900 1500×1000 1500×1000
mm
Size of Slide 400×350 500×400 600×450 700×650 800×700 900×700 1100×725 1200×800 1400×900 1400×900
mm
Stroke 250 300 350 350 400 400 500 600 700 700
mm
Daylight 350 400 500 500 600 600 750 850 1000 1000
mm
Shut Height 100 100 150 150 200 200 250 250 300 300
mm
Motor 2 3 5 7.5 10 10 15 20 25 30
HP
Advance Speed 60 45 50 45 40 30 30 30 30 30
mm/sec.
Working Speed 10 10 10 10 8 7 7 7 7 7
mm/sec.
Return speed 95 80 70 70 70 70 70 70 70 70
mm/sec.
Stroke 100 120 120 120 150 150 150 200 200 200
mm

Equipments

STANDARD EQUIPMENT OPTIONAL EQUIPMENT
Variable Stroke Adjustment with Limit Switch PLC System with HMI
Front Operator Control Box Quick Die Change System
Movable Foot Switch Die Loader
Stroke Counter Pressure Strip
Operation & Maintenance Manual Die Cushion
Hydraulic Oil Air Cooling System Photo Safety Curtain
View Complete Details
Ask Latest Price & Details
C Type Pneumatic Power Press

C Type Pneumatic Power Press

FEATURES & ACCESSORIES FOR BASIC MODEL

  • Rolling Key Material 20NM GR5 Tested.
  • Wheel Bush Material 20NM GR5 Tested.
  • Shafts Material EN18 Tested.
  • ABB Make Main Motor of low Electricity consumption with installed IEC Technology.
  • Motor Pulley 01 Nos. & “V” Section Belts 02 Nos.
  • Gear & Flywheel Guard.
  • Pneumatic Clutch & Brake with Non Inclinable Body.
  • Flywheel mounting running on Bearing.
  • Pinion Shaft mounting running on Bearing.
  • Electrical Panel Console with Foot Switch.
  • Pneumatic System of Janatics/Feisto.
  • Automatic Centralized Lubrication Pump.

Specifications

MODEL NO. KNT-10/MPP/C KNT-20/MPP/C KNT-30/MPP/C KNT-50/MPP/C KNT-75/MPP/C KNT-100/MPP/C KNT-125/MPP/C KNT-150/MPP/C
Tonnage Capacity 10 20 30 50 75 100 125 150
Stroke ADJUSTABLE 8-50 MM 8-63 MM 8-80 MM 8-90 MM 8-90 MM 8-100 8-120 10-145
DEPTH OF THROAT 180 MM 210 MM 280 MM 280 MM 315 MM 315 MM 355 MM 400 MM
CLEAR DISTANCE B/W UPRIGHT 330 MM 330 MM 365 MM 370 MM 465 MM 465 MM 500 MM 525 MM
SLIDE ADJUSTMENT 50 MM 50 MM 63 MM 63 MM 63 MM 80 MM 80 MM 100 MM
BED AREA 355 X 560 MM 400 X 630 MM 450 X 710 MM 500 X 800 MM 500 X 900 MM 630 X 900 MM 630 X 1000 MM 630 X 1000 MM
WORKING HEIGHT 800 MM 800 MM 800 MM 800 MM 800 MM 800 MM 800 MM 800 MM
STROKE PER MINUTE 55-60 NOS. 55-60 NOS. 50-55 NOS. 48-50 NOS. 45-50 NOS. 45-50 NOS. 40-45 NOS. 40-45 NOS.
MOTOR 3 3 3 5 7.5 7.5 10 15
(HP X 1440 RPM)
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us