Our Products
In the process of fertigation/ chemigation, fertilizer is applied directly with the irrigation water. Therefore, wherever the water goes, the fertilizer goes with it. Fertilizer is applied only where needed, and in the proper quantities. The obvious advantages of fertigation, therefore, are the saving of labor and machinery, and the efficient use of the costly chemicals and fertilizers to be applied. In fertigation/chemigation, the extra activities involved in the separate application of fertilizer are no longer necessary; neither is the purchase of maintenance of dedicated equipment for fertilizer distribution. Additionally, such machinery often compresses the soil and may cause crop damage. In conclusion, one might say that fertigation is the most effective and least expensive way of providing nutrients to growing field crops.
|
Kisan (aka Trimurti/ KSR) Elastromeric Pipes are the latest in technological innovations from Kisan. Solvent Cement is the most commonly used material for jointing PVC pipes. But Solvent Cement poses innumerable problems.
Improper mix of solvent cement, too little results in weak and leaky joints and too much will lead to accumulation of cement inside the pipe, weakening the area around the joint.
Hence rigid PVC pipes fitted with an elastomeric sealing ring offers a seal so tight that the possibility of any kind of leakage becomes remote.
It also eliminates the need for cumbersome and messy adhesives and sealants.
Kisan Irrigation introduces uPVC FirmSeal (Elastomeric) Pipes especially in the higher diameter pipes. Firm seal PVC pipes have unique properties that pipes of no other material can offer, neither galvanized steel, mild steel nor asbestos cement pipes.
ELASTOMERIC SEALING RING : | ||
These rings are in accordance with IS 5382. The sealing ring has been designed in such a way that the pipes can be installed with extreme ease & convenience. The rubber ring absorbs linear expansion, leaving the seal intact, even in extreme temperature variations. | ||
Applications
1. | Tube well | |
2. | Gobar gas Line | |
3. | Rainwater drainage | |
4. | Drinking water supply lines for potable water services | |
5. | Sewerage and waste lines | |
6. | Main line for sprinklers/drip pipeline | |
7. | Underground or open pipeline | |
8. | Telecommunication and cable ducting | |
9. | Installation for brewery pipelines | |
10. | Horticultural and green house technology | |
11. | Installation in chemical plants | |
12. | Surface water drainage | |
13. | Factory supply lines, etc |
Salient Features Of FirmSeal Rings:
1. |
|
The ring is not affected by ozone, ultra – violet radiation, bacteria, fungus or termites. It is also resistant to salt water, organic vegetable oils, dilute acids, dilute alkalies, aqueous chlorine and other pollutants and contaminants found in communal sewage and waste water. |
|
2. |
|
Kisan (aka Trimurti/KSR) UPVC FrimSeal joints can withstand pressures beyond the specified testing pressure for the pipes. | |
3. |
|
The elastomeric ring can accommodate linear expansion and contraction. |
Installation Procedure:
1. |
|
|||
2. | Slightly wet FirmSeal and squeeze it into heart shape, position it inside the pipe socket for it to snap.(the socket is a 15' chamfer provided in the pipe) | |||
3. | Clean the pipe ends and coat it with lubricant before pushing into the socket Mark insertion depth if not already provided. | |||
4. | Push together only up to the insertion mark to take care of expansion.For large diameter pipe, a pipe jack may be used. | |||
5. | If shorter lengths are required cut off the pipe ends squarely using a fine toothed saw and miter box. | |||
6. | Before inserting the cutoff pipe in the socket, its end must be deburred and chamfered approx 15 degree. |
Solvent Cement is used to join two or more pipes or join a pipe to a fitting or a fitting to a fitting.Solvent Cement is available in plastic bottles of 25ml, 50ml, 100ml, 250ml, 1Ltr, and 30Ltr cans. It is also available in aluminum tubes of 25ml, 50ml, and 100ml. | |||||||||||||||||||||||||||
Precautions for handling Solvent Cement: | |||||||||||||||||||||||||||
|
have excellent resistance to inside and outside pressure because they are designed with hard chloride-vinyl resin between inside and outside and also have a good flexibility.
Applications
Welding |
In a short span of time Kisan Irrigation has produced the largest range and sizes of injection moulded PVC fittings in the country. The fittings, confirming to/ as per IS standards, are made from the highest grade quality resin. PVC fittings ensure easy installation, quick modifications as well as complete flexibility in constructing a piping system.
Features
1. | Equal Tee: | Are used for by-passing and taking service line out of main line. Availabl sizes- 20mm to 250mm. Reducing Tee is also available. |
|
2. | Female Threaded Tee (FTT): | One or more ends of this Tee is threaded. It is used for by-passing and taking service line out of main line. Reducing Female Threaded Tee (RFTT) is also available. |
|
3. | Couplers: | Are used for joining two PVC pipes. Available sizes: 20mm to 250mm. | |
4. | End Cap Plain/ Threaded: | Are used to close the end of any pipe line. Available sizes: 20mm to 250mm. | |
5. | Female Threaded Adapter (FTA): | Are used to connect a PVC pipeline directly to a metal pipe. Reducing FTA (RFTA) is also available which connects a PVC pipeline directly to a metal pipe of the lower diameter and vice-versa. |
|
6. | Male Threaded Adaptor (MTA): | Are used to connect the G.I. Pipe line/ Metal line and all types of valves, pumps etc. through a male portion of PVC Threaded adaptor. |
|
7. | Reducer: | Are used to convert the service line into a small line. Reducers can be single, double or multi stage depending upon the size of the service line and size of the small line. |
|
8. | Service Saddle: | Are used for tapping the large service main line into small feeder line for household purposes. Outlets of 20mm (1/2’’), 25mm (3/4’’), 32mm (1’’) either plain or threaded offered with nut bolts and gasket. Available sizes: 40mm to 250mm. |
|
9. | Tail Piece: | Are used for connecting air release valve/ non return valves, pumps, etc. |
Micro Irrigation Methods are the pressurized Irrigation Systems consisting of Drip & Sprinkler Irrigation. In Micro Irrigation water from water source is lifted by a pumping unit & conveyed directly to field by closed conduit piping net work without any conveyance losses.
With water becoming a scarce resource, Drip Irrigation is the answer to modern agricultural needs. Kisan Irrigation offers a wide range of reliable & cost effective drippers & dripper line products. Kisan Drip Irrigation Systems are uniquely engineered to deliver a measured quantity of water directly at the root zone of each plant at regular intervals. This is to ensure that the plants do not experience stress for water & nutrients.
At Kisan Irrigation, we provide a complete end to end solution that comprises of the following: |
Farm survey |
Soil & water analysis |
Design of system - customized to farmer needs |
Installation & commissioning of system |
Training to the farmer/user |
|
Components of Drip System: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Galvanised Iron Pipes have been in use for the past few decades for the distribution of portable water. The quality of these pipes had deteriorated so drastically over the past decade, that environmentalists and public health engineers had to search for a proper replacement to overcome the problems of
PPR-C means Polypropylene Random Copolymer (-CH2- CH-) n CH3
Kisan PPR C plumbing pipes is the right choice for hot and cold water distribution, proven worldwide due to its combining performance Durability, Reliability, Safety with Cost Saving. Kisan PPR-C Pipes & Fittings are manufactured from PPR-C Type 3 having low melt flow rate, high molecular weight and excellent creep resistance which gives long term performance under mechanical stress. The choice of raw material, the structural accuracy and the strict quality control gives the Kisan PPR C plumbing system a high degree of reliability.
Features
1. | Solar applications | |
2. | Compressed air systems (pneumatic) | |
3. | Transportation of aggressive fluids like acid and alkaline solutions | |
4. | Conveying liquids for food products | |
5. | Chill water circuit for refrigeration units | |
6. | Watering systems for green house and gardens | |
7. | DM water, affluent treatment and RO plants | |
8. | Kisan PPR-C pipes are also widely used in various industries |
For easy installation of SWR Pipes & Fittings always use KSR Rubber Lubricants.
|