KMAL Manufactures completes range of Personal & industrial weighing scales & are known for reliability, accuracy and value for money.

Kmal make weighbridges suitable for all environments and requirements, ranging in length from 6 to over 40 metres, both pit and surface mounted. Reasons to invest in a kmal weighbridge: Protected against impact and kinetic forces Longevity, strength and reliability In-house design, development and manufacture Complete customised solutions Available in transportable option Unmanned and remotely controlled weighbridges Comprehensive programme of maintenance contracts

Hopper Bottom Silos are generally built on fabricated steel structures with conical bottom made of steel plates and the corrugated sheets preformed are assembled with bolts and nuts on circular purlins and vertical stiffeners with water proof washers , cylindrically above the conical hopper with a slopped roof in the top. Ladders to clim b and get into the silos, handrails, manholes etc are provided. The grains will be discharged by gravity to the bucket elevator/belt conveyor for onward conveying. These silos can also be built on the top of concrete conical hopper with beams and columns built in situ. Aeration, ventilation, temperature monitoring system as required are all provided to the built hopper bottom silos. Normally these silos are recommended for storage upto 500 tones of grains like paddy having density of less than 550kg/m3. Hopper Bottom Silos are multipurpose and are suitable for grain processing plants, animal feed plants, grain milling plants, and poultry houses. Hopper Bottom Silos are manufactured in capacities from 20 Tons to 1000 Tons. Dynamic Analysis of silo structural stability is carried out considering seismic zone and wind loads of respective areas where the silos will be installed. Zincalume steels sheets are used in the manufacturing of the silos, which are able to withstand strength 350Mpa. Standard angle for bottom hopper of a silo is 45 degrees. However, the bottom hoppers of angle 50, 55, 60 degrees may also be manufactured on request

TTFM-NLC Low Capacity Belt Weigh Feeders for Chemicals, Food, Pharma, Ceremic, Mineral Industries. Capacities range from 100 Kgs to 1000 Kgs/Hour

Eliminate the need for cables and conduit connections between sensors and data collection devices to improve your inventory management system. Standard InvisiLink communicates using radio frequencies via RS-422 or RS-485 protocols. Click Here Communicates via RS-485 or RS-422 Integrated Power Supply for simpler installation 4-20mA Converter Integrated Option allows direct communication with the Kistler-Morse ORB system Enclosure is NEMA 4X, IP66 Rated Specifications Input/Output: RS-485, RS-422 Frequency: 900 Mhz Power Supply: 120 VAC +/- 10%; 60Hz Ambient temperature (Electronics): -40º to 185º F (-40º to +85º C) Transmission Distance Up to 3, 000 ft (914 m)* Housing Material: NEMA 4X, Fiberglass Extended Range Antenna: Up to 40 miles (64 km), NEMA 4X Outdoor includes lightening arrestor** Visual Indicators LED Lights (Power, Communication and Signal) *Distances may be reduced depending on environment. Maximum distance determined in indoor/urban environment with direct line of sight, no obstacles. **Consult Factory for extended range distances. Configuration Options InvisiLink wireless radios can be set up as single-point to point or as multi-point to point to accommodate multiple vessels or banks of silos. The same hardware is used and single-point can be upgraded to multi-point by simply changing a few settings. Choice of Antenna for Optimal Signals Choose from a standard or extended r

TTFM-3300 High Capacity feeders custom built to Applications ranging from 150 to 400 TPH. Ship Loading, Unloading, Mines, Collieries, etc.

For procedural reasons, the elevation of products is imperative in nearly all silo facilities and processing plants. Thanks to their low energy consumption, elevators supplied by KMAL are extremely economical in operation and are ideally suited for the vertical transport of bulk goods. The Standard Line, with its comprehensive package of optional equipment, is capable of handling the majority of applications in silo and storage facilities. A split hood, inspection and cleaning ports on the boot and casings, and cleanout slides ensure easy cleaning and maintenance

Combined horizontal and vertical conveying is the key function offered by this chain conveyor. Specially shaped chain flights across the entire cross-section of the trough allow for form-fit transport. In particular, the conveyance of sticky materials or transport between critical process steps during which the process itself cannot be interrupted (e.g. oil mills) are typical applications for the Incline Line. This chain conveyor is suitable for throughputs up to 480 t/h  

KMAL provides on-demand flow of even the toughest materials by eliminating bridging, rat-holes and build-up. Each powerful pulse of the nozzle directs a high-pressure / high-volume, 360-degree burst of compressed air between the material and vessel wall to lift and sweep stagnated material back into the flow stream. The nozzle design ensures an immediate, dust-tight, reseal after each pulse, preventing clogging or material feedback. Available in multiple sizes, featuring design, mounting and material construction options to suit virtually any vessel, process and material, including a Sanitary-Style to meet easy installation and removal requirements for cleaning.  

TTFM-NLC Low Capacity Belt Weigh Feeders for Chemicals, Food, Pharma, Ceremic, Mineral Industries. Capacities range from 100 Kgs to 1000 Kgs/Hour

  KMAL Manufactures completes range of Personal & industrial weighing scales & are known for reliability, accuracy and value for money.

The Microcell is an easy to install bolt on strain gauge sensor that produces an electrical output proportional to the changes in weight of a vessel. Click Here An empty vessel is not required for installation or calibration. This allows for increased up-time. No special tools are required for installation Immune to material characteristics like angle of repose, rat-holing, bridging, moisture content, compaction, vapors and dust For vessels with a capacity of 75, 000 lbs or more Repairs and retrofitting can occur without taking the silo out of commission. Specifications Average Accuracy: 3 to 5% Excitation Voltage: 10 to 30 VDC Excitation Current: Approximately 3 mA Functional Integrity (Fatigue Life): >20 million cycles Operating Temperature: -30° to 150° F (-34° to 66° C) Dimensions: 2 inch model: 2 x 1 inch; 3 inch model: 3 x 1 inch Approvals: ATEX, CE, UL