AL59 Alloy Conductors are manufactured from Al-Mg-Si (aluminum-magnesium-silica) rods. The AL59 Alloy Conductor comprises an inner core and concentrically arranged strands forming the inner and outer layers of the conductor. AL59 Alloy Conductors are limited by a maximum current carrying capacity of 838 amperes. The material of construction of AL59 Alloy Conductor allows it to transfer up to 1307 amperes of current and evacuate up to 1405 mw of power (56 per cent higher than ACSR Conductors). Additionally, AL59 Alloy Conductors have 9 per cent better 'strength to weight ratio' and 8 per cent lower sag when compared with ACSR Conductors; this enables effective optimization of tower designs and future proofing of the grid. In view of development of new power transmission and distribution grids by global power incumbents, AL59 Alloy Conductors would have a special significance while designing transmission line networks, as the properties of these conductors enable superior power evacuation while optimizing the cost of the entire grid.

Whether it is high breakdown voltage or exceptional resistance to heat and other corrosive liquids; this Aluminium Wire Rod scores high in every aspect of functioning. We are a respected name to get world-class Aluminium Wire Rods at the market leading rates. As these Aluminium Wire Rods are used in demanding applications, they possess high resistance to wear and tear.

Details :

• Specification : EC 1350, 1370 /alloy/de-oxidized /t4 wire rod with diameter 12.5mm/ 9.5mm/ 7.6mm/ 6.5mm
• Sizes Available : All sizes for 1350/1370/6201/6101/ flip coil, de-oxidized and 99.9% purity

Aluminium Conductor Steel Reinforced consists of a solid or stranded steel core surrounded by strands of aluminum (E.C. GRADE). Aluminium Conductor Steel Reinforced is available in a wide range of steel, containing carbon from 0.5% to 0.85 %. The higher strength Aluminium Conductor Steel Reinforced is used for river crossings, overhead ground wires, installations involving extra long spans etc. Against any given resistance of conductor, Aluminium Conductor Steel Reinforced may be manufactured for having a wide range of tensile strength as per requirements. The principal advantage of these Aluminium Conductor Steel Reinforced is high tensile strength so that they are used for longer spans with less supports. Due to the greater diameter of Aluminium Conductor Steel Reinforced, a much higher corona limit can be obtained causing big advantages on high as well as extra high voltage Overhead lines.

Complying With : ASTM B232: 1981 C 49-1965 AS 1220 - PART I NFC 34125 DIN 48204 IEC 209 IS 398 Part 2 & 5 BS 215 Part 2

AL59 Alloy Conductors are manufactured from Al-Mg-Si (aluminum-magnesium-silica) rods. The AL59 Alloy Conductor comprises an inner core and concentrically arranged strands forming the inner and outer layers of the conductor. AL59 Alloy Conductors are limited by a maximum current carrying capacity of 838 amperes. The material of construction of AL59 Alloy Conductor allows it to transfer up to 1307 amperes of current and evacuate up to 1405 mw of power (56 per cent higher than ACSR Conductors). Additionally, AL59 Alloy Conductors have 9 per cent better 'strength to weight ratio' and 8 per cent lower sag when compared with ACSR Conductors; this enables effective optimization of tower designs and future proofing of the grid. In view of development of new power transmission and distribution grids by global power incumbents, AL59 Alloy Conductors would have a special significance while designing transmission line networks, as the properties of these conductors enable superior power evacuation while optimizing the cost of the entire grid.

Whether it is high breakdown voltage or exceptional resistance to heat and other corrosive liquids; this Aluminium Wire Rod scores high in every aspect of functioning. We are a respected name to get world-class Aluminium Wire Rods at the market leading rates. As these Aluminium Wire Rods are used in demanding applications, they possess high resistance to wear and tear.

Details :

• Specification : EC 1350, 1370 /alloy/de-oxidized /t4 wire rod with diameter 12.5mm/ 9.5mm/ 7.6mm/ 6.5mm
• Sizes Available : All sizes for 1350/1370/6201/6101/ flip coil, de-oxidized and 99.9% purity

Aluminium Conductor Steel Reinforced consists of a solid or stranded steel core surrounded by strands of aluminum (E.C. GRADE). Aluminium Conductor Steel Reinforced is available in a wide range of steel, containing carbon from 0.5% to 0.85 %. The higher strength Aluminium Conductor Steel Reinforced is used for river crossings, overhead ground wires, installations involving extra long spans etc. Against any given resistance of conductor, Aluminium Conductor Steel Reinforced may be manufactured for having a wide range of tensile strength as per requirements. The principal advantage of these Aluminium Conductor Steel Reinforced is high tensile strength so that they are used for longer spans with less supports. Due to the greater diameter of Aluminium Conductor Steel Reinforced, a much higher corona limit can be obtained causing big advantages on high as well as extra high voltage Overhead lines.

Complying With : ASTM B232: 1981 C 49-1965 AS 1220 - PART I NFC 34125 DIN 48204 IEC 209 IS 398 Part 2 & 5 BS 215 Part 2