Howrah, West Bengal, India
We offer the best product range of Landing Valve, Cast Steel Valves, Ci Valves, Float Valve and ibr valves.
Construction : Screwed Bonnet, rising spindle Body Materials : Cast Iron/Gun Metal/Alluminium/Stainless Steel Trims : Client Requirement End Connection : IS Manufacturing Standard : IS : 5290 TYPE A & B Pressure Class : PN : 1.6 Sizes : 80 mm to 100 mm
Construction : Bolted Bonnet, Outside Screwed Rising Spindle, Body Materials : Cast Carbon Steel, Trims : Stainless Steel.End Connection :Flanged BSASADINAPI, Pressure Class : ASA : Class-150, Class 300, Class 150300600, Other Features : Gear Operation, by-pass arrangement, Head-Stock with Extension Spindle, Motor Actuation, Flexi wedge.
Construction : Bolted Bonnet, Outside screwed rising spindle.Body Materials : Cast Iron, End Connection : Flanged ISBSDINASAAPI, Other Features : Gear, by-pass, indicator, Head Stock, Extension spindle. Actuator operated, pneumatic operated.
Construction : Bolted Cover, Angle Pattern Body Materials : Cast Iron / Cast Steel Trims : Bronze / Stainless Steel / PVC Lever, Fulcrum : Mild Steel (Galvanised) Float : Copper / Stainless Steel End Connection : Flanged IS/BS/DIN/ASA Manufacturing Standard : Maker's Standard (Similar to G & K) Pressure Class : PN : 1.0 & 1.6 Sizes : 25 mm to 300 mm Features : Pilot Operated
Description : Bronze Globe Steam Stop Valve screwed bonnet having inside screwed rising spindle to be operated by handwheel. Flanges as per BS 10 Table 'H'. The renewable body seat, valve and spindle will be made of stainless steel AISI-410. The valves have back seat provision so that the gland can be re-packed even if the valve is fully open.
Bronze Globe Steam Stop Valve screwed bonnet inside screwed rising to be operated by handwheel. the value will have screwed female ends as per BSP parallel thread. The renewable body seat, valve and spindle will be made of stainless steel AISI-410. The valves have back seat provision so that the gland can be re-packed even if the valve is fully open. Materials : The body & bonnet will be made from Bronze conforming IBR 282 (a) (IV) Grade-B. The valves are hydraulically tested to 35 kg. / cm2 (500 lbs PSIG) and are suitable for maximum working pressure of 17.5 kg. / cm2 (250 PSIG) and temperature upto 4280 F (2200 C), The IBR Test Certificate in FORM III-C issued by the Chief Inspector of Boilers, West Bengal will be furnished with the materials.
Construction : Spring Loaded Angle pattern, Bolted Bonnet Body Materials : Cast Iron/Cast Steel Trims : Bronze / Stainless Steel End Connection : Flanged IS/BS/ASA Manufacturing Standard : Maker's Standard Pressure Class : PN : 1.0 & 1.6 Blow-Off-Pressure : 0 to 150 Psi upo 200 mm sizes o to 100 Psi above 200 mm sizes Sizes : 15 mm to 300 mm