Our Products
Gas consumptions | 0.5Kg/Hrs - 1.5Kg/Hrs | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fuel | LPG/Steam |
Heating type | Double jacket |
Full stainless steel heavy duty vessel. | |
Direct steam injection. | |
Removable perforated(easy to clean) tray to drain water from cooked rice. | |
Pressure valve release. | |
Lever tilted or gear tilted. | |
Free standing / wall mounted frame. | |
With or without insulation. | |
Spring loaded / manually opened lids. | |
Bakelite handles to prevent heat conductivity. | |
Standard capacity - 10 to 150 liters. Custom made also available. |
Made of 304 Grade 18 SWG SS Sheet.Gas Consumption0.5 Kg/Hrs - 1.5 Kg/HrsMaterial thickness0.8mm - 3.15mmTopMade out of 304 Grade 16 SWG SS sheet, 18 SWG SS side paneling 04 - sides.LegsMade out of 11/2"OD 16 SWG SS pipe legs with adjustable bullet legs
Product Specification
Fuel | LPG/Steam |
Heating type | Single / Double jacket |
Full stainless steel heavy duty vessel. | |
Direct steam injection. | |
Removable perforated(easy to clean) tray to drain water from cooked rice. | |
Pressure valve release. | |
Lever tilted or gear tilted. | |
Free standing / wall mounted frame. | |
With or without insulation. | |
Spring loaded / manually opened lids. | |
Bakelite handles to prevent heat conductivity. | |
Standard capacity - 10 to 150 liters. Custom made also available. |
Gas Consumption | 0.5 Kg/Hrs - 1.5 Kg/Hrs |
Material thickness | 0.8mm - 3.15mm |
Burner head | T35 G11, G9 M10 |
Frame | 11/4"x 11/4" |
Top | Made out of 304 Grade 16 SWG SS sheet, 18 SWG SS side paneling 04 - sides. |
Pan support | Cast iron pan support |
Burners | Varies as per range |
NC Value | Varies as per range |
Pigtail | Varies as per range |
Legs | Made out of 11/2"OD 16 SWG SS pipe legs with adjustable bullet legs |
Product Specifications
TopUnit chamber made out of 16 SWG SS sheet 01 NoRemovable SS rod grilling shelf with SS handles.Electric Load3 Kw Single Phases.
Product Specifications
Product Specifications
Product Specifications
Product Specification
Each heated tube has individual heaters and controls (thermostat, on/off switch, light). |
Tube thermostats adjustable from 100 to 160 F. |
Units provided with 5-foot, 3-wire, 14-gauge power cord with NEMA 5-15 plug. |
208/240V units available. |
Material: polycarbonate, appropriate for dish washers |
Stacking height without cover: 670 mm |
Stacking height with cover: 740 mm |
Capacity without cover: up to 106 parts |
Capacity with cover: up to 122 parts |
Top | Made out of 304 grade 18SWG SS sheet, sunk in type 2 Nos SS frying basket. To suit oil chamber SS oil chambe |
Electricals | Heating Elements, Front Control panel with indicating lamps thermostaticallcy controlled heating elements SS Control with lit up mechanism for heater. |
Material: Complete SS 304 |
Capacity: 5/7/10/15 Liter castor with brake. |
Vertical lever lock with handle help to move the trolley easily and safely. |
Drainage: Tap valve or ball valve |
No. of containers provided: 2 |
Item No | Dimensions | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Item No | Dimensions | ||||
---|---|---|---|---|---|
|
|
Top : 1.0mm Thick stainless steel, No 4 Satin finish |
25mm off wall for cleaning |
40mm fascia front two sides |
35mm up stand to rear only |
Made of 304 series high quality stainless steel |
Wide selection of sizes available |
Die-formed mounting brackets |
Space saving wall-mount design |
Tops | 1.2mm Thick stainless steel, No. 4 finish |
Frames | 38mm dia. round stainless steel tube, satin polished, 1.2mm thick |
Under shelves | 1.2mm Thick stainless steel, No. 4 finish with top hat stiffening |
Thick gauge stainless steel top with splash back | |
Sound muffling application incorporated | |
Splash back prevents water splash | |
Stainless steel legs with adjustable bullet feet | |
Two under shelves to stock sufficiency | |
Stainless steel inner frame provided for work top and under shelves | |
Standard size/Custom made available | |
With/Without overflow system available | |
Single/twin shelves available as per requirement |
Full AISI Stainless Steel 304 Food Grade Quality body construction. |
SS Inner pipe frame and legs structure with Nylon adjustable bullet feet. |
splash back and fall support. |
Available in various sizes correspondence to their average weights. |
Galvanized legs with adjustable plastic bullet foot. |
Includes 1 basket drain. |
Full AISI Stainless Steel 304 Food Grade Quality body construction. |
SS Inner pipe frame and legs structure with Nylon adjustable bullet feet. |
SS 304 3 nos pot wash sink of 16 Swg thickness 50 mm subk inn Top with 6" splash back and fall support |
Available in various sizes correspondence to their average weights |
Galvanized legs with adjustable plastic bullet foot |
Includes 3 basket drains |
Double knee operated valves with connecting hose and fittings. |
Gooseneck spouts with aerator. |
Strainer with basket and wall mounting brackets. |
Heavy duty 16 gauge, #304 stainless steel construction. |
10" high backsplash and 2" drain hole or holes. |
Exposed surfaces have a blended uniformed satin finish. |
Front, bottom and back are formed from a single sheet with a rolled rim. |
Inner radius coved corners. |
Two extra large bowls separated by an extra high partition, which helps prevent splashing/contamination from one bowl to the other. |
Rear integral support bracket and 14 gauge stainless steel wall clips. |
Interior surfaces have a polished finish. |
Available in two types of technology :a.) Forced Draft Technology - Cooling Coil with fans for proper in and out air circulation.b.) Static Cooling Technology - Copper pipe based cooling. |
Drain with garden hose connector for ease of cleaning. |
2.25" Puffed in place "Zero ODP" Polyol / Isolynate insulation. |
Compressor: Copeland Kirloskar / Tecumseh. |
Digital temperature controller provided in the unit. |
The Disc rotated by means of 0.5 HP single phase electric motor. |
The peeling capacity is about 60 Kgs / Hr, subject to density and nature of peeling. |
Capacity Kgs |
|
||||
Motor HP |
|
||||
Voltage |
|
||||
Frequency Hz |
|
||||
Rating |
|
||||
Net. Wt Kg |
|
||||
Peeling time (sec.) |
|
||||
Dimensions LBH (mm) |
|
The high powered 0.3 HP 220v 50 cycles single phase special type motor is housed within the body connected with 5 amps pin wire. |
Suitable for bulk vegetable cutting. |
Different moulds can ne fitted in the machine. |
High quality electric components used. |
Single phase/three phase available. |
Available in different capacities |
SPECIFICATIONS
Motor Size | ¼ " HP with electric fittings for ordinary coconut scrapper | ||
Motor Size | ½ " HP with electric fittings for Heavy duty coconut scrapper | ||
r HP |
|
||
Voltage |
|
||
Frequency Hz |
|
||
Rating |
|
||
net.Wt Kg |
|
||
Dimensions (mm) |
|
Made of high grade steel |
Vacuum base makes it user friendly as during the use, the product remains stable on the base |
dimensions (mm) |
Mirror Polish which gives it a very modern look |
Specially designed handle for easy rotation |
|
Capacity (kg/h) | 05/02/2014 | 30/10/2014 | 50-250 | 80-300 |
Revolution of Spindle (r/min) |
3800 | 3800 | 3800 | 3800 |
Working noise (db) | ≤85 | ≤ 85 | ≤ 85 | ≤ 85 |
Grinding size (mesh) | 20-120 | 20-120 | 20-120 | 20-120 |
Power of motor (kw) | 1.5 | 2.2 | 5.5 | 7.5 |
Overall size (mm L*W*H) |
580*380*800 | 580*380*920 | 630*490*1160 | 810*500*1230 |
Net weight (kg) | 75 | 85 | 155 | 200 |
MOTOR DRIVE MEAT MINCER 32SL |
Meat Output:500Kgs/Hour |
Phase:Single phase capacitor start and run |
Voltage:220V/380V 1420R/MIN |
Input Power:1.5KW |
Size:53X27X50cm |
Weight:50kg |
Motor:ISO, CE, GS, TUV UL approval.Single phase capacitor start and run |
Gas Consumptions | 0.9 Kg per hour. |
Production | 350 to 400 dosa per hour , 325 to 350 oothappam per hour |
Machine Dimension | 50' x 50' x 62' |
Flour capacity | 7 Litres |
Motor | 1 H.P. single phase or three phase |
Provided with heat reduction technology to reduce the burner heat at the outer side of the machine. | |
Machine is controlled under PLC. | |
Machine suitable for hotels , canteens and institutions. | |
Easy handling. | |
Oil Capacity 1 litre. |
Production per.hr. |
|
||
HP Required |
|
||
Size of Machine |
|
||
Fuel |
|