Ankleshwar, Gujarat, India
Our Products
Are Manufactured from high quality material with painted finish for long life and are highly resistant to site wear and tear. Can be used on all types of building construction or for any type of use where an adjustable load bearing member is recurred. The high tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustment. The cost collar located below the gives fine adjustment for leaving or striking.
The roiled thread ensures no loss of material or strength at this critical point.
Note
Props must be braced in both direction by tubes and fixed couplers at approximately 250mm above Prop nut when extended beyond 3.6M or in near measure with same strength and load carrying capacity. Steel tubes used for inner and outer of Props are continuous welded and conforms to IS: 1998 or 1161, Grade YST 210.
Medium Duty Prop
| Code | Screw Threaded Tube L/O D/T (mm) | Outer Tube L/O D/T (mm) | Inner Tube L/O D/T (mm) | Height of USE | |
|---|---|---|---|---|---|
| M/n. | Max. | ||||
| KIC. 201 | 220/60.3/3.2 | 1500/60.3/2.0 | 1500/48.3/2.0 | 1750 | 2650 |
| KIC. 102 | 220/60.3/3.2 | 1500/60.3/3.2 | 1500/60.3/2.0 | 2000 | 3150 |
| KIC. 103 | 220/60.3/3.2 | 1500/60.3/2.0 | 2500/48.3/2.0 | 2500 | 3650 |
| KIC. 104 | 220/60.3/3.2 | 1500/60.3/2.0 | 3000/48.3/2.0 | 3000 | 4150 |
| KIC. 105 | 220/60.3/3.2 | 2000/60.3/2.0 | 3000/48.3/2.0 | 3000 | 4650 |
Heavy Duty Prop
| Code | Screw Threaded Tube L/O D/T (mm) | Outer Tube L/O D/T (mm) | Inner Tube L/O D/T (mm) | Height of USE (mm) | |
|---|---|---|---|---|---|
| M/n. | Max. | ||||
| KIC. 201 | 220/60.3/3.2 | 1500/60.3/3.1 | 1500/48.3/3.1 | 1750 | 2650 |
| KIC. 202 | 220/60.3/3.2 | 1500/60.3/3.1 | 2000/48.3/3.1 | 2000 | 3150 |
| KIC. 203 | 220/60.3/3.2 | 1500/60.3/3.1 | 2500/48.3/3.1 | 2500 | 3650 |
| KIC. 204 | 220/60.3/3.2 | 1500/60.3/3.1 | 3000/48.3/3.1 | 3000 | 4150 |
| KIC. 205 | 220/60.3/3.2 | 2000/60.3/3.1 | 3000/48.3/3.1 | 3000 | 4650 |
A high quality adjustable prop. Complete with swivel head and pre-drilled anchor base plate.
| Code | Closed | Open |
|---|---|---|
| KIC. 301 | 1.14m | 1.83m |
| KIC. 302 | 1.85m | 3.12m |
| KIC. 303 | 2.08m | 3.35m |
| KIC. 304 | 2.69m | 3.96m |
| KIC. 305 | 3.30m | 4.88m |
Propex Mini Prop & High Quality are manufactured from high quality material. IS 1161 standard with paint finished for long life and are highly resistant to site wear and tear.
Can be used on all type of ETP Plant Tank foundation, where adjustable load bearing member is recurred.
| Code | Height of USE (mm) | |
|---|---|---|
| M/n. | Max. | |
| KIC. 401 | 600 mm | 900 mm |
| KIC. 402 | 900 mm | 1200 mm |
