Other Products / Services #6823023

Filtek P60 Posterior Restorative is a light curing, radiopaque, packable composite indicated for posterior restorations. It demonstrates superior packability making it and excellent choice for posterior tooth restorative therapy. The low polymerization shrinkage offered by Filtek P60 reduces the risk of microleakage. It has a fast curing time of only 20 seconds, thereby reducing the chair time taken. The superior wear resistance of the product augments the strength of the restoration. The filler used in Filtek P60 is zirconia/silica. The particle sizes range from 0.01 to 3.5 μm. The restorative is available in shades A3 and B2 and is supplied in traditional syringes.

Details :

• Available in 3 common shades - A3 and B2
• Rapid cure (20 Seconds for 2.5mm increment)
• Low polymerisation shrinkage
• Superior packablity

Indications :

• Class I and Class II posterior tooth restorations
• Sandwich restorations
• Core build-up
• Splinting
• Indirect restorations such as inlays, onlays and veneers.

Features :

• Excellent packability
• Fast curing (20s for 2.5 mm)
• Low polymerization shrinkage
• Superior wear resistance
• Excellent strength

Price Details :

• 1 - 9 Pieces - $30.00
• 10 - 29 Pieces -  $27.00
• 30 - 99 Pieces - $25.00
• >=100 Pieces - $22.00

B-OstIN is synthetic bone graft substitute, which is prepared by wet chemical processing. The best chemical available are used in manufacturing of phase pure synthetic B-OstIN (HAP). The manufacturing process conforms to ASTM standards.
B-OstIN implant is non-immunogenic surrounded by cellular infiltrate, which is predominantly fibroblastic.

• No lysis of red blood cells (RBC)
• No Cytotoxic effects on cells in contact with B-OstIN
• No tissue necrosis
• No toxic leachants post-implantation of B-OstIN

Available in the following Packagings :

• 0.5 CC in 1 Vial Pack
• 0.5 CC x 2 Vials Pack
• 0.5 CC x 4 Vials Pack
• 1.0 CC x 1 Vial Pack
• 2 CC x 1 Vial Pack
• 5 CC x 1 Vial Pack

The ColoGide is derived from bovine Source, Its is a resorbable, non-friable barrier membrane obtained from highly purified Type- l collagen derived from specially controlled and certified animals and is highly purified to avoid any antigenicity.

GTR membrane Available in the following Packagings :

• Sizes : 10X15mm
• Sizes : 15X20mm
• Sizes : 20X32mm
• Sizes : 30X42mm

A chemically cured strontium based glass ionomer cement ideal for basic routine luting of metal based restorations.

Characteristics & Benefits

• Excellent adhesion to both tooth and metal
• Biocompatibility and a tooth-like coefficient of thermal expansion reduces the risk of post-operative sensitivity
• Good mixing properties results in a smooth creamy mix with good flow
• Film thickness of just 15 microns makes complete seating of crowns easy
• Extended working time with sharp set
• Long term fluoride release
• Many years of documented clinical success

Indications for Gold Label 1

• Final cementation of metal or porcelain fused to metal crowns & bridges
• Cementation of stainless steel crowns and orthodontic bands
• Lining under restorative materials

How to Use Gold Label 1

• Mix to the correct powder:liquid ratio (20 seconds for Gold Label 1)
• Apply the mixed cement to both restoration and prepared tooth
• Seat the restoration within 30 seconds of completing the mix
• Remove the excess cement during the gel stage
• Total setting time is 4’30” after start of mix
• After final set, moisture proof the margin by applying a final coat of GC Fuji Varnish or GC Fuji Coat LC

Features :

• 60kV/2mA Toshiba tube
• Exposure time (.01-2.0 sec)
• Graphic LCD display
• IOPA film & radio visiography sensor compatible
• Round type beam limiting device
• Total filtration 1.8 mm AlAC
• 60-70 X-ray shots on film or 90 to 100 x-ray shots on sensor once battery is recharged
• Internally lead coated to avoid over exposure & dispersion of radiation
• Rechargeable lithium-polymer battery
• Patient & tooth selection mode
• Ideal for multi chair clinics

Clinical features:

• This range is known for its high efficiency for sharp radiography and renders high quality images
• Regarding the patient’s safety to radiation exposure, we utilize non-invasive diagnostic imaging equipment
• All X-rays are able to operate with IOPA Film and RVG ensuring the ease of operation

HEMOSPONGE Dental SLIt is widely used for arresting the bleeding following tooth extraction. It may also be used in other oral surgeries and in areas where the small size of the sponge is an advantage, e.g., epistaxis.

How HEMOSPONGE works:The spongy structure of HEMOSPONGE provides surface to thrombocytes of oozing blood, enabling thrombocytes to release a series of substances and promoting self aggregation. At the same time it also makes thrombocytes to act as a catalyst for the formation of the fibrin, activating cascade of blood coagulation.

Salient Features:

• Effectively stop all kinds of oozing blood (capillary, parenchymal or arteriovenous)
• Can hold around 35 – 40 times of its own weight of blood/body fluids within its matrix
• pH neutral and can be impregnated with wide variety of pharmaceuticals/biologics
• Manufactured from highly purified gelatin (collagen derived protein)
• Non-toxic, non-allergic and biocompatible
• Liquefies within 3 – 4 days when placed in mucosal cavity
• Completely biodegradable (metabolised by proteolytic enzymes) and absorb in body within 4-6 weeks when placed in tissues
• Manufactured in HEPA filtered clean rooms with environmentally and microbiologically monitored air
• Sterilized by gamma irradiation after final packaging to destroy any microorganisms without negatively affecting the physical properties of product
• Double packed for assurance of sterility
• Supplied in the form of READY-TO-USE. No need to resterilize the product before its use
• Available in many sizes to fit common surgical procedures
• Complies US Pharmacopoeia standards

Features :

• Bond strengths between 22-36 MPa. Depending on substrates. High bond strengths without an adhesive.
• Ease of use. No need to refrigerate, easy cleanup, and no hand mixing required.
• Compatibility with common substrates. Anterior or posterior ceramics, PFMs and metal restorations, and CAD/CAM materials.
• Efficient self-cure mechanism. Sets up completely in the absence of light.
• 2 x 5gm syringe

OptiBond™ S is a single-component adhesive designed for both direct and indirect bonding applications. It is 15% filled with the same 0.4 micron filler found in the Kerr Point 4 composite. The filler not only reinforces the hybrid zone but also penetrates the dentin tubules, creating a true "structured bond" not found in unfilled or even "nano" filled adhesive systems.This unique technology provides the highest level of protection against microleakage, while sustaining high bond strengths to a variety of surfaces.

Enlight Bonding SystemHighly filled light-cure adhesive. Bis-GMA resin for superb handling characteristics, easy cleaning. Highly active initiater system supports reduced cure times.

Tooth preparation

• Place the lip/cheek retractor and saliva ejector in the mouth. prphy the teeth thoroughly with pumice and water. Rinse with water while using a high speed evacuation system. Dry the teeth with air syringe.
• Apply the etchant solution to the bonding surfaces with applicator sponges. Gently dab the etching solution : do no rub. A continuous dabbing of fresh solution for 30 secdonds is most effective. Rinse thoroughly with a forcefull air-water spray and suction using high speed evacuator. Maintain a dry field. Do no allowthe patient to rinse or permit contact of the etched enamel with saliva or mucosal tissue.
• Dry the etched enamel with clean, dry air, The etched enamel must now have a uniform, dull frostly appearance.

Bonding Procedure

• Dispense a small amount of sealant on the mixing pad. apply ortho solo sealant to teeth using the brushes provided. A thin, uniform coating should extent from the gingival crest and vover all of the etched enamel. Replance the cap immediately after dispensing sealant.
• Extrude a small amount of  enlight adhesive paste into the base of the bracket pad. After application, clean the tip and replace cap.
• Place the bracket onto the tooth surface immediately after applijng adhesive.
• Adjust the bracket to its final position and press firmly.
• Remove the excess adhesive from the periphery of the brackets base.
• With Demetron's optilux 501,   Expose the adhesive for 10 second for metal brackets, and 5 second for ceramic brackets. shining the light directly through the bracket bonds ceramic brackets. Divide the curing time and shine the light on the mesial and distal edges of the brackets to bond metal brackets.
• Active archwires may be placed immediately after curring the last bracket.

Shelf life and storage

• Do not expose materials to intense light or elevated temperatures.
• Enlight should be used at ambient temperature.

Caution :

• Etching Solution :Contains 37% phosphoric acid solution. Avoid contact with skin, eyes, and soft tissue. In case of contact with skin or eyes, flush immediately with water, get medical attention for eyes. Do not take internally.
• Sealant and paste : Avoid prolonged or repeated contact with oral tissues and skin. wash skin with soap and water after contact. uncured materials may cause contact dermatitis. if skin irritation occurs, discontinues use. Use in a well ventilated area. Keep containers closed when not in use.

Enlight Bonding SystemHighly filled light-cure adhesive. Bis-GMA resin for superb handling characteristics, easy cleaning. Highly active initiater system supports reduced cure times.

Tooth preparation

• Place the lip/cheek retractor and saliva ejector in the mouth. prphy the teeth thoroughly with pumice and water. Rinse with water while using a high speed evacuation system. Dry the teeth with air syringe.
• Apply the etchant solution to the bonding surfaces with applicator sponges. Gently dab the etching solution : do no rub. A continuous dabbing of fresh solution for 30 secdonds is most effective. Rinse thoroughly with a forcefull air-water spray and suction using high speed evacuator. Maintain a dry field. Do no allowthe patient to rinse or permit contact of the etched enamel with saliva or mucosal tissue.
• Dry the etched enamel with clean, dry air, The etched enamel must now have a uniform, dull frostly appearance.

Bonding Procedure

• Dispense a small amount of sealant on the mixing pad. apply ortho solo sealant to teeth using the brushes provided. A thin, uniform coating should extent from the gingival crest and vover all of the etched enamel. Replance the cap immediately after dispensing sealant.
• Extrude a small amount of  enlight adhesive paste into the base of the bracket pad. After application, clean the tip and replace cap.
• Place the bracket onto the tooth surface immediately after applijng adhesive.
• Adjust the bracket to its final position and press firmly.
• Remove the excess adhesive from the periphery of the brackets base.
• With Demetron's optilux 501,   Expose the adhesive for 10 second for metal brackets, and 5 second for ceramic brackets. shining the light directly through the bracket bonds ceramic brackets. Divide the curing time and shine the light on the mesial and distal edges of the brackets to bond metal brackets.
• Active archwires may be placed immediately after curring the last bracket.

Shelf life and storage

• Do not expose materials to intense light or elevated temperatures.
• Enlight should be used at ambient temperature.

Caution :

• Etching Solution :Contains 37% phosphoric acid solution. Avoid contact with skin, eyes, and soft tissue. In case of contact with skin or eyes, flush immediately with water, get medical attention for eyes. Do not take internally.
• Sealant and paste : Avoid prolonged or repeated contact with oral tissues and skin. wash skin with soap and water after contact. uncured materials may cause contact dermatitis. if skin irritation occurs, discontinues use. Use in a well ventilated area. Keep containers closed when not in use.

Enlight Bonding SystemHighly filled light-cure adhesive. Bis-GMA resin for superb handling characteristics, easy cleaning. Highly active initiater system supports reduced cure times.

Tooth preparation

• Place the lip/cheek retractor and saliva ejector in the mouth. prphy the teeth thoroughly with pumice and water. Rinse with water while using a high speed evacuation system. Dry the teeth with air syringe.
• Apply the etchant solution to the bonding surfaces with applicator sponges. Gently dab the etching solution : do no rub. A continuous dabbing of fresh solution for 30 secdonds is most effective. Rinse thoroughly with a forcefull air-water spray and suction using high speed evacuator. Maintain a dry field. Do no allowthe patient to rinse or permit contact of the etched enamel with saliva or mucosal tissue.
• Dry the etched enamel with clean, dry air, The etched enamel must now have a uniform, dull frostly appearance.

Bonding Procedure

• Dispense a small amount of sealant on the mixing pad. apply ortho solo sealant to teeth using the brushes provided. A thin, uniform coating should extent from the gingival crest and vover all of the etched enamel. Replance the cap immediately after dispensing sealant.
• Extrude a small amount of  enlight adhesive paste into the base of the bracket pad. After application, clean the tip and replace cap.
• Place the bracket onto the tooth surface immediately after applijng adhesive.
• Adjust the bracket to its final position and press firmly.
• Remove the excess adhesive from the periphery of the brackets base.
• With Demetron's optilux 501,   Expose the adhesive for 10 second for metal brackets, and 5 second for ceramic brackets. shining the light directly through the bracket bonds ceramic brackets. Divide the curing time and shine the light on the mesial and distal edges of the brackets to bond metal brackets.
• Active archwires may be placed immediately after curring the last bracket.

Shelf life and storage

• Do not expose materials to intense light or elevated temperatures.
• Enlight should be used at ambient temperature.

Caution :

• Etching Solution :Contains 37% phosphoric acid solution. Avoid contact with skin, eyes, and soft tissue. In case of contact with skin or eyes, flush immediately with water, get medical attention for eyes. Do not take internally.
• Sealant and paste : Avoid prolonged or repeated contact with oral tissues and skin. wash skin with soap and water after contact. uncured materials may cause contact dermatitis. if skin irritation occurs, discontinues use. Use in a well ventilated area. Keep containers closed when not in use.

This complete set up, comprising lab engine and control box, is made in Korea. Fabricated by using high quality components and other material that ensures its long service life.

About Micromotor Lab Engine 105L:

• Speed upto 40, 000 RPM
• One spare carbon brush set
• Low heat generation suitable for long use

About Control Box:

• 0-35, 000 RPM
• Forward & Reverse direction selection
• Hand & Foot Operation
• Extra torque for smooth working

Prevest Denpro Fusion Flo Light Cured Nano Hybride Flowable Composite Kit 4 X 2gmFusion Flo is a flowable composite that provides strength & high wear resistance and also characterized by optimum surface affinity. it can penetrate into most difficult areas.

Indications

• Lower polymerisation shrinkage
• Very good abrasion resistance
• Higher filler loading of 70% w/w
• Excellent physical properties
• Optimal flowability

Benefits

• Optimal flowability
• Higher filler loading of 70% w/w
• Excellent physical properties
• Lower polymerisation shrinkage
• Very good abrasion resistance