My ExportersIndia

For Buyer

For Seller

For Help

Medicines Tonics And Drugs

Our Complete range of products are NS 3% Injection, D10 Injection, Dns Injection, Mannitol Injection and K-Lyte-P Injection.

NS 3% Injection

  • Form Liquid
  • Packaging Type 100ml, 250ml, 500ml (PP, FFS & Glass)
  • Storage Cool & Dry Place
  • Sodium Chloride IP 0.45 gm
  • Water for injection IP Q.S.

Indication : Hyponatremia and hypochloremia due to electrohyte and fluid loss replaced with sodium free fluid.

View Complete Details

D10 Injection

  • Number Of Flower Allopathic
  • Form Liquid
  • Packaging Type Transaprent
  • Storage Cool & Dry Place
  • Dextrose Anhydrous IP 10 gm
  • Water for injection IP Q.S.
View Complete Details

DNS Injection

  • Form Liquid
  • Packaging Type 500ml, 1000ml (PP , FFS & Glass )
  • Sodium Chloride IP 0.9 gm
  • Dextrose Anhydrous IP 5 gm
  • Water for injection IP Q.S.

Indication :

  • Correction of salt depletion and hypovolemia with supply of energy
  • Early post operative period
  • As maintenance fluid therapy

Sodium chloride & Dextrose Injection IP (0.45% & 5%w/v)Sodium chloride & Dextrose Injection IP (0.33% & 5%w/v)Sodium chloride & Dextrose Injection IP (0.2% & 5%w/v)Sodium chloride & Dextrose Injection IP (0.11% & 5%w/v)Sodium chloride & Dextrose Injection IP (0.225% & 5%w/v)Sodium chloride & Dextrose Injection IP (0.45% & 2.5%w/v)Sodium chloride & Dextrose Injection IP (0.9% & 10%w/v)

View Complete Details

Mannitol Injection

  • Form Liquid
  • Packaging Type Transaparent
  • Packaging Type 100ml, 350ml (PP, FFS & Glass)
  • Storage Cool & Dry Place
  • Mannitol IP 20 gm
  • Water for injection IP Q.S.

Indication :

  • Reduction of intracranial pressure
  • Reduction of intraocular pressure
  • Prevention and treatment of oligouric phase of acute renal failure
  • To promote urinary excretion of toxic substance
View Complete Details

K-Lyte-P Injection

  • Form Liquid
  • Application Molding Injections
  • Dextrose anhydrous IP 5 gm
  • Magnesium Chloride IP 0.031 gm
  • Potassium Chloride IP 0.13 gm
  • Sodium Acetate IP 0.320 gm
  • Dibasic Potassium Phosphate USP 0.026 gm
  • Water for injection IP Q.S.

Indication :

  • Used with great care in patients with congestive heart failure.
  • Severe renal insufficiency.
  • In clinical states in which there exists edema with sodium retention.
  • Used with great care in patients with metabolic or respiratory alkalosis.
  • The administration of lactate ions should be done with great care in those conditions in which there is an increased level or an impaired utilization of these ions, such as severe hepatic insufficiency.
View Complete Details

K-Lyte-M Injection

  • Packaging Type 500ml (PP, FFS & Glass)
  • Dextrose anhydrous IP 5 gm
  • Sodium Chloride IP 0.1 gm
  • Potassium Chloride IP 0.15 gm
  • Sodium Acetate IP 0.28 gm
  • Dibasic Potassium Phosphate USP 0.13 gm
  • Water for injection IP Q.S.

Indication : Used in adults as a source of electrolytes, calories and water for hydration, and as an alkalinizing agent.

View Complete Details

K-Lyte-E Injection

  • Packaging Type 500ml, 1000ml (PP, FFS & Glass)
  • Dextrose anhydrous IP 5 gm
  • Sodium Chloride IP 0.37 gm
  • Potassium Chloride IP 0.13 gm
  • Sodium Acetate IP 0.64 gm
  • Calcium Chloride IP 0.035 gm
  • Magnesium Chloride IP 0.031 gm
  • Sodium Citrate IP 0.075 gm
  • Water for injection IP Q.S.

Indication : Iindicated as a source of water and electrolytes or as an alkalinizing agent.

View Complete Details

K-Lyte-G Injection

  • Packaging Type 500ml (PP, FFS & Glass)
  • Dextrose anhydrous IP 5 gm
  • Sodium Chloride IP 0.37 gm
  • Potassium Chloride IP 0.13 gm
  • Ammonium Chloride IP 0.37 gm
  • Water for injection IP Q.S.

Indication :

  • Indicated as a source of water and electrolytes.
  • Used in patients as a source of bicarbonate in the treatment of mild to moderate metabolic acidosis associated with dehydration or associated with potassium deficiency.
  • Also indicated as methods of intravenous drug delivery, if the drugs are compatible with the solutions.
View Complete Details

Metronidazole Injection

  • Number Of Flower Allopathic
  • Number Of Flower Transparent
  • Metronidazole IP 0.5 gm
  • Water for injection IP Q.S.
  • Form Liquid
  • Packing 100ml (PP, FFS & Glass)

Indication :

  • For symtopmatic intestinal and extraintestinal amebiasis ,
  • Infections with Trichomonas vaginalis and Giardia lamblia. Reliably effective against Gardnerella vaginosis.
View Complete Details

Rl Injection

  • Packaging Type 500ml, 1000ml (PP, FFS & Glass)
  • Storage Cool & Dry Place
  • Sodium Chloride IP 0.6 gm
  • Potassium Chloride IP 0.04 gm
  • Calcium Chloride IP 0.027 gm
  • Sodium Lactate USP 0.32 gm
  • Water for injection P Q.S.

Indication :

  • Restoration of extracellular fluid and electrolytes balances or replacement of extracellular fluid loss where isotonic concentrations of electrolytes are sufficient
  • Short term volume replacement (alone or in association with colloid) in case of hypovolemia or hypotension.
  • Regulation or maintenance of metabolic acidosis balance and/or treatment of mild to moderate metabolic acidosis (except lactic acidosis)
View Complete Details

Invert Sugar Injection

  • Number Of Flower Invert
  • Form Liquid
  • Packaging Type 500ml ( Glass)
  • PG Sugar IP 10 gm
  • Water for injection IP Q.S.

Indication :

  • Itravenous alimentation in trauma, pre/post-operative period,
  • Acute abdomen, diabetic ketoacidosis in recovery phase,
  • Azotaemia, alcoholic intoxication,
  • Dehydration following acute vomiting, gastro-enteritis, cholera
View Complete Details

Linezolid Injection

  • Form Liquid
  • Packaging Type 100ml & 300ml in FFS bottles
  • Linezolid IP 2 mg
  • Dextrose Anhydrous IP 50 mg
  • Water for injection IP Q.S.

Indication :

  • In adult for the treatment of nosocomial pneumonia.
  • Community acquired pneumonia
  • Complicated skin and soft tissue infections
View Complete Details

Paracetamol Infusion

24 - 26 / Bottle Get Latest Price
  • Paracetamol IP 1000 Mg
  • Packaging Size 100 Ml
  • Form Liquid
  • Brand Name K mol
  • Country of Origin India
  • Type Pure
  • Water for Injection Q.S.
  • Packing 100 ml in Glass & FFS bottles

Indication :

  • Paracetamol Injection (K-Mol) is an analgesic (it relieves pain) and an antipyretic (it lowers fever).
  • K-Mol is indicated for the short-term treatment of moderate pain
  • Especially following surgery, and for the short-term treatment of fever.
View Complete Details

Katocine Injection

  • Form Liquid
  • Packaging Type 100ml FFS & Glass Bottle
  • Mannitol IP 10 gm
  • Glycerine IP 10 gm
  • Water for Injection IP Q.S.

Indication :

  • Mannitol with Glycerine (Katocine) is indicated for the treatment, control, prevention, & improvement of the following diseases, conditions and symptoms
  • Kidney failure
  • Fluid retention in brain
  • Raised intraocular pressure
  • Dry or flaky skin
  • Occasional constipation
  • Increased eye pressure
  • Lubricates and moistens skin surfaces
View Complete Details

D5 Injection

  • Number Of Flower Pure
  • Form Liquid
  • Packaging Type 500ml, 1000ml (PP & FFS)
  • Dextrose Anhydrous IP 5 gm
  • Water for injection IP Q.S

Indication :

  • Basic fluid to provide adequate calories
  • Pre and Post operative fluid replacement
  • For IV administration of various drugs
  • Prevention and treatment of dehydration due to excessive water loss
  • High concentration (10% above)
  • To provide nutrition to patients on maintenance fluid therapy
  • Rapid correction of hypoglycaemia
View Complete Details

Ciprofloxacin Injection

  • Form Liquid
  • Packaging Type 100ml (PP, FFS & Glass)
  • Sodium Chloride IP 0.9 gm
  • Ciprofloxacin Lactate eq. to Ciprofloxacin 0.2 gm
  • Water for injection IP Q.S.

Indication :

  • Susceptible infections, including lower respiratory tract, Skin and skin structures, Bone and joint
  • Aacute sinusitis, complicated intra abdominal (w. metronidazole)
  • UTIs, chronic bacterial prostatitis, acute uncomplicated cystitis in females.
  • Postexposure prophylaxis and treatment of anthrax.
View Complete Details

Veterinary Injection

  • Dosage Form Liquid
  • Application To Animals
  • Packaging Type Plastic Bottle
  • Number Of Flower Allopathic
  • Purity 100%

Range :

  • Dextrose Injection IP (5% w/v) (Vet. )
  • Dextrose Injection IP (10% w/v) (Vet.)
  • Sodium Chloride & Dextrose Injection IP (0.9% & 5% w/v) (Vet. )
  • Sodium Chloride Injection IP (0.9% w/v) (Vet. )
  • Compound Sodium Lactate Injection IP (RL) (Vet. )
  • Mannitol Injection IP (20% w/v) (Vet. )
  • Metronidazole Injection IP (Vet.)
  • Multiple Electrolytes & Dextrose Injection Type III IP (Vet.)
  • Multiple Electrolytes & Dextrose Injection Type I IP ( Vet.)
  • Dextrose Injection IP (25% w/v) ( Vet.)
  • Compound Sodium Chloride Injection IP (Ringer's Injection) (Vet.)
  • Dextrose Injection IP (50% w/v) (Vet.)
  • Compound Sodium Lactate and Dextrose Injection IP (Vet.)
  • Moxifloxacin Injection (Vet.)
  • Tylosine Injection IP (Vet.)
  • Calcium Magnesium Borogluconate Injection IP (Vet.)
  • Calcium Borogluconate Injection IP (Vet.)

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us