Kutch, Gujarat, India
GST : 24ARYPM9031C1ZL
Verified
Add Review
Our Products
We have maintained our name in the list of leading manufacturer, supplier and exporter of Pilling Grade Bentonite Powder based in Mandvi, Gujarat, India. Our Piling Grade Bentonite Powder is used widely in many industries as a support, lubricant agent in walls and foundations, tunneling and horizontal drilling. Our Piling Grade Bentonite Powder covers large surface area, has good plasticity and lubricity, low filter loss, excellent gel strength, good impermeability and low compressibility.
Physical Analysis
|
Properties |
Protocol |
Unit |
Result |
|---|---|---|---|
|
Liquid Limit |
IS:12446-1988 |
ml/100 gm |
400 - 450 |
|
Moisture Content |
|
% by wt. |
12.0 Max |
|
Dry Screen Analysis |
IS:6186-1986% |
% by wt. |
10.0 max. |
|
Free Swelling Volume |
|
ml |
30 - 35 |
|
PH Value of 5% gel |
IS:6186-1986 |
pH |
9.5 - 10.0 |
|
Loose Bulk Density |
IS:7589-1974 |
gm/ml |
0.85 – 1.0 |
|
Gel Time 2.5gm/25 ml |
IS:12446-1988 |
second |
Instant |
|
Filterate Volume |
|
ml |
20 max |
|
Viscosty at 600 rpm |
|
30 min |
|
|
Methylene Blue Value |
|
mg/gm of |
350 - 400 |
We are the manufacturer, supplier and exporter of Foundry Grade Bentonite Powder from Mandvi, Gujarat, India. Our Foundry Grade Bentonite Powder is used as a bonding material in the preparation of molding sand for the production of iron, steel and non-ferrous casting. Foundries also employ sodium Bentonite to clean impurities from melted metals before pouring them. We offer this premium quality powder at low prices
Physical Analysis
|
Properties |
Protocol |
Unit |
Result |
|---|---|---|---|
|
Free Swelling Volume 2 |
ASTM D 5890:1995 |
ml |
30-38 |
|
Swelling Index |
IS:6186-1986 |
10ml/gm |
35 |
|
Methylene Blue Absorption Value |
|
mg/gm |
375 - 440 |
|
Liquid Limit |
IS:12446-1988 |
ml/100 |
600 - 700 |
|
Gel Time 2.5gm/25 ml |
IS:12446-1988 |
second |
Instant. |
|
Gelling Index |
IS:12446-1988 |
ml |
85-90 |
|
Moisture Content % by |
|
% |
10.0 - 12.0 |
|
PH Value 2% slurry |
IS:6186-1986 |
pH |
9.5 – 10.5 |
|
Green Compression
|
IS:12446-1988 |
psi |
13 |
|
Wet Tensile Strength |
IS:12446-1988 |
N/cm2 |
0.20 - 0.27 |
|
Dry Mesh % Passing 200 |
IS:6186-1986 |
% |
85 |
We are the manufacturer, supplier and exporter of IOP Grade Bentonite Powder from Mandvi, Gujarat, India. The bentonite powder offered by us has higher natural percentage of iron, which is ideal in isolating iron ore pellets with the maximum percentage of iron. Our IOP Grade Bentonite Powder is used as a binding agent in the production of iron ore pellets. It also offers more superior thermal durability. It is offered at attractive prices to our clients.
Physical Analysis
|
Properties |
Protocol |
Unit |
Required |
|---|---|---|---|
|
Moisture Content |
|
% by wt. |
10.0 – 12.0 |
|
LOI |
IS:2000(P-1)-1985 |
% by wt. |
8 – 10 |
|
Free Swelling Volume |
ASTM D 5890:1995 |
ml |
30 – 35 |
|
PH Value of 5% gel |
IS:6186-1986 |
pH |
9.0 – 10.0 |
|
Plate Water Absorption |
ASTM E 946 |
% |
700 miin |
|
Gel Time 2.5gm/25 ml |
IS:12446-1988 |
second |
Instant |
|
Methylene Blue Value |
|
mg/gm of |
400 - 450 |
|
Dry Mesh % Passing 200 |
IS:6186-1986 |
% |
90 Minimum |
We are the eminent manufacturer, supplier and exporter of Drilling Grade Bentonite Powder located in Mandvi, Gujarat, India. The Drilling Grade Bentonite Powder is used predominantly as a mud constituent for oil and water well drilling. Its plays an important role in sealing the borehole walls, to remove drill cuttings and to lubricate the cutting head. Our Drilling Grade Bentonite Powder has high swelling and good colloidal nature which are made available at reasonable prices.
Specifications Of API 13-A Sec.-9
| Parameters | Specification |
|---|---|
| Suspension Properties Viscometer dial reading @ 600 rpm | Minimum 30 |
| Yield point/plastic viscosity ratio | Maximum 3 |
| Filtrate volume | 15 cm3 Max |
| Residue of diameter greater than 75 micron | 4% Max |
| Moisture | 12% Max |
Specifications Of API 13-A Sec.-11(OCMA)
| Parameters | Specification |
|---|---|
| Suspension Properties Viscometer dial reading @ 600 rpm | 30 Min |
| Yield point/plastic viscosity ratio |
6 Max |
| Filtrate volume | 16 cm3 Max |
| Residue of diameter greater than 75 micron | 4% Max |
| Moisture | 12% Max |
We are the manufacturer, supplier and exporter of IOP Grade Bentonite Lumps from Mandvi, Gujarat, India. The bentonite powder offered by us has higher natural percentage of iron, which is ideal in isolating iron ore pellets with the maximum percentage of iron. Our IOP Grade Bentonite Powder is used as a binding agent in the production of iron ore pellets. It also offers more superior thermal durability. It is offered at attractive prices to our clients.
Physical Analysis
|
Properties |
Protocol |
Unit |
Required |
|---|---|---|---|
|
Moisture Content |
API Spec. 13A:2004/ |
% by wt. |
10.0 – 12.0 |
|
LOI |
IS:2000(P-1)-1985 |
% by wt. |
8 – 10 |
|
Free Swelling Volume |
ASTM D 5890:1995 |
ml |
30 – 35 |
|
PH Value of 5% gel |
IS:6186-1986 |
pH |
9.0 – 10.0 |
|
Plate Water Absorption |
ASTM E 946 |
% |
700 miin |
|
Gel Time 2.5gm/25 ml |
IS:12446-1988 |
second |
Instant |
|
Methylene Blue Value |
API spe 131:2004/ |
mg/gm of |
400 - 450 |
|
Dry Mesh % Passing 200 |
IS:6186-1986 |
% |
90 Minimum |
We are one of the leading manufacturer, exporter and supplier of Calcium Bentonite Lumps based in Madvi, Gujarat, India. The calcium bentonite lumps we offer are useful adsorbent of ions in solution, fats and oils. We offer these products to our clients at a reasonable price which are available in bags of various quantities based on the clients requirement. The products we offer are packed using premium quality packing materials in accordance with the industrial standards.
