LABeQ Exports

Ambala Cantt, Ambala, Haryana

this apparatus is made of polyethylene has three main portions. The top portions is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulfide in the base of the apparatus. Hs gas then evolved collects in the middle dome from where it can be released through a leak proof stopcock fitted with a self lubricating ptfe plug. The base is provided with a residual outlet fitted with a cap for easy cleaning. In size : 250, 500 & 1000 mm

Owing to the years of industrial experience, we have been able to provide our valued clients with a wide range ofLaboratory Burette.

in order to cater the diversified demands of our clients, we have been able to provide a unique range ofplastic conical flask.

• a common use for desiccators is to protect chemicals which are hygroscopic or which react with water from humidity.
• these are made of polypropylene and polycarbonate.
• the autoclave vacuum desiccators can hold vacuum upto 740mm of hg for 24hrs. Without any greasing.
• the top dome, moulded in rigid and transparent polycarbonate, gives a crystal clear view of the desiccant placed inside.
• the knurled knob on the top provides easy handling of the dome.
• the lower part is made of polyproptlene.
• an internal groove is provided on the flange to hold a silicon rubber o-ring.

#cat.no.i.d. Mm.

• these are precision-made, high-strength tubes ofglassorplasticmade to fit exactly in rotor cavities.
• they may vary in capacity from 50 ml down to much smaller capacities used in microcentrifuges used extensively in molecular biology laboratories.
• microcentrifuges typically accommodate disposable plastic microcentrifuge tubes with capacities from 250lto 2.0ml.
• centrifuge tubes with round bottom are moulded in polypropylene & poly carbonate.
• available in 15 & 50 ml. Capacity

• a handy, little, space saver, this circular twelve place polypropylene test tube stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate.
• the base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings.
• this autoclavable rack can be easily disassembled for cleaning purpose. 19 mm. & 25 mm. Tubes
• it is a laboratory equipment that is used to hold upright multiple test tubes at the same time.
• it is most commonly used when various different solutions are needed to work with simultaneously, for safety reasons, for safe storage of test tubes, and to ease the transport of multiple tubes.

#cat.no.particularsstandard packing

• this is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm.
• the heavy base measures 225 mm in diameter and a polypropylene coated square rod measuring 375 mm in length is screwed into the base.
• the top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base.
• these discs can be adjusted on the rod according to the length of the pipette.
• the arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.

#cat.no.particularsstandard packing

• this burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating ptfe plug.
• each burette is individually calibrated to give maximum accuracy.
• acrylic body is unaffected by dilute mineral acids and bases except hydrofloric acid and ammonium hydroxide.

• the moulded chuck has a silicon rubber collet inside it to hold the various pipettes of the standard sizes.
• it resists the acids & the alkalies and can be easily disassembled for thorough cleaning.
• it is for cleaning the sizes 2 ml, 10 ml & 25 ml.

#cat.no.particularsstandard packing

• these wide mouth reagent bottles are available in polypropylene as well as polyethylene.
• the pp bottles are rigid, translucent and have excellent contact clarity.
• these bottles can be autoclaved filled as well as empty.

#cat.no.particularsstandard packing

• these bottles are also made of the low density polyethylene and are therefore translucent and unbreakable.
• the distinguishing feature is that these bottles contain the built in delivery tube making it a one-piece wash bottle.
• these bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed.
• available in capacity 125 , 250 , 500 & 1000 ml.

#cat.no.particularsstandard packing

Features :

• It is a pipe with a wide mouth and a narrow stem.
• It is used to channel liquid or fine-grained substances into containers with a small opening.
• Without a funnel, spillage may occur.
• These long stem funnels have smooth walls, 60 cone angle and external ribs to prevent air lock.
• Moulded in polypropylene, these clear funnels can also be steam autoclaved. In 50, 62, 75, 100 & 150 mm.
• A flat funnel, made of polypropylene, utilizes living hinges and flexible walls to fold flat.

• these dishes usually feature the rings and/or slots on their lids and bases so that when stacked, they are less prone to sliding off one another.
• these dishes are often used to make the agar plates for microbiology studies.
• the dishes are moulded in polypropylene therefore are clear & unbreakable.
• the moulding material being polypropylene, still these can be repeatedly autoclaved.
• the ridges on the inner side of the cap prevent the base from sticking to the cap.
• it is available in size 50, 75, 100, 125 & 150 mm

#cat.no.particularsstandard packing

• this tray is moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware and other laboratory instruments.
• these steam autoclavable trays have tapered walls which prove good for nesting. Available in size : i75 x 300 x 75 mm & 450x 350 x 75 mm.

#cat.no.particularsstandard packing

• these clamps are moulded in polypropylene making it completely corrosion-proof.
• the spring loaded jack in the middle provides a vice like grip to the burette and prevents it from slipping.
• two tapered wedges are provided to ensure firm grip on rods having dia 1/2 or 3/8.

#cat.no.particularsstandard packing

• these non-corrosive, moulded stands provide excellent replacement for the metal ones.
• even the metallic rod has a polypropylene covering making it non-corrosive.
• the rod measuring 12.5mm x 750mm can be screwed into the heavy base giving way to a perfectly stable stand.
• it is a piece of scientific equipment, clamps can be attached to hold other pieces of equipment.
• for instance, burettes, commonly used for titration experiments, test tubes and flasks.
• this stand is a general piece of lab equipment that can be used to help with holding other equipments and glasswares.

#cat.no.particularsstandard packing

• blown in low density polyethylene, this bottles dispense small uniform drops of liquids when pressed lightly.
• available in capacity 60 & 125 ml.

#cat.no.particularsstandard packing

• measuring cylinders, moulded in polypropylene, are single piece cylinder.
• these autoclavable cylinders have raised the prominent graduations for easy reading and have excellent contact clarity.
• the broad base provides good stability.

available in capacity :10 , 25, 50, 100, 250, 500, 1000, 2000 ml.

#cat.no.particularsleast countstandard packing

with an impressive growth record in this highly competitive industry, we are providing a qualitative range ofmagnetic stirrer.

product details:

relying on our expertise in this domain, we are engaged in offeringlaboratorypolypropylene beakerto our respected clients.

backed by profound experience of our experts, we are an unparalleled name engaged in providing a high-quality assortment oforbital shaking incubator.

product details:

• it is a glass object used for holding fluids and chemicals in a laboratory setting
• these are moulded in polypropylene, have excellent clarity and very good chemical resistance.
• the autoclavable beakers have prominently raised graduations on the outer surface.

#cat.no.particularsleast countstandard packing1b-0150 ml.512 pcs.2b-02100 ml.512 pcs.3b-03250 ml.1012 pcs.4b-04500 ml.1012 pcs.5b-051000 ml.256 pcs.6b-062000 ml.2506 pcs.