Mumbai, Maharashtra, India
GST : 27AFNPM3138D1ZH
Verified
Add Review
Our Products
LABIN Make High and Low Pressure Cylinder Regulators for Toxic/Corrosive/Flammable/inert gases.
MOCBrass c.p./ SS304 / SS316L
Details
Gas Cylinders
Brand new, filled gas cylinders outright sale with following documents
Holding Bracket
MOCM.S. Fabricated and Epoxy powder coated with Cylinder supporting Safety Chain for securing the heavy cylinders of 47 Ltr. WC
LABIN GDP to provide for an equal distribution of each of GC gases like Air, N2, H2, He, Ar. & others. Especially uses for more than one GC Instruments.
LABIN Provide 3 types of Model as per below. Model: T, TG, TGR
Gas Selector PanelLABIN Make Gas Selector Panel for changing the outlet carrier gas flow either Nitrogen or Helium gas without halting your analysis.
LABIN Make IMF use for to Remove dust particles up to 0.5 micron from inert gases
High Pressure Gas ManifoldIn this system if one cylinder gets empty we can immediately switch on to another cylinder (Manually/Auto) without halting the analysis and without dismantling the regulators from the empty cylinder.
Models
High Pressure PigtailsMOC: ¼” ID x 1 mtr. Long plain teflon tube with outer SS Wire braiding. Both end 5/8” BSP [RH/LH] Male Bull Nozzle as per IS: 3224 Connect for Cylinder to Manifold
High Pressure Pigtails Types
Inner Chamber: SS duly polished
outer chamber: MS Powder coated / SS
Insulation: Duly insulated by P.U.F.
Flow: 20 Lpm at height of 1 meter
Tank Capacity: 8 Ltr. & 15 Ltd.
Max. pressure: 15 psi
Additional Information:
Payment Terms :
Packaging Details : P&F Charges: Extra@3%
Freight Charges: Extra
Delivery Time : 3 - 4 Weeks
Tow Models:
15 Samples
50 Samples
Additional Information:
Payment Terms :
Packaging Details : P&F Charges: Extra@3%
Freight Charges: Extra
Delivery Time : 3 - 4 Weeks
Range
Additional Information:
Delivery Time : 2 weeks
LABIN Designs especially for Analytical/Chromatography Instruments.
Benefit:
Features:
GASES: AIR/N2/H2/HE/AR OR OTHER GASES
Range
Gas Cylinders:AAS/ICP Grade DA/N2O/AR gas cylinders
Brand new, filled gas cylinders outright sale with following documents:
Holding Bracket:If you are going to remove the Cylinder from the trolley and going to place it free (Loose) in the Lab / Floor, It is highly recommended that you keep them fastened with wall Mounting Brackets in order to avoid fall of cylinders accidentally.
MOC: M.S. Fabricated and Epoxy powder coated with Cylinder supporting Safety Chain for securing the heavy cylinders of 47 Ltr. WC
Additional Information:
Payment Terms :
Packaging Details : P & F Charges: Extra
Freight/Insurance Charges: To Pay Basis
Delivery Time : Ex. Stock OR 3 - 4 weeks
Details
Additional Information:
Payment Terms :
Packaging Details : P&F CHARGES: EXTRA@3%
FREIGHT CHARGES: TO PAY BASIS
Delivery Time : 3 - 4 Weeks
Details
Additional Information:
Payment Terms :
Packaging Details : P&F CHARGES: EXTRA@3%
FREIGHT CHARGES: TO PAY BASIS
Delivery Time : 2 - 3 Weeks
To maintain a constant thermal environment in the flame, it is imperative that the gas pressure & gas flows be held constant while the flame spectrometer is operating.
LABIN pressure regulators for the DA/N2O/AR gas
Pre Heater for N2O gas
MOC: BRASS C.P. / SS36L
Additional Information:
Payment Terms :
Packaging Details : P & F Charges: Extra
Freight/Insurance Charges: To Pay Basis
Delivery Time : Ex. Stock OR 3 - 4 weeks
Range
Additional Information:
Payment Terms :
Packaging Details : Packing & Forwarding:Extra @3%
Insurance:Extra: 2%
Freight: To Pay basis
Delivery Time : 3 - 4 weeks
Details
Additional Information:
Payment Terms :
Range
Additional Information:
Payment Terms :
Packaging Details : P&F CHARGES: EXTRA@3%
FREIGHT CHARGES: TO PAY BASIS
Delivery Time : 3 - 4 Weeks
Cylinder Storage Cabinet:
Cylinder Storage Trolley:
gas purification panels are available in:
1- stg (for singel gas)
2- stg (for tow gases)
3- stg (for three gases)
4-stg (for four gases)
5- stg (for five gases)
Additional Information:
Payment Terms :
Packaging Details : P&F CHARGES: EXTRA@3%
FREIGHT: EXTRA AT ACTUAL
Pump type: Piston type
Motor: 0.75 HP
Speed: 1440 rpm
phase: 1- Phase
Insulation: F-Class
FAD: 110 lTR.
Max. Pressure: 100 psi
Additional Information:
Payment Terms :
Packaging Details : P&F Charges: Extra@3%
Freight Charges: Extra
Delivery Time : 2 - 3 Weeks
AAS requires Oil Free Compressed Air Supply of high flow rate which can be supplied by Oil free air compressor. Auto Drain Valve (Optional)
Dryer
Moisture & Dust filterMoisture free air must requires for AAS, filter of 25um & 0.1 um which is to be attached after air compressor to remove moisture & dust particles which gets drain by Manually Or Automatically
TubingAs per ASTM Standard SS304/ SS316, 1/8” OR ¼” OD, Instrumentation Tubing's with color coded sleeves, (Free from Oil & Grease, dust & other foreign material). Specially uses for Lab application.
Casing/Capping
Standard Fitting Kit1/8” / 1/4” OD Swagelok type SS Nut and Locking ferrules, Equal Tee, Equal Union and Misc. Hardware like Screws, Nails, drill bits, Teflon Tape etc.
Types of Fume Hood
Laboratory Furniture
Additional Information:
Payment Terms :
Packaging Details : P&F CHARGES: EXTRA@3%
FREIGHT CHARGES: TO PAY BASIS
Delivery Time : 4 - 6 Weeks
Additional Information:
Payment Terms :
Delivery Time : 2 weeks
Details
Additional Information:
Payment Terms :
Packaging Details : P&F Charges: Extra@3%
Freight Charges: Extra
Delivery Time : 3 - 4 Weeks
Details
Additional Information:
Payment Terms :
Packaging Details : P&F CHARGES: EXTRA@3%
FREIGHT CHARGES: TO PAY BASIS
Delivery Time : 2 - 3 Weeks
Range
Additional Information:
Payment Terms :
Packaging Details : P&F CHARGES: EXTRA@3%
FREIGHT CHARGES: TO PAY BASIS
Delivery Time : 2 - 3 Weeks
Ultrasonicator
Probe Sonicator
Additional Information:
Payment Terms :
Packaging Details : P&F CHARGES: EXTRA@3%
FREIGHT CHARGES: TO PAY BASIS
Delivery Time : 2 - 3 Weeks
Details
