• Orbital Shaking Incubator are specifically designed to have combined advantage of a closely controlled incubation/ storage temperature with orbital shaking necessary for many laboratory procedures such as tissue cultures, fermentation studies, enzyme reactions, controlled purification and ageing tests, growth studies etc.
• Constructed of double walls, the exterior is made of Sheet Steel beautifully powder coated and interior of Stainless Steel. The plexiglass door makes it possible to inspect specimen without disturbing the temperature. Powerful air circulator create positive air flow through the incubator.

• Made of stainless steel sheet. Top of the bath and concentric rings are made of stainless steel. Electrically operated on 220/230 volts A.C. with arrangement of 6/12 holes with plug and cord

• Temperature from ambient +5oC upto 250oC.
• Thermostatic control with a accuracy of +1oC.
• Double walled inside Aluminium / Stainless Steel and outer made of Mild Steel beautifully powder coated.
• To work on 220 /230 volts. A.C Supplied with or without air circulating fan but without thermometer.

• Inside of the Fume Cupboard is made from fiber glass reinforced plastic, which is acid/ alkali resistant, fitted with a sliding type closing shutters of imported acrylic sheet which can be kept at any desired height as per requriment. In side of the fumeing cupboard is provied with one tube light isolated from acid fumes, one stainless steel / FRP/ ceramic sink of small size, one swan neck water and one gas cock. The working top of the Fume cupboard is lined with FRP sheet. An electric panel fitted by the side of the sliding door is providing with one 15/250V Amp plug point with switch neon indicater lamp. This facilities to operate hot plate or any electrical equipment inside the cupboard. The leaves of the impeller used for exhaust are aerodynamically operated with suitable suction capacity.
• The ducting is done using PVC pipes of 6 diameter with rain protection cowl 3 meters of PVC pipe will be supplied along with the equipment. Bottom table on which Fume cupboard is placed is made from wooden frame covered with marine grade plywood laminated with melamine sheets. The table is provided with drawers and cupboard where chemicals and reagents or any other lab meterials could be placed.

Model : LT 15

• Equipped with compressor and heater to ensure temperature maintenance between 3 deg.C to 56deg.C
• High capacity pump to facilitate optimum and thawing of plasma.
• Micro processor based controller for precise monitoring and controlling of temperature at 4 deg.C
• Tray with individual compartment to ensure the ports of bags to be kept above water level during the processing
• Capacity :12 bags of Plasma in one cycle
• In put power supply :230 +/-10%V, 50Hz, and 15A single AC
• Operating Temperature :3.80C to 4.20C
• Programmable temperature range :30C to 560C
• Accuracy :0.50C
• Time for one process :50-60 minutes (for plasma bags stored at-40C)
• Tray :Staineless steel, removable tray of 4x3 Configurations, individual compartments for Holding plasma bags
• Voltage stabilizer :3KVA stabilizers
• Mechanism for thawing :Pumping mechanism by high capacity pump and maintenance of temperature by heater of compressor
• External Dimension (WXDXH) :825mm X 415mm x755mm
• Internal Dimension(WXDXH) :550mm x 310mm x255mm
• Castor wheels :Mounted on 2 lockable castor wheels ( 4nos)
• Temperature sensing method :Sealed sensor dipped directly in the water
• Approximate weight (Kg) :60kg

• Temperature range ambient temperature (room temperature) +5oC to 60oC
• Temperature controlled by Electronic Digital Temperature Controller cum Indicator with an accuracy of +1oC
• The humidity is controlled by electronic digital humidity controller cum indicator from atmospheric humidity to 95% with a sensitivity of + 3%
• Double walled - inside of anodized Aluminum/Stainless Steel and outside of Mild Steel beautifuly powder coated with full view inner glass door
• To work on 220/230 VAC- But without Hygrometer.

• Orbital Shaking Incubator are specifically designed to have combined advantage of a closely controlled incubation/ storage temperature with orbital shaking necessary for many laboratory procedures such as tissue cultures, fermentation studies, enzyme reactions, controlled purification and ageing tests, growth studies etc.
• Constructed of double walls, the exterior is made of Sheet Steel beautifully powder coated and interior of Stainless Steel. The plexiglass door makes it possible to inspect specimen without disturbing the temperature. Powerful air circulator create positive air flow through the incubator.

• Made of stainless steel sheet. Top of the bath and concentric rings are made of stainless steel. Electrically operated on 220/230 volts A.C. with arrangement of 6/12 holes with plug and cord

• Temperature from ambient +5oC upto 250oC.
• Thermostatic control with a accuracy of +1oC.
• Double walled inside Aluminium / Stainless Steel and outer made of Mild Steel beautifully powder coated.
• To work on 220 /230 volts. A.C Supplied with or without air circulating fan but without thermometer.

• Inside of the Fume Cupboard is made from fiber glass reinforced plastic, which is acid/ alkali resistant, fitted with a sliding type closing shutters of imported acrylic sheet which can be kept at any desired height as per requriment. In side of the fumeing cupboard is provied with one tube light isolated from acid fumes, one stainless steel / FRP/ ceramic sink of small size, one swan neck water and one gas cock. The working top of the Fume cupboard is lined with FRP sheet. An electric panel fitted by the side of the sliding door is providing with one 15/250V Amp plug point with switch neon indicater lamp. This facilities to operate hot plate or any electrical equipment inside the cupboard. The leaves of the impeller used for exhaust are aerodynamically operated with suitable suction capacity.
• The ducting is done using PVC pipes of 6 diameter with rain protection cowl 3 meters of PVC pipe will be supplied along with the equipment. Bottom table on which Fume cupboard is placed is made from wooden frame covered with marine grade plywood laminated with melamine sheets. The table is provided with drawers and cupboard where chemicals and reagents or any other lab meterials could be placed.

Model : LT 15

• Equipped with compressor and heater to ensure temperature maintenance between 3 deg.C to 56deg.C
• High capacity pump to facilitate optimum and thawing of plasma.
• Micro processor based controller for precise monitoring and controlling of temperature at 4 deg.C
• Tray with individual compartment to ensure the ports of bags to be kept above water level during the processing
• Capacity :12 bags of Plasma in one cycle
• In put power supply :230 +/-10%V, 50Hz, and 15A single AC
• Operating Temperature :3.80C to 4.20C
• Programmable temperature range :30C to 560C
• Accuracy :0.50C
• Time for one process :50-60 minutes (for plasma bags stored at-40C)
• Tray :Staineless steel, removable tray of 4x3 Configurations, individual compartments for Holding plasma bags
• Voltage stabilizer :3KVA stabilizers
• Mechanism for thawing :Pumping mechanism by high capacity pump and maintenance of temperature by heater of compressor
• External Dimension (WXDXH) :825mm X 415mm x755mm
• Internal Dimension(WXDXH) :550mm x 310mm x255mm
• Castor wheels :Mounted on 2 lockable castor wheels ( 4nos)
• Temperature sensing method :Sealed sensor dipped directly in the water
• Approximate weight (Kg) :60kg

• Temperature range ambient temperature (room temperature) +5oC to 60oC
• Temperature controlled by Electronic Digital Temperature Controller cum Indicator with an accuracy of +1oC
• The humidity is controlled by electronic digital humidity controller cum indicator from atmospheric humidity to 95% with a sensitivity of + 3%
• Double walled - inside of anodized Aluminum/Stainless Steel and outside of Mild Steel beautifuly powder coated with full view inner glass door
• To work on 220/230 VAC- But without Hygrometer.