Our Products
Pneumatic Automatic Gas Changeover & Gas Piping LabLink provide complete solution for Laboratory Gas Piping.
Labo VSC - 100 kinematic viscosity bath is digital and easy to use universal device which provides appropriate measurements to the standards of ASTM D455 and TS 1451 EN ISO 3104. Measurements can easily be done by watching from lucid glass surface and semi-automatically. Many U tubes measurement systems like ubbelohde, micro ubbelohde, cannon-fenske, micro -ostwald. etc. can be used. Water or silicone oil can be preferred as bath liquid. To work at the temperature which are under the room temperature viscosity baths, which can easily connect and work integrated with Labo Refrigerated Circulators, are used commonly at mineral oil, chemistry, petrochemical, textile, plastic and polymer materials measurements. Working temperature can be easily changed and watched by digital screen in VSC-100 model which you can hold 3 different samples at ready.
Description :
Lablink XtraPure Water System provides you reliable and compact system which produces Ultra-Pure Water System always ensures high comfort at low operating cost. XtraPure System is equipped with reverse osmosis (RO) and additional filtration system to produce de-ionized water. The deionized water can be dispensed straight from reservoir. Further Ultra-Pure Water is produced with a combination of optimized cartridges with UV & other polishers. UV & other special polishers take extra care of water to make Pyrogen Free with facility of circulating water with in unit through 0.2 m filters. System display shows real time conductivity & TDS of Ultra-Pure Water. The input water required is DM water / RO water or Municipal Water. Easy to install, repair, plug and play. Suitable for Indian Conditions. Very low consumable cost. System have calibrated conductivity meter display. Continuous conductivity of final outlet water with alarm facility. Design of the instrument is electrically and electronically safe as the control box never comes in touch with water which enhances safety.
Specification :
(For Dissolution Apparatus application) Lablink DISSO Pure Water System provides you reliable and compact system which produces Pure Water. System always ensures high comfort at low operating cost. Disso Water System is equipped with reverse osmosis (RO) and additional filtration system to remove dust, oil mud from water. This water further processed with a combination of optimized cartridges with UV & other polishers. UV & other polishers take extra care of water to make pure water. 2 models are available on basis of flow rate for DISSO Pure Water 50 LPH & 75 LPH. The input water required is DM water/RO water or Municipal Water. Easy to install, repair, plug and play. Suitable for Indianconditions. Very low consumable cost. Design of the instrument is electrically and electronically safe as the control box never comes in touch with water which enhances safety.
Organomation's nitrogen evaporators (N-EVAPs) are extremely well suited for numerous sample preparation methodologies. We have created a diverse product line with instruments ranging from six to forty-five sample positions. Our nitrogen evaporators utilize adjustable nitrogen blow down technology allowing full control of nitrogen flow to samples, with no wasted nitrogen gas. We combined this technology with uniform efficient heat applied through either water or dry baths. This simultaneously maximizes solvent evaporation in the samples being concentrated and saves the lab money. Our instruments are the most reliable in the field, but if they ever do break down, we provide affordable repair services for all of our instruments and baths. Please continue to our catalog for more information regarding our nitrogen evaporator products.
Specification :
Gainingtherighttoameasuringinstrumentcapableofmeasuringortestingtheability oftheprocessiscalledcalibration.Themostcommonmethodsfortheheatcalibrationis liquid calibration baths. Thesearethe main characteristics sought in thebaths:
>Reaching the desired temperature in a very shorttime
>Holding the liquid temperature stable verysensitively
>Easy to do measurements with all temperaturesensors
Labo Calibration Bathsaredeveloped for these features. The products whichareuni-versal modelsareappropriate to all temperature calibration measurements andcorre-spond all needs of theirusers.
H (Heater) seriescirculators have only heating feature
and are used to work between at ambient temperature
(can be +5 C higher than ambient temperature) and
100 C. Because of their PID control system, they are
suitable for precise temperature applications.
Internal liquid circulation, stainless steel bath surface,
easy fluid drain system and the PID control system are
common features for all models.
If external liquid circulation is requested, the models
which have external liquid circulation feature should
be preferred.
CH1000
Chiller equipments which designed for applications that require high cooling capacity, are external circulation featured models. Liquids in baths (water,
alcohol, antifreeze, etc.) are sent to different cells and devices with external liquid circulation pump. The liquid which loaded heat where it goes and
returns to the bath, is sent to the system with cooling again.
Coolers which produced by Labo are classified in class of mini chiller devices and do not cause high noise and heat like industrial chiller devices.
Labochiller devices are preferred for their cooling abilities but they are equipped as a heater when its needed.
The S-EVAP-RB solvent evaporator for round flasks allows for up to 5, 8 or 10 samples to be concentrated at once. S-EVAPs have a broad range of applications including oil and grease analysis using Freon and other approved solvents and concentrating extracted materials from Soxhlet operations. The instrument consists of a base and stand assembly, mounted in a shallow round bath. The entire instrument rotates so that all samples are accessible from the front. At each sample position the round sample flask rests on the bath cover disk and is heated by hot water and steam. The solvent boils from the flask and cools in the condenser which is attached to a centrally located water manifold. The solvent leaves the condenser through a specially designed side arm into either an individual collection flask or a centrally located solvent collection vessel. Solvent recovery through individual or central collection options reduces laboratory emissions and increases laboratory and environmental safety.
Soxhlet extraction is ideal for extracting soluble analytes from a solid sample into an organic solvent. Unlike traditional wire or sand baths which are used to heat receiving flasks, the ROT-X-TRACT-S uses a water steam bath which provides gentle even heat to delicate samples. The ROT-X-TRACT-S rotary Soxhlet extractor can accommodate 5, 8, or up to 10 Soxhlet extractors. The bath cover disc holes can accommodate round sample flasks from 125 ml-1 L. A wide range of sample sizes and quantities make this instrument ideal for Soxhlet extraction of samples in any lab.
Specification :
Organomations line of MULTIVAPs are extremely versatile and user friendly instruments. The 9, 30, 48, and 80 position MULTIVAPs are high temperature dry block models. Organomations line of MULTIVAPs are extremely versatile and user friendly instruments, the 64 and 100 positions models utilize our classic water bath to maximize evaporation.