• For cables RG-174, RG-316, LMR-100
• For cables RG-58, LMR-195
• Crimp Straight and Right Angle connectors
• PCB Mount Straight and Right Angle connectors

• MCX (F) Straight PCB Jack, 50 ohm
• MCX (F) Right Angle PCB Jack, 50 ohm

• MCX (M) Straight Crimp Plug for RG-174, RG-316, LMR-100, 50 ohm
• MCX (M) Straight Crimp Plug for RG-58, LMR-195, 50 ohm

• MCX (M) Right Angle Crimp Plug for RG-174, RG-316, LMR-100, 50 ohm
• MCX (M) Right Angle Crimp Plug for RG-58, LMR-195, 50 ohm

• MCX (F) Straight Crimp Jack for RG-174, RG-316, LMR-100, 50 ohm
• MCX (F) Straight Crimp Jack for RG-58, LMR-195, 50 ohm

• MCX (F) Right Angle Crimp Jack for RG-174, RG-316, LMR-100, 50 ohm
• MCX (F) Right Angle Crimp Jack for RG-58, LMR-195, 50 ohm

Lambdoid wireless communications manufactures stand alone street lighting systems meant for illuminating streets/ gardens using solar energy. The system has Solar Photo Voltaic module which converts the sunlight into electricity which charges the battery with a high efficiency solar charge controller circuits during the day light. The systems have one or more mountable light units fitted with high power LEDs to operate during the night time.

• Eco-friendly / Low maintenance,
• Simple installation and light weight,
• Very low noise,
• Safe for users, easy and convenient to use,
• High power LEDs used and easily upgradable,
• No Grid electricity used, hence no electricity bills,
• Substitute for lights which are not switched off during nights,
• Dusk to Dawn controller available,
• Long life, SMF batteries with protections and indications.

The advanced cell processing technology and automated production facilities produce a highly efficient photovoltaic module. The conversion efficiency of the solar cells reaches up to 15%. These cells are encapsulated between a tempered glass cover and an EVA (Ethylene Vinyl Acetate) with back sheet to provide maximum protection for all environmental conditions. The laminated parts, equipped with plug in connectors are installed in an anodized aluminium frame to provide structural strength and ease of installation.

• Residential Solar Power Systems
• Public and Industrial Solar Power Systems
• Solar for villages in remote areas
• Solar for homes & cottages
• Solar for Microwave / Radio repeater stations
• Solar for Medical facilities
• Small-scale irrigation pumping
• Road & Railway signals
• Solar Street lighting

• 1 year limited warranty on material and workmanship
• 20 years limited warranty on power output.

(Long term output warranty shall guarantee that loss of output is not more than 10% of the minimum warranty value of the product specifications within 10 years and is not more than 25% within 20 years after the purchase of the product by customer)

Lambdoid Wireless manufactures a wide range of solar PV charge controllers for home lighting, street lighting and other custom solutions. Solar Charge controllers (SCC) protect battery from over-charging and / or excessive discharge and they are an essential component for any PV solar system. Lambdoid has the state of art expertise in design and development of custom requirements.

• Excellent Charging Algorithm
• Required protections and indications
• Negligible Voltage drops
• Self consumption (

Model: LWC-LFL-AC-10

• High efficiency using PWM technology.
• High power and long life of COB.
• Excellent heat management
• Low Maintenance.
• Also available in DC (Solar).
• Customized Wattages available on request.

• Compact & Reliable
• Constant Current
• Non Isolated Design.
• Wires on both ends.
• LED open / short circuit protection.

Model: LWC-BULB-AC-05

• High power and long life of LEDs
• Excellent heat management
• Low Maintenance.
• Available in DC (Solar) as well.
• Also available in 7W and 12W.
• Customized wattages available on request.

SMA (M) to SMA (M)
- SMA (M) to SMA (F)
- SMA (M) to RP SMA (M)
- SMA (M) to RP SMA (F)
- SMA (F) to SMA (F)
- SMA (F) to RP SMA (F)
- SMA (F) to RP SMA (M)
- RP SMA (M) to RP SMA (M)
- RP SMA (M) to RP SMA (F)
- RP SMA (F) to RP SMA (F)