Anand, Gujarat, India
GST : 24CAEPP8556L1Z4
Verified
Add Review
Our Products
Additive Injection Panel (Block)
Cryogenic offers Additive injection panel is widely used for injecting additives into main product line (HSD, MS, SKO). This additive injection panel is installed mainly at distribution facilities.
It is very accurate in nature with low pressure drop.
It mainly consists of additive oval gear meter, solenoid valve, strainer, check valves, needle valves and completely mounted on stainless steel / Aluminum panel
Areas of application.
A petroleum
B oil
C chemicals
D fuels
E ink
F Dye
Proof of our quality and excellent price is the fact that over 250 panels were delivered to our customers by 2018.
The most important users of our additives injection panels are the corporates like Indian Oil Corporation Limited, Bharat Petroleum Corporation Limited, Hindustan Petroleum Corporation Limited.
Gas, LPG Metering Skid
Cryogenic manufacture complete skid for liquid and gas for measurement, control and filtration. this skids are fabricated with latest codes and international standard. metering system is manufactured for crude oil and hydrocarbon products such as LPG, Fuel Oil, Motor Spirit, Diesel, Kerosene.
Cryogenic normally manufacture skids as per general arrangement drawings, P & ID provided by contractor who is overall system integrator. we design and detail piping, skid, platform static equipments as per clients datasheet. Major capital items like flow meter, Batch controller, PLC, instruments are free issued by clients or can be purchased and integrate by us with due consultation with client.
We have wide range of approved WPS, PQR AND WPQ as per ASME SEC IX for different grade and class of materials and welding process of SMAW, GTAW, MIG. if required we can qualify WPQRs as per custom clients requirement as and when required.
This Skids Are Mainly Consists Of
Application
Marketing and Distribution. Truck loading facility (TLF) Tank Wagon Loading (TWL) Transportation and distribution of hydrocarbon. Manufactured and Supplied more than 200 skids which is installed in domestic as well as globally.
Additive Dosing Skid (For MS & HSD)
Cryogenic offers Additive dosing system is a very flexible System for the continuous and fully automatic dosing of additives into the main product line.
We offer different dosing skid depending on the number of Loading points for different process parameters. with this in line dosing system mixed products can be produced automatically and economically.
It mainly consists of additive storage tank, metering pump with flameproof motor, strainer, pulsation dampener, pressure gauge, non return valve, ball valve, back pressure valve to maintain the dosing pressure , base skid etc. product loading pump can be supplied along with the additive dosing skid (manual or pneumatically operated).
Alongwith this skid we also provide complete wiring with electrical control panel for operation and selection pump which can be integrated with batch controller unit or PLC.
The additive system can also be used for fuel colouring like Blue dye and marker dosing system. We offer additive dosing skid for MS, HSD, SKO.
Proof of our quality and excellent price is the fact that over 500 units were delivered to our customers by 2018.
The most important users of our additive systems are corporates like Indian Oil Corporation Limited, Bharat Petroleum Corporation Limited, Hindustan Petroleum Corporation Limited.
Liquid Metering Skid (Truck Loading Metering/Tank Wagon Loading)
Cryogenic manufacture complete skid for liquid and gas for measurement, control and filtration. this skids are fabricated with latest codes and international standard. metering system is manufactured for crude oil and hydrocarbon products such as LPG, Fuel Oil, Motor Spirit, Diesel, Kerosene.
Cryogenic normally manufacture skids as per general arrangement drawings, P & ID provided by contractor who is overall system integrator. we design and detail piping, skid, platform static equipments as per clients datasheet. Major capital items like flow meter, Batch controller, PLC, instruments are free issued by clients or can be purchased and integrate by us with due consultation with client.
We have wide range of approved WPS, PQR AND WPQ as per ASME SEC IX for different grade and class of materials and welding process of SMAW, GTAW, MIG. if required we can qualify WPQRs as per custom clients requirement as and when required.
This Skids Are Mainly Consists Of
Application
Marketing and Distribution. Truck loading facility (TLF) Tank Wagon Loading (TWL) Transportation and distribution of hydrocarbon. Manufactured and Supplied more than 200 skids which is installed in domestic as well as globally.
Master Meter Trolley
Cryogenic offers Mobile type Master flow metering skid consisting of Flow meter, Batch controller, strainer, Air eliminator, DCV, manifold with piping valves, 5 meter steel braided hose, fitting etc. This is mainly used for calibration of flow meter already installed in Gantry. This is used as in series with flow meter installed in gantry.
This flow meter can be PD Meter, Mass Flow meter or Turbine Meter with DCV piston type or Diaphragm Type with Strainer and Air Eliminator separate Unit or Combined unit. Main advantage of this unit is mobile in nature and able to calibrate installed PD meter from one end to last gantry end in least time.
Cryogenic also offers skid based flow metering skid with combination as per customer's requirement.
Ordering Code
*All above metering is in 150# if other class is required please consult factory
lpg vapour eliminator
we offer different size of gas/vapor separator for different products. it is mainly installed before mass flow meter . application of gas separator is to separate any vapor that arise in the flow will vent through top vent valve and which is collected in common vapor recovery tank. hence due to removal of vapor accuracy of the mass flow meter increases and hence accurate product reading will be shown by mass flow meter. we have supplied this equipments for products like lpg to various oil marketing companies like oil india ltd, ongc, hpcl and oem like emerson process management.
benefits
Blue Dye And Marker Injection Skid
Turbine meter generates pulses based on the Flow of product in the main pipeline header. These pulses are processed by the PLC for flow measurement of main product (SKO). Based On flow sensed in the main header, PLC will trigger a Start command for the Blue Dye pump (Motor) and also Open command for the solenoid (On Off) Valves on the delivery header of Blue dye skid. Blue dye will then be injected into main product line as per a pre set ratio (say 25 PPM) or by putting PD meter which will be connected to PLC.
For every pre determined quantity of SKO (say 500 Litres) flowing through the header, the PLC Shall permit the solenoid (On - Off) valve on the blue dye delivery line to be open for a given Length of time in order to dose required quantity of blue dye. The flow rate of blue dye is always a constant parameter based on the settings of the positive displacement blue dye pump. Based on this flow rate, PLC shall monitor the time duration for which the solenoid (On Off) valve shall Be in open condition. Once blue dye is dosed as per pre set ratio, PLC shall generate Close Signal For the solenoid (On Off) valve. Quantity of blue dye pumped by the blue dosed is determined By the fixed flow rate of the positive displacement Blue Dye Pump.
The dosing shall continue in cycles for every pre determined quantity (500 Litres) of the main product passing through the header. As the main product (SKO) flow rate increases, the blue dye dosing cycles will increase accordingly. Ratio and cycles can be changed manually through the PLC.
Pressure in blue dye line is maintained by back pressure valve and sensed by pressure switch.
Suitable HMI in the control unit shall be built to provide custom displays like Blue dye Motor Status, Solenoid (On Off) Valve Status, Blue dye Agitator Status, Flow rate of product in the main header, Quantity of blue dye dosed (based on no. Of times solenoid valve is energized) etc.
Overview Of Blue Dye Dosing Panel
Blue Dye Dosing panel ensure correct amount of Blue Dye dispensed at pre defined quantity set in PLC. The HMI provide display of On/Off status of Pump / Agitator, On/Off Status of Solenoid Valve, Flow rate of Main Product, and Quantity of blue dye dosed based on no of time solenoid valve is energized.
The system operates under following two modes as per selection from Local HMI.
HMI Provides Two Mode Of Operation
This Mode Settable By User From Local HMI
1. Auto Mode
Auto mode operates for Ratio Control Mode as per Selection.
For Ration control, the flow of main product (SKO) through its Turbine flow meter (Pulse generator) is Fed as an input to the PLC system. Pulses are processed by the PLC for flow measurement of main product.
Blue Dye dosing panel ensure that a correct amount of Blue Dye is dispensed with respect to Main product at all times on line in a predefined ratio ( set in the PLC) throughout the load cycle.
When a pre defined quantity packet for main product passed then respective Blue dye SOV will be energized for a given length of time for a dosing of Blue Dye. On dosing of pre defined quantity for Blue Dye Product, SOV will be de energized by PLC.
The flow rate of Blue dye shall be always a constant parameter based on setting of the positive displacement blue dye pump. Based on this flow rate, time duration shall be decided and fed to PLC as set point for solenoid ON time.
The Cycle continues during receipt in frequently dosing of packets of qty.
2. Manual Mode
Manual mode can be operated from Local HMI
User can Start / Stop Pump / Agitator manually.
User can on / off Solenoid Valve manually.
Major Components Of BLue Dye / Marker Dosing Skid
