Lion Industries

GIDC, Mahesana, Gujarat

We are one of the major Manufacturer and Supplier of L-Poxy Epoxy Grout from Vijapur in Gujarat. Our L-Poxy Epoxy grout is a 3 part system, where 3 independent components need to be combined together  and is very effective for jointing wall and floor tiles, particularly on surface with high chemical and sets and hardens without contracting.

 

Area of Application : The L- Poxy Epoxy Grout is intended for jointing wall and floor tiles, particularly on surface with high chemical and sets and hardens without contracting.

 

Feature and Benefits :

• Sterile

• Frost-Proof

• Hygienic and chemical resistant stain and bacterial resistant

• High Durable joints

• smooth surface

• Water proof

• High strength

• Non – Contracting

• High abrasion resistant

 

Method Applications :

• Joints should be free from efflorescence, laitance, dirt and other loose material.

• Removal thoroughly by dry brushing.

• Clean :All joints should be cleaned down by washing with water containing detergent, then with clean water.

• Ensure the joints are dry before grouting.

• Before commencing grouting the adhesive bed must be set. It is essential that the titles used are appropriate for the service conditions and are fixed in solid bed of adhesive i.e. ensuring that. As far as possible, no voids are left behind / beneath the tiles. Refer to the relevant product data sheet for setting / drying times.

• Protect open joints form contamination and ensure that they are clean, dry and free form loose debris prior to grouting.

• Do not grout at temp. less than 5C or in damp conditions.

 

Area of Applications :

• Wall

• Exterior

• Work Tops

• Hygienic Sterile Areas

• Floors

• Dry Areas

• Swimming pools

• Chemical Resistance

• Interior

• Wet Areas

• Hevily trafficked Floors

• Hydrotherapy Pools

 

Packing : 1kg and 5kg Available in more than 20 colours.

 

Application Mixing :

• The EPOXY GROUT consistency can be adjusted to suit the application and site conditions by varying the quality of Part C added to the mixed Part A and Part B.

• Before use shake the bottle of Part B and Stir Part A.

• Add all of Part B to all Part A in a suitable, clean container and thoroughly mix together

• If an electrical drill mixer is used, blend at slow speed (less than 300 rpm).

• Slowly add the required amount of Part C and mix until all the Part C has been dispersed and a uniform colour is achieved.

• Immediately pour the mixed grout onto the working area.

• The mixed EPOXY GROUT is usable for up to 45 min. at 27± 1C.

 

Coverage Estimates 

• Pack Size 5kg : Part (A) 1.00 kg, Part (B) 400 g and part 3.6kg

• Pack Size 1kg: Part (A) 180 gm, Part (B) 90 gm and part 730gm Coverage Consumption depend on joint width size of tiles and good workmanship.

 

Precaution & Limitation :

• Keep out of reach of children. Wear suitable protective clothing, gloves and eyes / face protection

• In case of contact with eyes rinse immediately with plenty of clean water and seek medical advice

 

Shelf life :

• Factory sealed bag of this product are guaranteed to be of first quality for Two (2) year* if stored off the ground in a dry area.
• High humidity will reduce the shelf life of bagged product.

 

Other Products Categories Available : Brings the Widest range of Construction Material & Chemical.

We are offering epoxy grout, lion l- poxy epoxy grout is intended for jointing wall and floor tiles, particularly on surface with high chemical and sets and hardners without contracting.